win a ball from Bowling.com

Author Topic: 6 More balls stripped of approval  (Read 50904 times)

suhoney24

  • Hero Member
  • *****
  • Posts: 579
6 More balls stripped of approval
« on: March 29, 2022, 07:25:21 PM »
USBC and Storm Products have agreed on a national tournament exclusion rule and ball exchange program for six Storm Products manufactured ball models. The agreement comes after USBC identified the models having a percentage of balls produced below USBC minimum 73D hardness specification. Read more: https://bowl.com/News/NewsDetails.aspx?id=23622337509

USBC's investigation showed a percentage of these ball models measured below the USBC-required hardness level of the approval samples submitted by Storm. Storm collaborated with USBC after being notified of this testing.

The affected models include: Storm Phaze 4, Storm Electrify Solid, Storm Trend 2, 900 Global Altered Reality, 900 Global Wolverine, Roto Grip UFO Alert

Effective March 30, 2022, these balls models are prohibited from use in USBC national tournaments, including but not limited to, the USBC Masters, U.S. Open, USBC Open Championships, USBC Women's Championships, all PWBA Tour events, USBC Junior Gold and Youth Open Championships, USBC Intercollegiate Championships, USBC Team USA Trials, USBC Senior Masters and USBC Senior Queens.

These ball models remain USBC approved. Each USBC competition, whether tournament or league, has the option to adopt USBC's national tournament rule prohibiting use of these balls or to continue to allow their use.

USBC has shared this national tournament rule with Storm and has Storm's support. Storm will offer owners of the affected balls the option to exchange their balls for a new product. Information about the exchange program will be published later this week on StormBowling.com.

 

Strider

  • Hero Member
  • *****
  • Posts: 6757
Re: 6 More balls stripped of approval
« Reply #121 on: April 03, 2022, 08:55:26 AM »
Not exactly.  It does explain the curtain and why people aren't allowed to watch.  It doesn't explain anything about how Belmo was approached.   It was supposedly about voluntary checking of urethane equipment, not spot checking of Storm equipment (urethane or reactive).

Someone made a point earlier about the possibility of Storm maybe getting their new resins from a different supplier.  This could make some sense.  Even if a new supplier's product meets their requirements there's lots of little things in the "inactive ingredients" that could possibly cause problems.  We all know how important the curing process is to these balls.  It could be that either the new resins cured slower and spot checking after manufacturing showed everything in spec, or the resins continued to cure longer instead of having a natural stopping point. than the previous material.

psycaz

  • Sr. Member
  • ****
  • Posts: 333
Re: 6 More balls stripped of approval
« Reply #122 on: April 03, 2022, 09:57:15 AM »
At what point does the +/- 2 accuracy get taken into account?

Does anyone know if the numbers the USBC is putting out are from their spot / on site testing at the Masters?

They’re going to call a table behind a curtain a controlled environment and gloss over the +/- 2 variable since they’ve left their hopefully static environment at headquarters for these tests?

acread

  • Jr. Member
  • **
  • Posts: 42
Re: 6 More balls stripped of approval
« Reply #123 on: April 05, 2022, 01:26:06 AM »
My Lord, there are a lot of people that are mad at the USBC for finally doing their job.  It seems pretty simple.  The balls are illegal by the USBC standards of 73D.  Most of them are not illegal using the PBA's 70D standards.  However, to protect SPI, Tom Clark issued a statement with a false equivalency comparing the USBC's data to the PBA's as if they found different results.  They didn't; they just have different thresholds for what constitutes "illegal".

Also, the health of the bowling industry worldwide (and especially the PBA) is currently dependent on Storm's viability, production, and support.  Therefore, they will do what they have to in order to protect Storm's financial well-being so that the industry will not suffer.

