BallReviews

Equipment Boards => Lane #1 => Topic started by: Cranking_Inferno on January 15, 2006, 07:15:34 AM

Title: Its not Lane#1 .,. its the friction on oil..
Post by: Cranking_Inferno on January 15, 2006, 07:15:34 AM
No matter what "Loch"man did on tour, it comes down to this.  They put a fat shot out, one with lots of oil and the EU, though particle, could not make enough friction to set up and drive properly, nor manage the carry down.

On most heavy oil shots the Super Carbide Bown delivers realtivly well, due to its early read, early set up and delieverance due to its core's stored energy.  However, I have both the Super Carbide Bomb and the EPX.. and the EPX will set up and finish on ANY heavy flooded carry down pattern, no matter what... Reason is this, the EPX epoxy shell creates the friction needed to perform, resin doesn't always perform as well, even with a 3% blend of particle.  the EPX always performs on any heavy oil pattern. Period

Though this new technology had a shakey start, with a few cracks and blems, I would never roll any other ball on a heavy oil pattern than the EPX-T1 period...

Any epoxy shell that hits the market by Columbia is worth its weight in gold.

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: 230-n-up-or-bust on January 15, 2006, 03:17:03 PM
omg...
--------------------
Pain is weakness leaving the body.

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: a_ak57 on January 15, 2006, 03:19:31 PM
LOL, you were just *looking* for an excuse to talk about the EPX again weren't you?....
--------------------
- Andy
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: ImaRedbird on January 15, 2006, 03:21:32 PM
If memory serves me correct. The oil was not heavy on the lanes. The oil was breaking down VERY FAST, and it was in strips so it was mostly DRY which is why if u noticed Mike kept moving in more deep. The EU was just played wrong and he should moved in, and kept the ball in oil so i would have made it back to the pocket. He did what he could I  give loch props cuz i can't make it on tv and i say get em next time. btw not all ballz work on the condition and after the 2nd or 3rd he shoulda made a ball switch.
--------------------
Stop Crying, Shut Up and BOWL!!! Everybody throws  gutterballs back to back at one point in their life Getting Zero is an accomplishent that you should be proud of!!!
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: scotts33 on January 15, 2006, 03:38:14 PM
You're kidding.....right????  Sheesh what 15 yr. old is this now?
--------------------
Scott

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: 230-n-up-or-bust on January 15, 2006, 05:47:25 PM
I think he receives a penny from Columbia each time he uses the words, "epoxy" and "EPX T1" in the same topic.
--------------------
Pain is weakness leaving the body.

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: killswitch66 on January 15, 2006, 05:49:55 PM
dude please stop talkin bout the epx, no one can get over 100 games without the thing cracking
--------------------
Ebonite
Prime Time

Lane #1
Uranium Pearl
Tsunami


VIVA LA METAL MILITIA!


\m/

member of the FOS, LANE 1 OWNS
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: scotts33 on January 15, 2006, 05:50:21 PM
I believe the ONLY time it's been on TV all year was when Kenny Muscato used one at The Masters.
--------------------
Scott

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: Steven on January 15, 2006, 07:32:44 PM
Crackhead_Inferno: Give it a rest; Lochman's problem was execution -- not the Enriched Uranium.

Take your love feast with Epoxy back over the the Columbia forum. You're barking in the section for recruiting members to your lost cause.
--------------------
"Sometimes, the best move is the one we don't make"
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: Saw Mill on January 15, 2006, 08:05:04 PM
CI,

Go read my post on your thread about beating SCB hands down.  I still stand behind the SCB and my post, and will match my SCB up against your EPT oe whatever alphabet ball columbia makes.  Anyone that knows Lane 1 will know that IF, and I said it in capital letters because it is a big IF, it were to beat the SCB, it would not be hands down or pins down in size.

DAVE
--------------------
Romans 1:15&16; "So much as is in me, I am ready to preach the gospel to you to you that are at Rome also.  For I am not ashamed of the gospel of Christ; for it is the power of God unto salvation, to everyone that believeth; to the Jew first, and also to Greek!

F.O.S. Members, Our Assignment Should We Choose To Accept It,  Polish and Sharpen Up Our Saws; Pins Have Been Spotted, and We Are To Saw 'Em Up!!

