win a ball from Bowling.com

Author Topic: drilled an emerald pin in, CG out... this thing moves!  (Read 952 times)

DonSVO

  • Hero Member
  • *****
  • Posts: 608
drilled an emerald pin in, CG out... this thing moves!
« on: April 03, 2004, 08:40:42 PM »
it is going to take me some time to get used to it, but this ball is a total handful.i think i found the pocket flush about 3 times my first game and every time, ten in the pit. the ball hooks more than anything in my bag by far. should i put a small weight hole in the PAP and try to tame it down some? i was wanting to use it for a wider array of conditions, not just the floods. i used it in a medium house and i was releasing the ball over the 3rd arrow to 6, and it would still find an excuse to go brooklyn.
--------------------
i don't care who makes it, how much it costs, or how sexy the ball looks. can i carry the 7 and level the deck with a $60 ball?

bring on the Lefty uprising!

 

Buzzhead

  • Hero Member
  • *****
  • Posts: 2002
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #1 on: April 04, 2004, 12:57:31 PM »
not the ball in most houses around here if I hit 6
with a Target Zone it is coming back brooklyn.
Play a tad more direct with the ball. 15 to 12 and I bet
it does not come anywhere near the pocket.
--------------------
Saws are made to cut ANYTHING including 10 pins
FAILURE IS FEEDBACK. AND FEEDBACK IS THE BREAKFAST OF CHAMPIONS THAT GOT DIGESTED!

Ten pin?????? Where?? I throw a BUZZSAW there is NUTTIN left on the deck...

Proud MEMBER of the FOS!!
Member of the FOS, if there happens to be a 9 pin standing just toss a saw and cut it down~~!

crankncrash

  • Hero Member
  • *****
  • Posts: 967
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #2 on: April 04, 2004, 06:20:04 PM »
I second that, the emerald is not that aggressive and if you think it will be  flood ball you are gonna be upset when you have a 10 pin ball and nothing to really throw

Curly

  • Hero Member
  • *****
  • Posts: 748
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #3 on: April 04, 2004, 06:32:59 PM »
He, he, he(Crank). I too, found the Emerald to be pretty weak. Weak, until I scuffed it with a bit-o-ScotchBrite. That thing started hooking at the top of my backswing! Adios Emerald. LOL!

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #4 on: April 04, 2004, 06:46:28 PM »
Quote
...." Adios Emerald. LOL! "
----------------------------------------------
I like mine, but darn it, my pal Curly doesn't like his...  LOL!

--------------------
Lane 1 - The Bowlers Company

Nothing hits as hard as an Uranium
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

DonSVO

  • Hero Member
  • *****
  • Posts: 608
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #5 on: April 05, 2004, 12:56:57 AM »
a more direct line makes it miss the headpin. as soon as this thing finds dry, it turns. period. i was playing 3rd arrow trying to give it more oil to eat before it hit the dry at 38'. well, i am going to throw it on my tuesday night and see how it does. that place sucks, its like bowling on ice. their version of a house shot is everyone elses sport shot, gutter to gutter. grrr.
--------------------
i don't care who makes it, how much it costs, or how sexy the ball looks. can i carry the 7 and level the deck with a $60 ball?

bring on the Lefty uprising!

crankncrash

  • Hero Member
  • *****
  • Posts: 967
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #6 on: April 05, 2004, 01:03:16 AM »
c'mon curly that thing got down the lane if you threw it! quit fluffin! nah just kiddin with ya, it really is a whole different ball when its scuffed. I thought it was the answer to your berry-blues, just about the same deal when it was dull, O and its pretty(tim needs to find more manly expressions!)

DonSVO

  • Hero Member
  • *****
  • Posts: 608
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #7 on: April 07, 2004, 12:48:47 AM »
mine is pretty clean, a 1600 grit finish. i am afraid to even let sandpaper within 3 feet of it!

took it to the 'oil shot' tonight. they had a lovely reverse block for our LEAGUE play. it was a new experience. anyways, luckily this thing cleared the heads. i let it drift to the oil on 8-9, and it would come back hard once it found the 40' mark. over 20 to 8 and back for a money shot. is the emerald supposed to be for such heavy oil? i am now STRONGLY considering drilling out 1/2 oz. in the PAP.
--------------------
i don't care who makes it, how much it costs, or how sexy the ball looks. can i carry the 7 and level the deck with a $60 ball?

bring on the Lefty uprising!

Charles

  • Hero Member
  • *****
  • Posts: 2363
Re: drilled an emerald pin in, CG out... this thing moves!
« Reply #8 on: April 07, 2004, 11:33:22 AM »
Don,
  If you get this message before this evening then great. If not, I'll pass it on when I get to the center. Anyway, first thing I would do BEFORE I took any weight out is polish the ball with a different grit. This may help get the ball down the lane further. Secondly, try a couple of different hand positions and/or releases for different lane conditions. The Emerald is a great ball but like all balls, takes a little experimenting with to find it's place in your arsenal. If none of this meets your satisfaction, then I would consider a little weighthole. See ya this evening.


--------------------
I am a Buzzsaw packing Hunter! You are the HUNTED!!!!!!!!!!!!