Author Topic: Sure Strike coverstock adjustments ??? (Read 1796 times)

Laybzz74 · « **on:** December 18, 2008, 12:55:19 PM »

Looking for input from other roomies that have adjusted the SS cover to a surface that they have had success with ...

Anyone

Thanx in advance !!!
--------------------
**** Official "L/LM" ball "junkie" ****
15 balls ... and counting !!!

http://www.lanemastersbowling.com/index.html

Man, I LOVE this game !!! And I love it even more ... now that I''m using LEGENDS and LaneMasters equipment !!!
"Master the Lanes with Legendary hitting power" !!!

Robb in O''Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

charlest · « **Reply #1 on:** December 18, 2008, 10:21:07 PM »

Funny you should raise that question, Robb. It's one of the next set of items on my own agenda. I wanted to "mild" the ball down a bit, because it hooks so darned much, even with the length drilling I put on mine. I'm not sure if I'm going to sand it to 4000 Abralon and polish it or just dose it with Delayed Reaction. The stock surface, 800 grit (US) + polish, just hooks too much.

--------------------
"None are so blind as those who will not see."

Laybzz74 · « **Reply #2 on:** December 19, 2008, 08:10:45 AM »

Thanx, Jeff ... I have STORM Step 3 on mine, and still looking for something that I can trust after my BP and BPR are too strong.

Anyone else

--------------------
**** Official "L/LM" ball "junkie" ****
15 balls ... and counting !!!

http://www.lanemastersbowling.com/index.html

Man, I LOVE this game !!! And I love it even more ... now that I'm using LEGENDS and LaneMasters equipment !!!
"Master the Lanes with Legendary hitting power" !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

charlest · « **Reply #3 on:** December 19, 2008, 02:52:52 PM »

Robb,

The problem with Step 3 is, in my eyes, it's an abrasive compound and you might not know exactly where you've taken the ball. While I like Storm's polishes a lot, when I am experimenting, as with this ball, I'd like to know where I am, in case I need/want to go up or down from there.
(But, then, that's just my little twisted bit of "heaven".)
--------------------
"None are so blind as those who will not see."

Laybzz74 · « **Reply #4 on:** December 20, 2008, 01:30:07 PM »

Understand ... wanted to try something different, and since I normally stick to Legends products, this was a "shot in the dark". Not happy with it yet ... maybe 4K abralon and polished

--------------------
**** Official "L/LM" ball "junkie" ****
2 many balls !!!

http://www.lanemastersbowling.com/index.html

"Master the Lanes with Legendary hitting power" !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

charlest · « **Reply #5 on:** December 20, 2008, 02:34:53 PM »

quote:
Understand ... wanted to try something different, and since I normally stick to Legends products, this was a "shot in the dark". Not happy with it yet ... maybe 4K abralon and polished
--------------------
**** Official "L/LM" ball "junkie" ****
2 many balls !!!

http://www.lanemastersbowling.com/index.html

"Master the Lanes with Legendary hitting power" !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

Depends on Drilling. SS is "barely" a ball for lighter oils. I have mone pin above the center of the bridge and CG slightly kicked out from grip center and it still hooks a TON on medium light oil.

Although this ball is for lots of length and with a strong backend ( I htink it actually competes with balls like the Virtual Gravity and the Rapid Fire Pearl), it does notlike light oil (unless you have LOTS of ball speed or lower revs).

Lanemasters staff spent lots of time developing this beauty especially due to its use of filler between core and coverstock. They tested many fillers to insure they maintained the Coefficient of Restitution of the solid coverstock (no filler) Lanemasters balls. Indeed, I think they exceeded the hitting power of several of the solid coverstock balls with the Sure Strike.

Amazing Ball!
--------------------
"None are so blind as those who will not see."

Laybzz74 · « **Reply #6 on:** December 20, 2008, 02:53:57 PM »

Mine is pin above ring, and 4 x 3 layout with a small WH ...
--------------------
**** Official "L/LM" ball "junkie" ****
2 many balls !!!

http://www.lanemastersbowling.com/index.html

"Master the Lanes with Legendary hitting power" !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

charlest · « **Reply #7 on:** December 20, 2008, 03:36:36 PM »

quote:
Mine is pin above ring, and 4 x 3 layout with a small WH ...
--------------------
**** Official "L/LM" ball "junkie" ****
2 many balls !!!

http://www.lanemastersbowling.com/index.html

"Master the Lanes with Legendary hitting power" !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

That thing must hook about 35 boards on medium oil. That is one STRONG drilling for the SS. Small wonder you want to change the surface. Try 4000 grit Abralon + polish. Then, if that doesn't work, add Delayed Reaction.
--------------------
"None are so blind as those who will not see."

Laybzz74 · « **Reply #8 on:** December 21, 2008, 05:31:03 PM »

Thanx, Jeff ... I'll let ya know how things work out.
--------------------
**** Official "L/LM" ball "junkie" ****
2 many balls !!!

http://www.lanemastersbowling.com/index.html

"Master the Lanes with Legendary hitting power" !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email and PayPal addy)

Author Topic: Sure Strike coverstock adjustments ??? (Read 1796 times)

Laybzz74

Sure Strike coverstock adjustments ???

charlest

Re: Sure Strike coverstock adjustments ???

Laybzz74

Re: Sure Strike coverstock adjustments ???

charlest

Re: Sure Strike coverstock adjustments ???

Laybzz74

Re: Sure Strike coverstock adjustments ???

charlest

Re: Sure Strike coverstock adjustments ???

Laybzz74

Re: Sure Strike coverstock adjustments ???

charlest

Re: Sure Strike coverstock adjustments ???

Laybzz74

Re: Sure Strike coverstock adjustments ???