BallReviews
Equipment Boards => Hammer => Topic started by: charlest on May 23, 2008, 02:30:55 PM
-
Anyone have any idea if the Cut Throat's particles are sensitive to sandpaper or Abralon?
Do they need to be "processed" by Scotch Brite nylon pads.
I think I might like to restore my Razor Blade, which came 1000 grit matte. I don't want to sand the particles smooth with the resin base.
Thanks.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ (http://"http://home.mchsi.com/~s-cross-7-28-71/FAQ.htm")
-
charlest, I have had better luck with the abralon pads rather than scotch brite with the CT covers. The abralon pads leave the cover much "tackier" and smoother to the touch. The ball almost looks and feels filmy (if that makes sense) when I have used scotch brite on a CT cover. This seems to be the only cover I have an issue with scotch brite on. I have used the burgandy, green, and grey pads on the CT cover, all with minimal success. But, I have had no problem with any of the abralon pads (360, 500, 1000, 2000, or 4000). Good luck!
--------------------
MainePBA
"Power tends to corrupt absolute power corrupts absolutely." Lord Acton
Edited on 5/23/2008 10:49 PM
-
I've tried several surface changes on the RB with minimal success I mean bowling with it, not with the surface changes. (Then I tried to sell it and no one wanted it.) Maybe I can try it again and compare it to the BV some time this summer.
Thanks again.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ (http://"http://home.mchsi.com/~s-cross-7-28-71/FAQ.htm")
-
Have used Abralon some with factory finish polish or High gloss with good results, Had the Hawg and all of the deals cut throat is a great cover that for me like to be at least 2k with some shine to work best.
-
ebonite uses glass/silica particles so it's going to be a tough one, I would try using a scotchbrite pad then maybe hit it up with some Resurrection if it came with a sheen finish.
--------------------
www.ValentinoBowling.com
makers of Snake Oil & Resurrection
-
quote:
ebonite uses glass/silica particles so it's going to be a tough one, I would try using a scotchbrite pad then maybe hit it up with some Resurrection if it came with a sheen finish.
--------------------
www.ValentinoBowling.com
makers of Snake Oil & Resurrection
Thanks, Kevin!
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ (http://"http://home.mchsi.com/~s-cross-7-28-71/FAQ.htm")
-
Sandpaper is too abrasive so that it's gonna smoothen the edge of the "pores" on the entire surface of a ball created by the particles. My approach would be, burgandy pad, green pad, a good USED 500 abralon, then finish with a used gray pad, or a brand new gray pad, then light hit with the Ebonite Matte Finish, which leaves a sheen finish.
-
Its not like the particles are only on the top surface of the ball. Sanding with either is not going to eliminate them. And bowling with the ball generates much more friction than sanding, so you not going to "smooth" out particles that are "rough" and destroy the traction properties.
Just hot water bath and a normal resurface and it will be fine
--------------------
Team HammerHead
2008 USBC Nationals
ABQ, NM
"USBC is concerned that technology has overtaken player skill in determining success in the sport of bowling"
-
quote:
Its not like the particles are only on the top surface of the ball. Sanding with either is not going to eliminate them. And bowling with the ball generates much more friction than sanding, so you not going to "smooth" out particles that are "rough" and destroy the traction properties.
Just hot water bath and a normal resurface and it will be fine
--------------------
Team HammerHead
2008 USBC Nationals
ABQ, NM
"USBC is concerned that technology has overtaken player skill in determining success in the sport of bowling"
Depending on how soft the particles are, yes, whatever is sticking up above the level of the resin base in which they are embedded, they can be smoothed so they are only as rough as the grit level of the resin base which had bene sanded. This was proven with Columbia's original particles which were softer than the abrasive on wet/dry sandpaper and on/in Abralon pads: silicon carbide.
when you sanded Chaos and related balls, you virtually made the ball into a resin ball. You needed to use Scotch Brite nylon pads which did not affect the particles. So I was concerned how hard the particles were in the Cut-Throat coverstock.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ (http://"http://home.mchsi.com/~s-cross-7-28-71/FAQ.htm")
-
I resurfaced a Hawg Wild, took out a long cut half way around the ball, used Abralon Pads and it came out great. Never thought about using sandpaper, since Hammer and Ebonite use the Abralon Pads in the factory, they were good enough for me.
I've also resurfaced a couple Hawgs, same process and never saw any problems.
Now, that said, I tend to use the pads for just about every ball I've done. They are easier, safer with a CAB and I get more usage out of one pad than I did with one piece of sandpaper.
--------------------
az guy aka: R & L Bowlers Pro
rlbowlerspro@cox.net
-
Roger,
As long as I don't harm the particles, I couldn't care less which abrasive I use. I have almost all of them. I use what I need to use, first second, I use what is easiest and cheapest.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ (http://"http://home.mchsi.com/~s-cross-7-28-71/FAQ.htm")