Post by: D Scott Johnson on April 20, 2012, 04:52:34 PM
I have the above 40 piece Donkee thumb mold/slug kit for sale.
I use the Wizard Plug material to make these and it works great.
14 oval mold from
14 round mold
(I know, the picture shows 15 blue oval and 13 round, but it is 14 in each)
3 - 1 1/8" outside molds
3 - 1 1/4" outside molds
3 - 1 3/8" outside molds
One release piece, two solid slug caps
All are in good shape except the #7 Round mold. It is in bad condition. It is the 15/16" round size. The #6 round shows signs of wear but still usable. But, I will send them along with the rest.
Make your own molds and slugs and save yourself a bundle.
$45 plus actual FedEx shipping.
Let me know if you have any questions.
Scott
Edited by D Scott Johnson on 4/20/2012 at 10:09 PM
Post by: pro shop guy on April 20, 2012, 05:58:03 PM
Post by: D Scott Johnson on April 21, 2012, 12:07:40 AM
Not laughing. The kit is actually pretty cool.
Select the size of outside mold you want: 1 1/8" (torquoise), 1 1/4" (dark purple), or 1 3/8" (light purple)
Decide if you are going to make an oval thumb or a round thumb
Select the size you want.
Place the outside mold over the insert and fit tightly
It does not work with the 3 to 1 ratio plug material.
You use the Wizard (or some other company) fast plug 1:1 ratio plug material. Mix up the plug and pour into the mold over the insert.
Let sit for about 2 hours (sometimes you can get by for a little less).
Remove the insert, tap out the oval or round thumb sleeve and insert into the bowling ball. Bevel as desired.
You can also make your own solid slugs, just don't put in an insert and use the slug cap.
Works really well.
Scott
Post by: D Scott Johnson on April 21, 2012, 12:08:39 AM
This kit is sold. Thanks for the interest.
Scott