Author Topic: dynamo surface (Read 3737 times)

rico4life · « **on:** September 29, 2009, 12:31:05 PM »

I was wondering what surface grit most people have on their dynamo's that they are having the most success with. I am considering take mine from 4000 abralon to maybe 1000 or 2000.

charlest · « **Reply #1 on:** September 29, 2009, 08:53:07 PM »

You already took it from 1000 Abralon to 4000 Abralon?

FYI The stock surface is 1000 Abralon, not 4000 Abralon, according to several previous Lane#1 posts in this forum.
--------------------
"None are so blind as those who will not see."

Edited on 9/29/2009 9:24 PM

zeusjr · « **Reply #2 on:** September 29, 2009, 09:01:25 PM »

I had mine at 1000
--------------------
My bowling site: http://home.comcast.net/~BandRBowling

My eBay site: http://shop.ebay.com/merchant/zeusjr73

Buzzhead · « **Reply #3 on:** September 29, 2009, 09:19:36 PM »

Mines at 2k with a smidge of beans sauce, lightly applied on a slow spinner. Love it, easy length with smackalakin turn to the pocket.
--------------------
FAILURE IS FEEDBACK. AND FEEDBACK IS THE BREAKFAST OF CHAMPIONS THAT GOT DIGESTED!

Ten pin?

?? Where?? I throw a BUZZSAW there is NUTTIN left on the deck...

Proud MEMBER of the FOS!!
Member of the FOS, if there happens to be a 9 pin standing just toss a saw and cut it down~~!

triggerman · « **Reply #4 on:** September 30, 2009, 07:26:02 AM »

to clarify the surface question again
14 and 16# balls appear to be 4k abralon, they have a very nice shine to them
15# balls appear to be 2k abralon, my oob RD was almost identical surfacewise as my OOB dynamo

as far as surface prep, straight from lane #1 and Global (you know the guys that pour the cover)
they suggest
1k underlying grit, if you want 4k finish, skip the steps in between, go from 1k straight to 4k
if you are going to polish go from 1k abralon straight to the polish. I have done both and both seem to be very good adjustments

I personally for my game will go 500, 1k, 600 grit wetsand, 1500 wetsand and then slight polish, wasnt suited for the heavy stuff but for true mediums, i had the best luck at that surface

right now I have it at 1k plus ebo factory refinisher, its a tad early for me, but with the sucess I am having with the RD I will probably take the dynamo back to 1k abralon no polish and use it for heavier oils
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby

Shermster · « **Reply #5 on:** October 06, 2009, 01:05:39 PM »

OOB skidded a bit too much for me on fresh. Dropped it to 2000 and it gripped too much. Currently at 2000+polish, works the best for me.

Roy Munson · « **Reply #6 on:** October 06, 2009, 01:32:00 PM »

I've tried a lot of surface modifications with this ball and I found success with:

500 Abralon heavy hand, 1000 Abralon light hand, 3M Rubbing compound
--------------------

Roy Munson: "Morning! I hope you don't mind, I got up a little early. So I took the liberty of milking your cow for you. Yeah, it took a little while to get her warmed up. She sure is a stubborn one. Then pow, all at once."
Mr. Boorg: "We don't have a cow. We have a bull."

***** Looking for Pearl Cherry C/2 *****
***** Looking for Pearl Cherry Bomb *****

jls · « **Reply #7 on:** October 08, 2009, 01:28:09 PM »

This is Oct of 09, and the ball came out in Feb of 09...And yet we still have a question as to what the box finish is on this ball...

Now if Trig thinks it's at 4000... That works for me...
--------------------
jls

Roy Munson · « **Reply #8 on:** October 08, 2009, 04:55:25 PM »

quote:
I was wondering what surface grit most people have on their dynamo's that they are having the most success with. I am considering take mine from 4000 abralon to maybe 1000 or 2000.

The poster does not ask the oob grit!
--------------------

Roy Munson: "Morning! I hope you don't mind, I got up a little early. So I took the liberty of milking your cow for you. Yeah, it took a little while to get her warmed up. She sure is a stubborn one. Then pow, all at once."
Mr. Boorg: "We don't have a cow. We have a bull."

***** Looking for Pearl Cherry C/2 *****
***** Looking for Pearl Cherry Bomb *****

jls · « **Reply #9 on:** October 08, 2009, 05:07:46 PM »

quote:
You already took it from 1000 Abralon to 4000 Abralon?

FYI The stock surface is 1000 Abralon, not 4000 Abralon, according to several previous Lane#1 posts in this forum.
--------------------
"None are so blind as those who will not see."

Edited on 9/29/2009 9:24 PM

"The poster did not ask"

True, but notice this person believes the ball is at 1000 oob, and another person seems to think it is at 4000 oob...

So once again, one would think that after 9 months, someone from Lane One would come on and put this to rest....

--------------------
jls

charlest · « **Reply #10 on:** October 08, 2009, 06:21:45 PM »

quote:
quote:
You already took it from 1000 Abralon to 4000 Abralon?

FYI The stock surface is 1000 Abralon, not 4000 Abralon, according to several previous Lane#1 posts in this forum.
--------------------
"None are so blind as those who will not see."

