win a ball from Bowling.com

Author Topic: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***  (Read 6633 times)

Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
*** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« on: April 23, 2011, 10:40:14 AM »

* * Price's Have Been REDUCED again * *



These sets are USED and some of them were BARELY used. They are all in GREAT SHAPE!

All of these Drill Bits are 100% Razor Sharp on the TIPS!

They are 1/2" inch Straight Shank.

Each set I have listed below is GILMAC Brand Drill Bits (unless specified otherwise).

Each set I have listed has pictures ATTACHED (along with the price and shipping). And as you can see in some of the pictures, there is some wear on some of the "shanks" (the part that fits up into the Drill Press) but that doesn't hurt anything because that is not what drills through the bowling ball anyways. EVERY Carbide Tipped Drill Bit in these sets have 100% RAZOR SHARP tips!

The value of each set is worth nearly 2-3 times this much if bought NEW)! But why buy NEW when these USED ones will work just as good!

 

I take MONEY ORDER and PAYPAL!

 

Please buy with confidence. I've been on EBAY under the name "kim_mart" for close to 10 years and have over 320 Positives and 0 Negatives and 100% POSITIVE Feedback!



16-Piece Carbide Tipped GILMAC Drill Bit set:

29/32, 27/32, 25/32, 15/16, 23/32, 7/8, 13/16, 5/8, 21/32, 3/4, 11/16, 31/32, 1-1/8, 1-1/16, 1-1/32, 1



  - - WAS:  $180.00 + $21.00 Flat Rate Shipping

  - - REDUCED PRICE:  $165.00 + $21.00 Flat Rate Shipping

  - - 2nd REDUCED PRICE:  $150.00 + $21.00 Flat Rate Shipping



15-Piece Carbide Tipped GILMAC Drill Bit set:

29/32, 27/32, 25/32, 15/16, 7/8, 13/16, 5/8, 21/32, 3/4, 11/16, 31/32, 1-1/8, 1-1/16, 1-1/32, 1



  - - WAS:  $175.00 + $21.00 Flat Rate Shipping

  - - REDUCED PRICE:  $160.00 + $21.00 Flat Rate Shipping

  - - 2nd REDUCED PRICE:  $145.00 + $21.00 Flat Rate Shipping



19-Piece Carbide Tipped GILMAC Drill Bit set:

29/32, 27/32, 7/8, 5/8, 21/32, 3/4, 11/16, 1-1/16, 1-1/32, 1

(the following are EBONITE'S) 23/32, 15/16, 25/32, 1-1/8, 31/32, 63/64, 61/34, 1-3/32, 1-1/64



  - - WAS:  $200.00 + 21.00 Flat Rate Shipping

  - - REDUCED PRICE:  $185.00 + $21.00 Flat Rate Shipping

  - - 2nd REDUCED PRICE:  $170.00 + $21.00 Flat Rate Shipping


11-Piece Carbide Tipped GILMAC Drill Bit set:


29/32, 27/32, 7/8, 3/4, 1-1/32

(the following are EBONITE'S) 21/32, 1-1/16, 1-1/8, 31/32, 23/32, 61/64


  - - WAS:  $140.00 + $21.00 Flat Rate Shipping

  - - REDUCED PRICE:  $125.00 + $21.00 Flat Rate Shipping
  - - 2nd REDUCED PRICE:  $110.00 + $21.00 Flat Rate Shipping



12-Piece Carbide Tipped GILMAC Drill Bit set:

29/32, 27/32, 7/8, 13/16, 5/8, 21/32, 3/4, 11/16, 31/32, 1-1/16, 1-1/32, 1



  - - WAS:  $150.00 + $21.00 Flat Rate Shipping
  - - REDUCED PRICE:  $135.00 + $21.00 Flat Rate Shipping
  - - 2nd REDUCED PRICE:  $120.00 + $21.00 Flat Rate Shipping

 

Any questions... please message me on here. Or you can e-mail me at myrick_willard800@hotmail.com

Thanks!

 

 

 
 
Edited by Ric Clint on 5/8/2011 at 9:46 PM

 

Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #1 on: April 24, 2011, 07:05:27 PM »
ttt



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #2 on: April 26, 2011, 03:59:50 PM »
 

Prices have been REDUCED!!!

