BallReviews

Equipment Boards => Lane #1 => Topic started by: triggerman on February 03, 2009, 03:16:43 AM

Title: punching a dynamo tonight, looking for input
Post by: triggerman on February 03, 2009, 03:16:43 AM
ok so I have made up my mind on drilling this new ball, I purposefully ordered a short pin (1-2" pin) and low top weight (2.8) ball.  My intial intend is a semi pin axis drilling

a little history on my semi pin, is I have a tsunmami 2.75 pin low top, we moved the pin so it was 2.375 directly above my pap, kicked cg left 1/2" thus moving the Mb back towards my thumb, put a huge hole on the PAP and then polished the ball

I can take the tsu and throw it hard and fast down 10 no over reaction and it kills the hole, on the fresh doing a 10-5 type shot on our 41 ft house shot, it just doesnt get back enough

with that said, I am going to do the same to the dynamo, looking for a stronger move off the dry on the back, where the tsu wont recover I want the dynamo to.  I think if I polish it I can get the push up front but still retain enough pop on the back to give me a big backend move

discuss:  pros, cons?  open to hear what you all have to say prior to me punching this evening

on edit:  I know this is an early reving early rolling drilling, what I see out of my tsu is an early strong rev, but not necessarily an early roll it gets great length for such an early rolling drilling, and still has plenty of pop on the back

Is my thinking wrong, can I expect similar results?
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby
Title: Re: punching a dynamo tonight, looking for input
Post by: CoachLefty on February 03, 2009, 11:28:51 AM
Punching bowling balls leads to broken hands and fingers.

There you have my input and are welcome.
--------------------
Go Balls Deep

Lefty

Title: Re: punching a dynamo tonight, looking for input
Post by: triggerman on February 03, 2009, 11:32:06 AM
I shall keep that advice close to me at all times coach
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby
Title: Re: punching a dynamo tonight, looking for input
Post by: Roy Munson on February 03, 2009, 12:46:50 PM
. . . ah ha ha haha
. . . hi hihi
. . . err
. . . *cricket*  *cricket*  *cricket*  
--------------------
=========================================

Current Arsenal:
...Pearl Cherry Bomb
...Pearl Cherry C2
...Pearl Cobalt Bomb
...Tsunami
...Pearl H2O
...Pearl Emerald
...Pink Raspberry
...Pearl XXL
...XXXL
...Pearl Viper
...NIB Pink Raspberry
...NIB XXL
Title: Re: punching a dynamo tonight, looking for input
Post by: beachcomberjones on February 03, 2009, 08:00:44 PM
i dont see it recovering soon enough on the 41ft, maybe try without polish first. also  watch the top weight, it goes away fast zeusy says
--------------------
****Looking for 14lbs Buzzsaws*****
~~~~Looking for 14lbs Golden Nugget~~~~
Title: Re: punching a dynamo tonight, looking for input
Post by: zeusjr on February 03, 2009, 08:13:04 PM
quote:
i dont see it recovering soon enough on the 41ft, maybe try without polish first. also  watch the top weight, it goes away fast zeusy says


I don't want to be misquoted here.  It's my opinion that it's not that when you drill it it drops out faster then normal but the angle of the block that changes it quickly.  This has to do with the curve of the top of the block IMO.

Conversely it's easy to put back with a low X-Hole.

Or just become a lefty..  LOL
--------------------
My bowling site: http://home.comcast.net/~zeusjr73/ Newly Updated  
My eBay site: http://search.ebay.com/_W0QQsassZzeusjr73
Title: Re: punching a dynamo tonight, looking for input
Post by: triggerman on February 03, 2009, 08:37:14 PM
i ended up drilling it almost exactly like my AO, the pin was longer then i wanted, it ended up being 2.5"  so i said screw it and punch it like the AO., both balls at 4k abralon, the AO started with about .75 more top wieght, but the dynamo was 5-7 boards stonger.  on a normal house shot type line say like 15-8 which is really my comfort zone they look almost identical, the real proof is when i move the ball outside, stnading 25 with the left foot, targeting 10 at the arrows and shooting for  the 4 board at about the 40 ft mark, the AO faces the 3 pin while the dynamo makes the hole easy the shallower i play outside the better the dynamo looked in comparision to the AO. in deep I feel the AO had the advantage on this lane due to the energy retention of the pearl, on the longer oil i shoot on mondays and thursday  the dynamo will have the upper hand.

on a side not zeus, my cg was spot on.  Ive noticed some saying their cg was off by big amounts, mine like i said was spot on
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby
Title: Re: punching a dynamo tonight, looking for input
Post by: triggerman on February 03, 2009, 08:53:46 PM
i had one on  my tester and was told it was ok, had one on my AO as well, neve any issues (looks like a filled in pin doesnt it?)  not to worry,
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby
Title: Re: punching a dynamo tonight, looking for input
Post by: zeusjr on February 03, 2009, 08:57:34 PM
quote:
on a side note zeus, my cg was spot on.  Ive noticed some saying their cg was off by big amounts, mine like i said was spot on


It just so happened the one I took for myself was way off, the box said 4.5oz but it was more like 1.5oz.  But I checked another one I have and it was on the money.  It happens from time to time, I wouldn't be to concerned with it.

--------------------
My bowling site: http://home.comcast.net/~zeusjr73/ Newly Updated  
My eBay site: http://search.ebay.com/_W0QQsassZzeusjr73
Title: Re: punching a dynamo tonight, looking for input
Post by: beachcomberjones on February 04, 2009, 12:48:43 AM
quote:
I don't want to be misquoted here. It's my opinion that it's not that when you drill it it drops out faster then normal but the angle of the block that changes it quickly. This has to do with the curve of the top of the block IMO.



Thats what i ment LOL in so many different ways!
--------------------
****Looking for 14lbs Buzzsaws*****
~~~~Looking for 14lbs Golden Nugget~~~~