win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Hybrid DB CG & Pin Position  (Read 1191 times)

StrokerCT1

  • Jr. Member
  • **
  • Posts: 23
Hybrid DB CG & Pin Position
« on: March 06, 2005, 03:38:06 AM »
I just bought a 16 lb Hybrid Dirty Bomb.  On Lane #1's drilling sheet
the pin is typically at the 12 o'clock position relative to the CG.  
(Directly Above). On this ball the pin is at about 12:30 relative to the
CG, above and somewhat to the right.  Does it make any difference ?
Lane #1's drilling sheet said the 12 o'clock position makes the ball driller
friendly for both left and right handed bowlers. Does the 12:30 position favor
a left or right handed bowler ?
Thanks !
Logged

 

StrokerCT1

  • Jr. Member
  • **
  • Posts: 23
Re: Hybrid DB CG & Pin Position
« Reply #1 on: March 06, 2005, 01:45:33 PM »
The ball is not drilled yet...

In the drill sheet for the ball (Pin is above) in 12 o'clock
position  

    pin

    cg


on this ball  (The pin is at 12:30 from the direction
pointed to by the CG.  Straight above the CG is to the
left of the pin

   pin

 cg

Logged

StrokerCT1

  • Jr. Member
  • **
  • Posts: 23
Re: Hybrid DB CG & Pin Position
« Reply #2 on: March 06, 2005, 01:47:03 PM »
The ball is not drilled yet...

In the drill sheet for the ball (Pin is above) in 12 o'clock
position  

pin

cg


on this ball  (The pin is at 12:30 from the direction
pointed to by the CG.  Straight above the CG is to the
left of the pin

x pin

cg

x is used to push the pin to the proper position
Logged

StrokerCT1

  • Jr. Member
  • **
  • Posts: 23
Re: Hybrid DB CG & Pin Position
« Reply #3 on: March 06, 2005, 03:31:32 PM »
Logged

scottie

  • Hero Member
  • *****
  • Posts: 710
Re: Hybrid DB CG & Pin Position
« Reply #4 on: March 06, 2005, 04:31:19 PM »
pin under with cg out about 2 inches works great!
Logged

StrokerCT1

  • Jr. Member
  • **
  • Posts: 23
Re: Hybrid DB CG & Pin Position
« Reply #5 on: March 06, 2005, 05:37:21 PM »
Logged

StrokerCT1

  • Jr. Member
  • **
  • Posts: 23
Re: Hybrid DB CG & Pin Position
« Reply #6 on: March 06, 2005, 09:08:11 PM »
any thoughts ?
thanks
Logged

JPRLane1

  • Hero Member
  • *****
  • Posts: 3318
Re: Hybrid DB CG & Pin Position
« Reply #7 on: March 07, 2005, 12:05:21 PM »
The logo and the CG are not to be confused.  The pin is always at 12 o'clock from the CG the logo may or may not be and usually isn't directly at 12 o'clock.  The cg is almost always in or near the label but I have seen them be outside of it.  Hope this helps the guy.  If your Cg isn't marked as I couldn't see it in the pic either then you need to have it found by your driller.
--------------------
Leader of Fellowship of the Saws! If its not a Buzzsaw it better be a Brunswick!
Come one, Come all but only if you wield the mighty Buzzsaw!
Honorary member of the almighty NATION!
Logged
Leader & Founder of Fellowship of the Saws! 03/04/05 Respect us or get left in our Saw Dust!
Level 2 Certified Coach!
Pages: [1]
« previous next »