Bomb Squad Certified and Licensed Diamond Cutter
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: _Stroker_Walter_ on January 15, 2006, 08:23:29 PM
I know a pro shop owner who won't sell the EPX and refuses to stock it anymore.
--------------------
______________________________________________
Currently for sale:
X-Factor Vertigo 16lbs, one drill, <50 games.
Triple X-Factor 16lbs, one drill, <50 games
Columbia Wild 16lbs, one drill, <30 games

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: Cranking_Inferno on January 16, 2006, 12:52:58 AM
I have over 200 hundred games with my EPX and the hot bath treatment is all it needs... best ball ever made.

Who cares if the launch of this new ball had a few blems... mines fine...

When the excalibur, the first reative came out, there were plenty of them craking too...

Dont be so close minded.
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: Spider Ball Bowler on January 16, 2006, 01:03:20 AM
Psssst....the EPX is the worst ball ever made.

I have thrown mine for 5 games and it cracked.

Psssst.....also it wouldn't hook on medium oil lanes and it hooked even less on the heavy oiled lanes....psssst....Columbia300 told me it needed lots of oil to perform....these guys must really crank the crud out of the EPX to make it hook...it's a $250 spare ball.

My opinion..ignore as needed.
--------------------
The 7 Pin is my NEMESIS

Ultimate Inferno, the only ball I like
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: Cranking_Inferno on January 16, 2006, 01:22:03 AM
Like I said.. a new technology may have a few blems... But when it comes to scoring..

8 weeks on a 40 foot heavy oil shot in league...    Average 238

Most of the people can't even get there balls to finish on it.. and the ones that try my line just sail through the flood into the 3 pin.

I tried Ultimate Inferno.. Super Carbide Bomb and EPX.

EPX smoked em all....

Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: killswitch66 on January 16, 2006, 10:15:21 AM
yeah they epx is a piece of trash, my friend has one and it cracked after 10 games, and he almost never uses it now. he uses a hammer 3d offset and its kills the epx. i also saw a guy throw an epx right after he got it, after three frames, guess wat, it cracked! and the guy who runs my local proshop says he hates them, he has something like 5 epxs to fix. and as of movement, that thing does not move in heavy oil unless u use A LOT of hand
--------------------
Ebonite
Prime Time

Lane #1
Uranium Pearl
Tsunami


VIVA LA METAL MILITIA!


\m/

member of the FOS, LANE 1 OWNS
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: Cranking_Inferno on January 16, 2006, 01:16:44 PM
Well... I am not creating this to make Lane#1 fans get mad... I got a few Lane#1 balls coming.. I like Brunswick and columbia equally.  

But here is the $100,000 question.... When you bowl a long oil pattern that usually has lots of carry down.. Don't you want to throw the ball that gives you the best chance to score?

The answer is yes.. and I thought the ball in my arsenal that would give me that was the Super Carbide Bomb... But it labored heavily.. while the EPX absolutly dominated this pattern, scoring a 762 last night out.

I am just a believer in performance, and scoring well.... The company is just a small part.  

This new Epoxy technology has a few cracked balls.... The paradigm's shell has been cracking on a lot of people lately, but no one is gonna stop throwing Storm..

It all comes down to X's and O's..... WHEN I THROW MY EPX ON OIL, I SCORE SCORE SCORE ALL NIGHT LONG.... all I can say is what a ball.....
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: T-GOD on January 16, 2006, 01:26:59 PM
CI, hey, if the EPX is working for you, that's great, by all means use it. It just seems like you're in the minority here on this issue, and it's a small minority too.

I'll bet all you need to do is sand the Super Bomb. =:^D
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: LuckyLefty on January 16, 2006, 01:29:11 PM
I'm sure a surface change and area played change with the EU could have worked....but you only get 12 shots...he just didn't find it!

REgards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Title: Re: Its not Lane#1 .,. its the friction on oil..
Post by: scotts33 on January 16, 2006, 02:07:27 PM
quote:
But here is the $100,000 question.... When you bowl a long oil pattern that usually has lots of carry down.. Don't you want to throw the ball that gives you the best chance to score?


The 90's strips pattern put down for last weekends PBA tourney is NOT a high volume long pattern.  Better re-watch the show CI.  Try longish light volume with inconsistent heads/strips of oil with an OB.  

I'll wager to say that the EPX would have even sucked worse than Loschetter's choice of the EU plus his ball surface/layout didn't match up.
--------------------
Scott