BallReviews

Equipment Boards => Lane #1 => Topic started by: sportsdruggie on June 28, 2010, 12:14:22 PM

Title: OUT OF BOX FINISH
Post by: sportsdruggie on June 28, 2010, 12:14:22 PM
where can we find the out of box finish for lane 1 balls? When i go on to the lane 1 website, most of the time they just say..highly polished, but it doesnt tell me the grit or anything like that.
Title: Re: OUT OF BOX FINISH
Post by: zeusjr on June 28, 2010, 08:34:41 PM
They didn't post those details in the past.

Which balls are you looking for?
--------------------
My bowling site: http://home.comcast.net/~BandRBowling  
My eBay site: http://shop.ebay.com/merchant/zeusjr73
Title: Re: OUT OF BOX FINISH
Post by: sportsdruggie on June 28, 2010, 08:37:17 PM

gforce evo
scb
pearl cherry bomb
uranium pearl
tsunami h20
enriched uranium
blueberry
cobalt bomb pearl
Title: Re: OUT OF BOX FINISH
Post by: Strider on June 29, 2010, 04:54:13 AM
For the Brunswick poured balls (Pearl Cherry Bomb, Uranium Pearl, Tsunami H2O, Enriched Uranium, Blueberry, Cobalt Bomb Pearl), if they were matte, they were probably 220 grit + rough buff.  If they were shiny, they were 400 grit + high gloss polish.  The SCB was probably 400 grit sanded.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive (http://"http://www.bowl4fun.com/ron/roncarchive.htm")
Title: Re: OUT OF BOX FINISH
Post by: mrfox101 on June 30, 2010, 03:28:35 AM
PCB was actually a 1200 grit finish with polish.
I use a 1000 Abralon + polish and get a great read/reaction out of mine.
I''ve complained several times about the lack of info on older stuff on the Lane #1 site...but I have never seen anybody fix the site. I''ve had better luck just calling or e-mailing Lane #1. They''ve always answered my questions.
--------------------
Just a few Saws...
& a couple Hammers

Edited on 6/30/2010 3:30 AM
Title: Re: OUT OF BOX FINISH
Post by: Strider on June 30, 2010, 04:45:21 AM
What in the world do you use to get to 1200 grit?  Some odd Scotch Brite?  Everything else I've seen is either 1000 or 1500 grit.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive (http://"http://www.bowl4fun.com/ron/roncarchive.htm")
Title: Re: OUT OF BOX FINISH
Post by: T C 300 on June 30, 2010, 05:47:42 AM
i thought this was the best keep secret about lane1 stuff...??!!   HEHEHE
Title: Re: OUT OF BOX FINISH
Post by: Doug Sterner on July 01, 2010, 11:35:59 PM
Strider...remember the pearl carbide bomb was a particle and Brunswick was using TriZact to finish their particle balls. I think the white Trizact pad was something like 1200 grit.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
For Real Time Interactive Bowling Conversation:
BowlingChat.net (http://"http://www.bowlingchat.net")
Title: Re: OUT OF BOX FINISH
Post by: Strider on July 02, 2010, 04:52:21 AM
Thanks for the info Doug.  I wasn't doubting him, but hadn't heard of it either.  I forgot about the older stuff being Trizact.  The SCB might have been finished with a rougher Trizact pad as well.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive (http://"http://www.bowl4fun.com/ron/roncarchive.htm")
Title: Re: OUT OF BOX FINISH
Post by: charlest on July 02, 2010, 06:53:28 AM
quote:
What in the world do you use to get to 1200 grit?  Some odd Scotch Brite?  Everything else I''ve seen is either 1000 or 1500 grit.
--------------------
Penn State Proud

Ron Clifton''s Bowling Tip Archive (http://"http://www.bowl4fun.com/ron/roncarchive.htm")


Strider,

Remember back in the days the Pearl Cherry Bomb, people weren''t using Abralon. 1200 grit was probably the US/CAMI rating. In terms of Abralon, that''s a little finer than P2000 grit and closer to P2500 grit.

Though I doubt Lane#1 used it, Track had a compound called Clean and Smooth. It theoretically finished balls to 1200 grit.
--------------------
"None are so blind as those who will not see."

Edited on 7/2/2010 6:55 AM
Title: Re: OUT OF BOX FINISH
Post by: charlest on July 02, 2010, 06:54:31 AM
quote:
Strider...remember the pearl carbide bomb was a particle and Brunswick was using TriZact to finish their particle balls. I think the white Trizact pad was something like 1200 grit.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
For Real Time Interactive Bowling Conversation:
BowlingChat.net (http://"http://www.bowlingchat.net")


Doug,

White Trizact is around P6000 - P8000 grit. That's a lot finer than a P4000 grit Abralon pad.
--------------------
"None are so blind as those who will not see."
Title: Re: OUT OF BOX FINISH
Post by: Doug Sterner on July 02, 2010, 08:49:15 PM
Sorry charlest...guess I had the color wrong.

As a side note I have found a source for 800 and 1500 grit Siaair pads. I am going to order a bunch of pads at some point within the next month or so. Anyone interested drop me a PM.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
For Real Time Interactive Bowling Conversation:
BowlingChat.net (http://"http://www.bowlingchat.net")