"The poster did not ask"

True, but notice this person believes the ball is at 1000 oob, and another person seems to think it is at 4000 oob...

So once again, one would think that after 9 months, someone from Lane One would come on and put this to rest....

--------------------
jls

The Lane#1 cognoscenti led me to believe, via posts here on ballreviews.com, that, although the Dynamo on the Lane#1 web site was said to be surface finished to P4000 grit, it was, in reality, finished to P1000 grit. I do not have one. I did not measure one. Pardon me (incredible sarcasm intended) for believing what those in know are supposed to have known!

I cannot believe that 14 lb. Dynamos and 16 lb. Dynamos were finished to a different surface grit level than 15 lb. Dynamos. If my production people did that in a manufacturing environment I owned, I would have fired them, as soon as I had learned about it, and apologized profusely to every purchaser of my product, offering to buy it back or make it right, at my own expennse. That is, if I wished to continue in business.

This being bowling, who gives a crap?
--------------------
"None are so blind as those who will not see."

Steven · « **Reply #11 on:** October 08, 2009, 07:38:29 PM »

quote:
The Lane#1 cognoscenti led me to believe, via posts here on ballreviews.com, that, although the Dynamo on the Lane#1 web site was said to be surface finished to P4000 grit, it was, in reality, finished to P1000 grit. I do not have one. I did not measure one. Pardon me (incredible sarcasm intended) for believing what those in know are supposed to have known!

charlest: Mine looked to be 1000 grit Abralon OOB. I've since finished it off at 2000 and 4000, and then back to 1000. My own finish at 1000 seems to be closest in appearance and reaction to original box. For THS conditions I see most, 2000 seems to be the sweet spot, so I'm leaving it there.

To this whole argument, my feeling is 'who cares?'. If you care about your surfaces, you're going to refresh them every 30 games or so. At that point, you take the opportunity to experiment with reactions between 1000-4000 and stick to what works best for you.

Gazoo · « **Reply #12 on:** October 08, 2009, 09:47:58 PM »

quote:
quote:
quote:
You already took it from 1000 Abralon to 4000 Abralon?

FYI The stock surface is 1000 Abralon, not 4000 Abralon, according to several previous Lane#1 posts in this forum.
--------------------
"None are so blind as those who will not see."

"The poster did not ask"

True, but notice this person believes the ball is at 1000 oob, and another person seems to think it is at 4000 oob...

So once again, one would think that after 9 months, someone from Lane One would come on and put this to rest....

--------------------
jls

The Lane#1 cognoscenti led me to believe, via posts here on ballreviews.com, that, although the Dynamo on the Lane#1 web site was said to be surface finished to P4000 grit, it was, in reality, finished to P1000 grit. I do not have one. I did not measure one. Pardon me (incredible sarcasm intended) for believing what those in know are supposed to have known!

I cannot believe that 14 lb. Dynamos and 16 lb. Dynamos were finished to a different surface grit level than 15 lb. Dynamos. If my production people did that in a manufacturing environment I owned, I would have fired them, as soon as I had learned about it, and apologized profusely to every purchaser of my product, offering to buy it back or make it right, at my own expennse. That is, if I wished to continue in business.

This being bowling, who gives a crap?
--------------------
"None are so blind as those who will not see."

Charlest,
I agree with your assessment on this subect. To let the appeareance that different weights had different grit levels is crazy.IMHO, what happend here is 500/4000 grit bowling ball. I suspect that companies have been doing it but it does look different than a ball taken up to 4000 from 500 each step.
--------------------
"I don't want to be remembered, I want to be forgotten"

rico4life · « **Reply #13 on:** October 08, 2009, 11:52:57 PM »

I just wanted to update on this. Lane #1 sent me a email that said the oob finish on this ball is closer to 2000 abralon. his kinda goes against what i have read from different posters on this site. I currently have this ball at 1000 abralon and it does come to life at this grit. You just better have enough head oil or just put it back in the bag.

buzzaussie299 · « **Reply #14 on:** October 09, 2009, 05:28:20 AM »

2000 with the sauce is the best for me......after about 10 games it came alive and the carry is unbelievable..
--------------------
black raspberry saw
emerald saw
enriched uranium stacked
pearl uranium
pearl carbide
xxxl starburst
h20 buzzsaw
solid uranium
bullet buzzsaw
tsunami
uranium hrg
supernova solid
chainsaw
dynamo
carbide plus
wanted single drill right hand silver diamond 15lb

Author Topic: dynamo surface (Read 3737 times)

rico4life

dynamo surface

charlest

Re: dynamo surface

zeusjr

Re: dynamo surface

Buzzhead

Re: dynamo surface

triggerman

Re: dynamo surface

Shermster

Re: dynamo surface

Roy Munson

Re: dynamo surface

jls

Re: dynamo surface

Roy Munson

Re: dynamo surface

jls

Re: dynamo surface

charlest

Re: dynamo surface

Steven

Re: dynamo surface

Gazoo

Re: dynamo surface

rico4life

Re: dynamo surface

buzzaussie299

Re: dynamo surface