win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Please help with layout for G-force  (Read 901 times)

tenpin

  • Hero Member
  • *****
  • Posts: 1681
Please help with layout for G-force
« on: February 12, 2007, 09:24:56 AM »
I am not familiar with drilling Lane 1 and would like to get a good drilling on this ball for heavy oil shots.  Ball has 2-3 pin and 3oz of top.  My personal profile is ball speed around 19mph.  PAP is 5 over 1/2 up.  Please help me out.  

Thanks,
--------------------

Logged

 

Sawuser

  • Hero Member
  • *****
  • Posts: 3700
Re: Please help with layout for G-force
« Reply #1 on: February 12, 2007, 05:31:12 PM »
I can't tell a lot by your provided info. If you don't track too close to the fingers or thumb, I would say drill it with the pin under fingers & cg slightly out or even the rico drill. Here is a link to the drilling info.

http://www.lane1bowling.com/tech/dspecs/ds_g-force.html
--------------------
Righty
Think about it!

It is impossible to govern rightly without God and the Bible. - George Washington

Logged

Doug Sterner

  • Hero Member
  • *****
  • Posts: 4395
Re: Please help with layout for G-force
« Reply #2 on: February 12, 2007, 05:56:06 PM »
My suggestion is to drill it with your favorite layout for a long rolling oil ball. For me my layout is pin right of and slightly below midline of ring and the cg kicked out from stacked by about an inch. Keep your finger weight under 1/2 oz and side weight around the same. Adjust the cover to get the desired reaction.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
Logged
Doug Sterner
Doug's Pro Shop
Owego, NY

Proud Member of the NRA
Fighting to uphold the Constitution of the U.S.

tenpin

  • Hero Member
  • *****
  • Posts: 1681
Re: Please help with layout for G-force
« Reply #3 on: February 12, 2007, 06:57:51 PM »
I was thinking of the Label drilling 1. How would this react for anyone that has this kind of layout? Do you know what kind of static weights I should try to end at?

http://www.putfile.com/pic.php?img=4473752

--------------------

Logged

tenpin

  • Hero Member
  • *****
  • Posts: 1681
Re: Please help with layout for G-force
« Reply #4 on: February 15, 2007, 06:12:58 AM »
I did drill mine last night.  I put the pin under the bridge alittle towards the rf and the cg kicked out.  I have not used it yet but will get to use it tonight or during the weekend.
--------------------

Logged

novawagonmaster

  • Hero Member
  • *****
  • Posts: 4279
Re: Please help with layout for G-force
« Reply #5 on: February 15, 2007, 05:54:55 PM »
I drilled mine Label 1:30 as you had thought about.
Ending weights are +3/4 side and +3/4 finger.
My PAP measurement is the same as yours...high track.
I am very happy with the results. It is very strong, yet smooth.
I have only used it for one set...Shark pattern in our PBA experience league.  The ball read the mids and made a nice move off the back of the pattern. I was 63 pins over average for the night. I am very happy with the ball itself, and the label drilling I chose for it.
--------------------
Jon (in Ohio)
CHROME WON'T GET YOU HOME!
F.O.S. Proud Saw user...see profile.
Logged

BeansProShop

  • Hero Member
  • *****
  • Posts: 3144
Re: Please help with layout for G-force
« Reply #6 on: February 17, 2007, 06:42:54 PM »
Tenpin,
That layout should work perfect.  If you do not have an extra hole and the ball is loping a little to much....Drill a 7/8" hole 4" from the center of your grip through the cg about 2 inches deep. Ending with negative weight is OK.  beans
--------------------
www.beansproshop.com



Here is a picture of the bottles......
http://i152.photobucket.com/albums/s181/bubby856/AllSauce.jpg


Prices All prices Include Shipping
8 oz. $12.00
16 oz. $20.00
32 oz. $37.00
64 oz. $65.00
1 Gallon $109.00

Thanks I will post videos of the polish in action very soon as well as putting together a website. Thanks for looking!!!

There are a few reviews of the polish is the MISC. section here on BV.

Beans


--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Lane#1 Buzzhead
Thanks for reading and be sure to check out my current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah

Official Pro Shop of "ALL" F.O.S. Members!!!
Logged
Looking for a great place to sell your bowling equipment?? Auction style,Fixed Price and FREE For A Limited Time! Try www.bestintheworldauctions.com and to Purchase The "Secret Sauce" visit www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Own
Pages: [1]
« previous next »