 

 

 



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #3 on: April 27, 2011, 08:42:27 PM »
ttt



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #4 on: April 28, 2011, 11:45:07 AM »
ttt



Pat Patterson

  • Hero Member
  • *****
  • Posts: 1852
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #5 on: April 28, 2011, 01:53:16 PM »
PM sent.


Pat Patterson
Pat Patterson

Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #6 on: April 28, 2011, 08:43:48 PM »
Message sent!

 

 

-------------------
 



Pat Patterson wrote on 4/28/2011 1:53 PM:
PM sent.


Pat Patterson



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #7 on: May 08, 2011, 09:53:39 PM »
Price's have been REDUCED... AGAIN!!!

 

Each set is now $30.00 CHEAPER than they were originally!!!

 

 

 



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #8 on: May 09, 2011, 07:37:51 AM »
ttt

 



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #9 on: May 09, 2011, 01:07:06 PM »
These are some great Drill Bits for anybody wanting to drill their own bowling balls at home or in a Pro Shop!

 

 

 



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #10 on: May 10, 2011, 04:11:25 PM »
ttt



Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #11 on: May 15, 2011, 09:57:28 PM »
ttt



OROCOVIS68

  • Newbie
  • *
  • Posts: 1
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #12 on: May 30, 2012, 04:50:14 PM »
<div><strong style="font-size: 18pt"><span style="font-size: 10pt">
</span><span style="font-size: 18pt">* * Price's Have Been REDUCED again * *</span></div>
<div></strong><span style="font-size: 10pt">

These sets are USED and some of them were BARELY used. They are all in GREAT SHAPE!</span></div>
<div>All of these Drill Bits are 100% Razor Sharp on the TIPS!</div>
<div>They are 1/2" inch Straight Shank.</div>
<div>Each set I have listed below is GILMAC Brand Drill Bits (unless specified otherwise).</div>
<div>Each set I have listed has pictures ATTACHED (along with the price and shipping). And as you can see in some of the pictures, there is some wear on some of the "shanks" (the part that fits up into the Drill Press) but that doesn't hurt anything because that is not what drills through the bowling ball anyways. EVERY Carbide Tipped Drill Bit in these sets have 100% RAZOR SHARP tips!</div>
<div>The value of each set is worth nearly 2-3 times this much if bought NEW)! But why buy NEW when these USED ones will work just as good!</div>
<div> </div>
<div>I take MONEY ORDER and PAYPAL!</div>
<div> </div>
<div>Please buy with confidence. I've been on EBAY under the name "kim_mart" for close to 10 years and have over 320 Positives and 0 Negatives and 100% POSITIVE Feedback!</div>
<div><strong>

16-Piece Carbide Tipped GILMAC Drill Bit set:</strong>
29/32, 27/32, 25/32, 15/16, 23/32, 7/8, 13/16, 5/8, 21/32, 3/4, 11/16, 31/32, 1-1/8, 1-1/16, 1-1/32, 1</div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0789.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0789.jpg</a></font></div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0790.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0790.jpg</a></font></div>
<div><strong style="font-size: 12pt">  - - WAS:</strong><span style="font-size: 12pt">  </span>$180.00 + $21.00 Flat Rate Shipping</div>
<div><strong>  </strong><strong style="font-size: 12pt">- - </strong><strong>REDUCED PRICE:</strong>  $165.00 + $21.00 Flat Rate Shipping<br style="font-size: 12pt" /></div>
<div>  <span style="font-size: 12pt">- - </span><u><em><strong>2nd</strong> <strong>REDUCED PRICE</strong></em></u><strong>:  $150.00 + $21.00 Flat Rate Shipping</strong></div>
<div><strong>

15-Piece Carbide Tipped GILMAC Drill Bit set:</strong>
29/32, 27/32, 25/32, 15/16, 7/8, 13/16, 5/8, 21/32, 3/4, 11/16, 31/32, 1-1/8, 1-1/16, 1-1/32, 1</div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0792.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0792.jpg</a></font></div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0795.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0795.jpg</a></font></div>
<div><span style="font-size: 14pt"><strong style="font-size: 12pt">  - - WAS:  </strong></span>$175.00 + $21.00 Flat Rate Shipping</div>
<div><strong> </strong><strong style="font-size: 12pt"> - -</strong><span style="font-size: 12pt"> </span><strong>REDUCED PRICE:</strong>  $160.00 + $21.00 Flat Rate Shipping</div>
<div><strong><span style="font-size: 12pt"> </span><span style="font-size: 12pt"> - -</span> <em><u>2nd REDUCED PRICE</u></em>:  $145.00 + $21.00 Flat Rate Shipping</strong></div>
<div><strong>

