Author Topic: 50/50 simple green cleaning (Read 6165 times)

blackburn1436 · « **on:** January 22, 2009, 03:08:50 AM »

Whats the mixture I have seen some talk about and what is the procedure to cleaning. I have a cell pearl that I've thrown for about a month and would really like to maintain it. Thanks
--------------------
LETS GOOOOO MOUNTAINEERS!!!!!!!!!!!!!!!

J_w73 · « **Reply #16 on:** January 22, 2009, 01:45:33 PM »

quote:
quote:
quote:
I mix in a windex bottle,1 part S.G. 1 part H2o and a 10% acetone.in another bottle I have H2o to rinse the ball after cleaning with the S.G.
--------------------
The harder I try the harder they fall

Don't use acetone is will soften the cover and can lead to ball death, not to mention it's illegal.

Yeah right. what's this ball death I keep hearing about? 15 years of bowling I have not yet experienced this "ball death".
I've also used ABC approved cleaner that would melt the rubber gloves I was using. 10% acetone won't do any harm IMO.but you can skip the acetone if you want.
--------------------
The harder I try the harder they fall

I somewhat agree.. acetone.. yes is illegal.. but have you seen what the ebonite powerhouse cleaner does to the plastic cap. It melts it into a blob.
I wonder what it does to the pores of a bowling ball? I feel the USBC gets alot of pressure from manufactures to stay out of their way in making money. Seems their criteria for passing certain products may not be that strong.
Not to start a conspiracy theory.. but "hey lets sell a cleaner and tell everyone they must use it to keep their ball clean but it will slowly close the pores and in about 6 to 8 months they will have to get a new ball because their ball is a marble now."
--------------------
16-17 mph
350-475 rpm
PAP 5 1/2 x 3/8 up
High Game 300 x 3
High Series 782
Book Average 215 / 205
PBA Xperience ave 180
years bowling 22

ucumin2 · « **Reply #17 on:** January 22, 2009, 05:49:45 PM »

Has anyone actually seen damage from using acetone? Only reason its illegal is because its extremely flammable. U myself have not found anything that cleans my ball better. Tryed most cleaners out there with no success. Still leaves belt marks and lane marks.

robospare · « **Reply #18 on:** January 22, 2009, 06:02:03 PM »

simple green will leave a soap film on your ball.
I use a equal mix of alcohol,clear ammonia, and clear vinegar.
Takes off the oil, dirt, and belt marks and leaves no film on your ball.

J_w73 · « **Reply #19 on:** January 22, 2009, 06:21:33 PM »

quote:
Has anyone actually seen damage from using acetone? Only reason its illegal is because its extremely flammable. U myself have not found anything that cleans my ball better. Tryed most cleaners out there with no success. Still leaves belt marks and lane marks.

It is actually illegal because in the days of only plastic balls (maybe rubber too) people would soak the entire ball in a bucket of acetone, MEK, or other solvent and it would make the ball much softer and grip the lane better. Thus the reason for a minimum hardness rating by the USBC.
--------------------
16-17 mph
350-475 rpm
PAP 5 1/2 x 3/8 up
High Game 300 x 3
High Series 782
Book Average 215 / 205
PBA Xperience ave 180
years bowling 22

Edited on 1/22/2009 7:23 PM

J_w73 · « **Reply #20 on:** January 22, 2009, 06:26:18 PM »

as far as simple green .. I don't trust it. It seems to leave a slick film on the surface. And I know it says non-toxic, biodegradeble but there aren't many cleaners that make me cough and gasp like simple green. Maybe CLR but that stuff IS toxic.
--------------------
16-17 mph
350-475 rpm
PAP 5 1/2 x 3/8 up
High Game 300 x 3
High Series 782
Book Average 215 / 205
PBA Xperience ave 180
years bowling 22

Maine Man · « **Reply #21 on:** January 22, 2009, 08:12:12 PM »

I use this mixture, and it works great:

50% Simple Green

50% Isopropyl Alcohol (90%)

