Author Topic: ball spinner (Read 2299 times)

AK47 · « **on:** March 22, 2008, 08:47:54 AM »

can anyone tell where can i get the best deal for a ball spinner? And is it necessary to have the kind with 2 speeds? thanks.
--------------------
Representin' Lane 1 in the Dirty South!
AK47 (Mississippi)
Unofficial member of F.O.S.

joebokie · « **Reply #1 on:** March 22, 2008, 05:06:32 PM »

I have had my Vertex 1/2 HP spinner about a month. It is perfect for a personal model. It sands and polishes well. Buddies Pro Shop at 229.95 shipped is the best I could find. It comes with great instructions. You will be changing the surface of your arsenal right away.

novawagonmaster · « **Reply #2 on:** March 22, 2008, 05:18:38 PM »

I second the above.
Mine works great.
--------------------
Jon (in Ohio)
aka: Rico Swerve~

AK47 · « **Reply #3 on:** March 22, 2008, 05:41:08 PM »

thanks guys, anyone out there who uses donkee brand?
--------------------
Representin' Lane 1 in the Dirty South!
AK47 (Mississippi)
Unofficial member of F.O.S.

shelley · « **Reply #4 on:** March 22, 2008, 05:52:25 PM »

1/2HP Vertex from Buddies for $230 shipped is about the best deal going right now. Not many show up used, so it's tough to save money on a used one. For personal use, it's a fine machine, you don't need two speeds.

SH

TTforshort · « **Reply #5 on:** March 22, 2008, 06:05:28 PM »

quote:
thanks guys, anyone out there who uses donkee brand?
--------------------
Representin' Lane 1 in the Dirty South!
AK47 (Mississippi)
Unofficial member of F.O.S.

SHHHH, you might wake Brandon. Take the advise you have been given, the Vertex is one of the best personal spinners available.

TT
--------------------
"Following the course of least resistance makes for crooked rivers and crooked men."

Steven · « **Reply #6 on:** March 22, 2008, 07:42:21 PM »

quote:
thanks guys, anyone out there who uses donkee brand?

Yea, I use the Donkee 3/4 HP, 2-speed model. I've had it for about 4 years. Despite all the abuse Donkee spinners take on these boards, I like mine. I have it secure on my workbench, and the minimal viration has not been an issue.

quote:
1/2HP Vertex from Buddies for $230 shipped is about the best deal going right now. Not many show up used, so it's tough to save money on a used one. For personal use, it's a fine machine, you don't need two speeds.

The Vertex spinners have a very good reputation, but whatever you get, make sure it's a 2-speed model. The higher speed is really a benefit when burning in polish and for generating heat during regular cleaning. If you settle for a 1-speed, you're short changing your purchase.
--------------------
"Sometimes, the best move is the one we don't make"

novawagonmaster · « **Reply #7 on:** March 23, 2008, 09:18:27 AM »

quote:

The Vertex spinners have a very good reputation, but whatever you get, make sure it's a 2-speed model. The higher speed is really a benefit when burning in polish and for generating heat during regular cleaning. If you settle for a 1-speed, you're short changing your purchase.
--------------------
"Sometimes, the best move is the one we don't make"

I have the single speed 1/2hp Vertex, and I can get the ball/polish hot enough where it burns my hands. I don't think you need more heat than that.
--------------------
Jon (in Ohio)
aka: Rico Swerve~

Brickguy221 · « **Reply #8 on:** March 23, 2008, 11:44:01 AM »

I've had my 1/2 HP Vertex for 5 years and have had no problems with it. You don't have to bolt the Vertex down as it won't jump off the bench, table, etc. like a Donkey does unless you bolt the Donkey down as Steven mentioned.
--------------------
"Whenever I feel the urge to exercise I lie down until the feeling passes away."

Brick

Steven · « **Reply #9 on:** March 23, 2008, 11:49:46 AM »

quote:
I have the single speed 1/2hp Vertex, and I can get the ball/polish hot enough where it burns my hands. I don't think you need more heat than that.

Of course you can get by with one speed. At the shop, I'll occationally use the 1-speed for convenience and it works fine. But if you think about it, the optimal speed for sanding is less than the optimal for polishing/cleaning. So for your primary spinner, why compromise and settle for less?

I used to haul lumber in my Toyota Tercel, but it was a whole lot more efficient (and less painful) when I got a truck.
--------------------
"Sometimes, the best move is the one we don't make"

Edited on 3/23/2008 12:00 PM

AK47 · « **Reply #10 on:** March 23, 2008, 02:36:53 PM »

thanks guys i appreciate the advice.
--------------------
Representin' Lane 1 in the Dirty South!
AK47 (Mississippi)
Unofficial member of F.O.S.

Sir Bowl-A-Lot · « **Reply #11 on:** March 24, 2008, 09:30:14 PM »

Innovative offers the best spinners hands-down.

BeansProShop · « **Reply #12 on:** March 24, 2008, 09:49:25 PM »

If you want to spend the cash...

The Innovative 2-Speed is a commercial grade spinner. $550+shipping I think.

I have mine in a moderate traffic shop for 10 years and I had to replace the rubber ring on the bowl once...

Worth the money..

beans
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Lane#1 Ball Drilling Expert
Thanks for reading and be sure to check us out at the Lane#1 booth in Albuquerque. Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah
Official Pro Shop of "ALL" F.O.S. Members!!!

Author Topic: ball spinner (Read 2299 times)

AK47

ball spinner

joebokie

Re: ball spinner

novawagonmaster

Re: ball spinner

AK47

Re: ball spinner

shelley

Re: ball spinner

TTforshort

Re: ball spinner

Steven

Re: ball spinner

novawagonmaster

Re: ball spinner

Brickguy221

Re: ball spinner

Steven

Re: ball spinner

AK47

Re: ball spinner

Sir Bowl-A-Lot

Re: ball spinner

BeansProShop

Re: ball spinner