BallReviews

Equipment Boards => Lane #1 => Topic started by: buzzaussie299 on July 12, 2009, 05:35:23 PM

Title: cranberry buzzsaw
Post by: buzzaussie299 on July 12, 2009, 05:35:23 PM

have a cranberry c core drilled stacked.i have taken it to 4000 with high gloss.looks good but snaps really hard.......no carry.....what surface should i have on this baby.......save me a lot of experimentation....i bought it nib but she was dull and ugly looking lol
--------------------
black raspberry saw
emerald saw
enriched uranium stacked
pearl uranium
pearl carbide
xxxl starburst
h20 buzzsaw
solid uranium
bullet buzzsaw
tsunami
uranium hrg
supernova solid
chainsaw
dynamo
carbide plus
wanted single drill right hand silver diamond 15lb

Title: Re: cranberry buzzsaw
Post by: ballcollector on July 13, 2009, 01:44:59 AM

Cover prep depends alot on your speed and revs and lane conditions I prefer mine at 2000 abralon for oilier lanes  but if you are more speed dominant you may need it even duller if you bowl on medium conditions you may like it better at 4000 no polish

Title: Re: cranberry buzzsaw
Post by: bestbudzs24 on July 13, 2009, 01:50:45 AM

i dont have this ball anymore(wish i did lol)but i had mine at 2000 abrlon w/polish. with the 2k underlying grit it should burn off just enough energy to arc hard (not snap) and be more controllable on the backend. give it a try i think you will be pleasently surprised. how is it drilled?
--------------------
" bowling is for one thing and one thing only to make money"

Title: Re: cranberry buzzsaw
Post by: buzzaussie299 on July 13, 2009, 01:54:03 AM

thanks.its stacked and i have taken it to high i think,,4000 high gloss.....i will hit it 2000 with light polish to check it out....many thanx
--------------------
black raspberry saw
emerald saw
enriched uranium stacked
pearl uranium
pearl carbide
xxxl starburst
h20 buzzsaw
solid uranium
bullet buzzsaw
tsunami
uranium hrg
supernova solid
chainsaw
dynamo
carbide plus
wanted single drill right hand silver diamond 15lb

Title: Re: cranberry buzzsaw
Post by: jbuzz31 on July 13, 2009, 03:21:48 PM

Why not just knock the polish of and leave it at 4000 ?
--------------------
Ive Eaten From The Insane Root That Imprisons Reason

Title: Re: cranberry buzzsaw
Post by: 10pin hater on July 13, 2009, 03:43:05 PM

i have the same problem with mine can you let me know how that works for you  thanks

Title: Re: cranberry buzzsaw
Post by: Doug Sterner on July 13, 2009, 05:35:30 PM

original Brunswick applied surface was 400 with rough buff and a light polish if I recall.

Most PK18 balls tend to like something around 1000 to 1500 with a very light polish for most people...need more length, go finer in grit. Want more snap, add more polish.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
For Real Time Interactive Bowling Conversation:
BowlingChat.net (http://"http://www.bowlingchat.net")