19-Piece Carbide Tipped GILMAC Drill Bit set:</strong>
29/32, 27/32, 7/8, 5/8, 21/32, 3/4, 11/16, 1-1/16, 1-1/32, 1</div>
<div>(the following are EBONITE'S) 23/32, 15/16, 25/32, 1-1/8, 31/32, 63/64, 61/34, 1-3/32, 1-1/64</div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0804.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0804.jpg</a></font>
</div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0817.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0817.jpg</a></font></div>
<div><span style="font-size: 12pt"><strong>  - - WAS:  </strong></span>$200.00 + 21.00 Flat Rate Shipping</div>
<div><strong>  - - REDUCED PRICE:</strong>  $185.00 + $21.00 Flat Rate Shipping
</div>
<div><strong><span style="font-size: 12pt"> </span><span style="font-size: 12pt"> - -</span> <em><u>2nd REDUCED PRICE</u></em>:  $170.00 + $21.00 Flat Rate Shipping


11-Piece Carbide Tipped GILMAC Drill Bit set:</strong>
</div>
<div>29/32, 27/32, 7/8, 3/4, 1-1/32</div>
<div>(the following are EBONITE'S) 21/32, 1-1/16, 1-1/8, 31/32, 23/32, 61/64</div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0827.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0827.jpg</a></font>

<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0831.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0831.jpg</a></font></div></div>
<div><span style="font-size: 12pt"><strong>  - -</strong> <strong>WAS:</strong>  </span><span style="font-size: 12pt">$140.00 + $21.00 Flat Rate Shipping</span></div>
<div><span style="font-size: 12pt"><strong>  - -</strong> </span><span style="font-size: 12pt"><strong>REDUCED PRICE:</strong><span style="font-size: 12pt">  </span>$125.00 + $21.00 Flat Rate Shipping
<span style="font-size: 12pt"><strong><span style="font-size: 12pt"> </span><span style="font-size: 12pt"> - -</span></strong> <strong><em><u>2nd REDUCED PRICE</u></em>:  $110.00 + $21.00 Flat Rate Shipping</strong>
</div>
<div><span style="font-size: 12pt"><strong>

12-Piece Carbide Tipped GILMAC Drill Bit set:</strong>
</span></span></span>29/32, 27/32, 7/8, 13/16, 5/8, 21/32, 3/4, 11/16, 31/32, 1-1/16, 1-1/32, 1</div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0797.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0797.jpg</a></font></div>
<div><font size="3" face="Times New Roman"><a href="http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0803.jpg">http://i277.photobucket.com/albums/kk66/MyrickWillard/100_0803.jpg</a></font></div>
<div><span style="font-size: 12pt"><strong>  - - WAS: </strong></span><span style="font-size: 12pt"> </span>$150.00 + $21.00 Flat Rate Shipping
<strong>  - -</strong> <strong>REDUCED PRICE:</strong>  $135.00 + $21.00 Flat Rate Shipping<br style="font-size: 12pt" /><span style="font-size: 12pt"><strong>  - -</strong></span> <strong><em><u>2nd REDUCED PRICE</u></em>:  $120.00 + $21.00 Flat Rate Shipping</strong>
</div>
<div> </div>
<div>Any questions... please message me on here. Or you can e-mail me at <a href="mailto:myrick_willard800@hotmail.com">myrick_willard800@hotmail.com</a></div>
<div>Thanks!</div>
<div> </div>
<div> </div>
<div> </div><div> </div><div>Edited by Ric Clint on 5/8/2011 at 9:46 PM</div>

Anno

  • Jr. Member
  • **
  • Posts: 60
Re: *** CARBIDE TIPPED Drill Bits - Price REDUCED again ***
« Reply #13 on: June 04, 2012, 11:51:18 AM »
Do you still have any sets for sale?