Make sure you use the 90% Isopropyl alcohol and you will get fantastic results. Most of the Isopropyl alcohol sold in stores like Wal-Mart are either 50% or 70%. If you want to find 90%, go to a pharmacy, like Walgreens, they always have some and it's very inexpensive. Good luck!
--------------------
James Goulding
Moores Pro Shop
Bowler 2 Bowler Blog: http://bowler2bowler.wordpress.com
State Site: http://www.msusbc-maine.org
Local Link: www.lausbca.org

six pack · « **Reply #22 on:** January 22, 2009, 11:12:58 PM »

quote:
quote:
quote:
quote:
I mix in a windex bottle,1 part S.G. 1 part H2o and a 10% acetone.in another bottle I have H2o to rinse the ball after cleaning with the S.G.
--------------------
The harder I try the harder they fall

Don't use acetone is will soften the cover and can lead to ball death, not to mention it's illegal.

Yeah right. what's this ball death I keep hearing about? 15 years of bowling I have not yet experienced this "ball death".
I've also used ABC approved cleaner that would melt the rubber gloves I was using. 10% acetone won't do any harm IMO.but you can skip the acetone if you want.
--------------------
The harder I try the harder they fall

Buy a TNV and you'll have one..
--------------------
Keep looking... I'm sure there's a 300 in one of those balls you keep buying!!
(\ /)
( . .)
c(')(') here bunny bunny bunny....

Edited on 1/22/2009 9:11 PM

I didn't carry a few ten pins tonight with my playmaker,must of been that dreaded ball death.
--------------------
The harder I try the harder they fall

Gazoo · « **Reply #23 on:** January 23, 2009, 07:48:35 AM »

quote:
I use this mixture, and it works great:

50% Simple Green

50% Isopropyl Alcohol (90%)

Make sure you use the 90% Isopropyl alcohol and you will get fantastic results. Most of the Isopropyl alcohol sold in stores like Wal-Mart are either 50% or 70%. If you want to find 90%, go to a pharmacy, like Walgreens, they always have some and it's very inexpensive. Good luck!
--------------------

+1 Very effective formula.
--------------------
"I don't want to be remembered, I want to be forgotten"

se7en · « **Reply #24 on:** January 23, 2009, 09:42:45 AM »

I've had a BuzzBomb in out of box condition since I've owned it that has at least a couple hundred games on it. It performs just as good as the day I bought it.

It's not as cut and dry as just using a cleaning mixture.

I use a SG/Alcohol mix to clean my equipment just after I finish bowling before I put my equipment in the bag to leave. Don't wait until you get home and don't do it when you take your equipment out the following outing.

I use Clean and Dull about once a month when I reapply my polish, and finish the process with Docs Magic Elixir to help keep oil from getting in.

Helps to own your own spinner, but it's still easily done with the right products.

At this point, I don't think I could bleed much oil out of my ball, because there wouldn't be much in there.
--------------------
There is nothing so easy to learn as experience and nothing so hard to apply.

whin-o · « **Reply #25 on:** January 23, 2009, 11:02:30 AM »

Isopropyl alcohol is fine for surface cleaning,not for deep cleaning.
The reason being is iso has some paraffin in it.
To get a good deep cleaning carry a spray bottle with a small amount of
dishwashing liquid and water along with a spray bottle of de-natured
alcohol says my proshop owner.

DON DRAPER · « **Reply #26 on:** January 23, 2009, 11:14:46 AM »

i've used simple green to clean bowling balls for over 5 years and have never had any type of problem. i usually mix it half water, half simple green.

Author Topic: 50/50 simple green cleaning (Read 6165 times)

blackburn1436

50/50 simple green cleaning

J_w73

Re: 50/50 simple green cleaning

ucumin2

Re: 50/50 simple green cleaning

robospare

Re: 50/50 simple green cleaning

J_w73

Re: 50/50 simple green cleaning

J_w73

Re: 50/50 simple green cleaning

Maine Man

Re: 50/50 simple green cleaning

six pack

Re: 50/50 simple green cleaning

Gazoo

Re: 50/50 simple green cleaning

se7en

Re: 50/50 simple green cleaning

whin-o

Re: 50/50 simple green cleaning

DON DRAPER

Re: 50/50 simple green cleaning