BallReviews

Equipment Boards => Lane #1 => Topic started by: jcardzcollects on April 17, 2007, 01:59:24 PM

Title: help with arsenal
Post by: jcardzcollects on April 17, 2007, 01:59:24 PM
I have the following in my arsenal and am a little confused on what shot/lane condtion to use each one. I am a med revs, 15 -17 mph stroker. My release is a bit unusual as I come out a bit on the side of the ball. I can bowl straight up the lan or swing the ball through the oil and bck in.
 here is what I carry in my bag all 15 lbs
 Uranium hrg
 solid uranium
 super carbide bomb
 cobalt bomb

Any help would be appreciated. I realize that different styles wll vary but just a general guide would be apprecitaed.
--------------------
take my wife but leave the bowling gear
Title: Re: help with arsenal
Post by: zeusjr on April 17, 2007, 10:40:12 PM
quote:
cobalt bomb


Is that the Solid or the Pearl?
Title: Re: help with arsenal
Post by: jcardzcollects on April 18, 2007, 01:14:07 PM
most drilled stacked and  the cobalt bomb is the polished one
--------------------
take my wife but leave the bowling gear
Title: Re: help with arsenal
Post by: triggerman on April 18, 2007, 01:17:12 PM
super carbide bomb soup
solid u heavy
pearl cobalt
hrg

big hole between the solid u and the pearl cobalt
add a carbide plus for that slot and an xxxl below the hrg and you are set
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby
Title: Re: help with arsenal
Post by: Retroman on April 18, 2007, 01:43:28 PM
In my opinion, Seeing how they are drilled, You may have some overlap in there, Some different pin placements above or below the fingers would help,With label drills or leverage, But at this point they are all stacked so unless you plug and redrill with different layouts right now, Your only choice is to change surfaces on the balls to get them to hook sooner(Sanding or scuffing) or go longer (Compounding or polishing)to acheive different reactions........my .02
--------------------
Tripping 10's, Its all about entry angle into the hole!!

Can you hear that? It sounds like a SAW
 
Cherry Pearl C/2 x3
Super Carbide Bomb
Black Cherry Bomb
Enriched Urainium
Enriched Urainium (NIB)
SCB
Urainium Solid
Cobalt Solid (NIB)
Crystal Diamond
                             


                             
F.O.S. Addiction

Edited on 4/18/2007 1:42 PM
Title: Re: help with arsenal
Post by: novawagonmaster on April 18, 2007, 03:30:35 PM
Super Carbide Bomb for floods.
Solid Uramium for heavy.
G-Force Nebula would fill your hole here for medium/heavy.
Cobalt pearl...medium.
HRG....medium/light (this ball also responds very well to scuffing the surface).
Bullet would come in handy for very light here.
XXXL or Crystal would be for burnt toast or spares.
--------------------
Jon (in Ohio)
CHROME WON'T GET YOU HOME!
F.O.S. Proud Saw user...see profile.
Title: Re: help with arsenal
Post by: jcardzcollects on April 20, 2007, 10:40:50 PM
Do have soem different pin placements, some pin above the ring finger and 1 below and 1 slighly beow nd to the side. I am not much n drilling and layouts, I usually go to my pro shop and talk and tell them what I would like the ball to do, they watch me thorw a few and then suggest a drill.
--------------------
take my wife but leave the bowling gear
Title: Re: help with arsenal
Post by: jcardzcollects on April 20, 2007, 10:44:40 PM
I will try and get some pics as I am sure this will hep you help me. But 2 of my balls are in the proshop getting chips repaired from loose screws?? in the back during league that caused some surface chips and I wont have them back until tomorrow. The I will take pics and email them for anyone who can help. Thanks  to   all
--------------------
take my wife but leave the bowling gear