I recently purchased an Enriched Uranium 15.03, 3.5 oz top weight and a 3.5 inch pin and was looking to drill it up for control. I have little experience with layouts, less with Lane #1, and none with this ball. I was hoping to get some suggestions from some of you who are more knowledgeable about this ball and layouts in general.  My specs are:
PAP: 5 1/2 over and 1 up
Rev''s: 300
17 mph
Axis rotation: 75 degrees
Axis tilt: ~30 to 35 degrees
My home lanes have been sold and will be closing so I am unable to tell you what lane conditions I will be using. Most of the houses around here are medium to less than medium. So I guess I'm looking at what might be used as a versatile layout for medium conditions.. I was thinking 4.5 x 3 with the pin above and to the right of the fingers- or will that hook and set?
Thanks in advance.

Well I have the Enriched Uranium and the first thing I noticed was that its reaction is very unique. It doesnt move like other balls I've ever seen. Check the videos of the lane1 site and you'll see what I'm talking about.

Well I first started with a pin under the bridge type drilling, CG kicked out and the ball either hooked too much inside, or never turned from outside, even on a regular shot. It burned up when swinging and never came back with enough energy to carry corners. I polished it up, sanded, tried many different surfaces and still did not find one I was happy with.

I redrilled the ball with the pin about an inch over my ring, roughly 5 1/2" away from my pap. Now the ball gets down the lane better, holds better inside and turns harder from outside. Much more controllable and the pin carry is just sick when it matches up. So if you try a stronger drilling and you get a weird type reaction, try a weaker one.
--------------------
If it weren't for electricity we'd all be watching television by candlelight.