In short, the balls are illegal, the timing of the announcement/exclusion was awful and flat-out wrong, the USBC did its job, and the PBA is protecting a major sponsor and hoping that nobody notices their hypocrisy.  Importantly, it's all being done for the greater good of keeping the bowling industry going strong instead of having it potentially fall apart.  Chad Murphy is being used as a scapegoat, which is easy because he legitimately screwed up the timing of the announcement/enforcement of the ban/exclusion.  However, Tom Clark's statement is infinitely more shady and bullcrap than anything Chad Murphy has done, but he had to do it to protect a huge sponsor.
« Last Edit: April 05, 2022, 01:31:42 AM by acread »
Yeah, well, you know, that’s just, like, your opinion, man.

bowling4burgers

  • Full Member
  • ***
  • Posts: 188
Re: 6 More balls stripped of approval
« Reply #124 on: April 05, 2022, 06:25:56 AM »
tl;dr: Storm too big to fail.
The Future of Bowling: Bowling is a once-popular tavern game played with a heavy ball and ten pins.

acread

  • Jr. Member
  • **
  • Posts: 42
Re: 6 More balls stripped of approval
« Reply #125 on: April 05, 2022, 07:37:23 AM »
Go tell that to EBI.
Yeah, well, you know, that’s just, like, your opinion, man.

psycaz

  • Sr. Member
  • ****
  • Posts: 333
Re: 6 More balls stripped of approval
« Reply #126 on: April 05, 2022, 07:57:41 AM »
My Lord, there are a lot of people that are mad at the USBC for finally doing their job.  It seems pretty simple.  The balls are illegal by the USBC standards of 73D.  Most of them are not illegal using the PBA's 70D standards.  However, to protect SPI, Tom Clark issued a statement with a false equivalency comparing the USBC's data to the PBA's as if they found different results.  They didn't; they just have different thresholds for what constitutes "illegal".

Also, the health of the bowling industry worldwide (and especially the PBA) is currently dependent on Storm's viability, production, and support.  Therefore, they will do what they have to in order to protect Storm's financial well-being so that the industry will not suffer.

In short, the balls are illegal, the timing of the announcement/exclusion was awful and flat-out wrong, the USBC did its job, and the PBA is protecting a major sponsor and hoping that nobody notices their hypocrisy.  Importantly, it's all being done for the greater good of keeping the bowling industry going strong instead of having it potentially fall apart.  Chad Murphy is being used as a scapegoat, which is easy because he legitimately screwed up the timing of the announcement/enforcement of the ban/exclusion.  However, Tom Clark's statement is infinitely more shady and bullcrap than anything Chad Murphy has done, but he had to do it to protect a huge sponsor.

USBC finally doing their jobs?

They’re the ones who created this crapfest with the timing of their decision as well as the decisiveness as a topper.

You agree the timing is horrible.

Thoughts on the USBC totally abdicating their responsibility on making a decision on the balls for all bowlers? Leaving it to local associations and tournaments was stupid.

If they wanted to keep them legal for use outside of those exclusion tournaments, them make the executive decision and be done with it. Be the governing body and provide leadership and certainty for your membership as to what’s going to happen with those balls come the start of fall 2022 season.

All they did was kick the responsibility to someone else. Allow folks to blame someone else for a decision. Decisions that will not be made until after Storm’s exchange window closes on the affected bowling balls. Well after.

A total crapfest if and/or when those balls start being banned for local use for the Fall 2022 season and bowlers are stuck with $150+ door stops because of no exchange option.

acread

  • Jr. Member
  • **
  • Posts: 42
Re: 6 More balls stripped of approval
« Reply #127 on: April 05, 2022, 09:12:13 AM »
USBC finally doing their jobs?

They’re the ones who created this crapfest with the timing of their decision as well as the decisiveness as a topper.

You agree the timing is horrible.

Thoughts on the USBC totally abdicating their responsibility on making a decision on the balls for all bowlers? Leaving it to local associations and tournaments was stupid.

If they wanted to keep them legal for use outside of those exclusion tournaments, them make the executive decision and be done with it. Be the governing body and provide leadership and certainty for your membership as to what’s going to happen with those balls come the start of fall 2022 season.

All they did was kick the responsibility to someone else. Allow folks to blame someone else for a decision. Decisions that will not be made until after Storm’s exchange window closes on the affected bowling balls. Well after.

A total crapfest if and/or when those balls start being banned for local use for the Fall 2022 season and bowlers are stuck with $150+ door stops because of no exchange option.



I 100% agree with all of your points.  That doesn't make any of my points wrong.  You'll also notice I didn't say that USBC did their jobs well.  They didn't, but at least they identified a major problem and attempted to address it.  As you very well explained, they screwed up the way they handled it six ways from Sunday, but at least they're trying to navigate an incredibly delicate situation.  That's better to me than the PBA handling the issue like Kevin Bacon at the end of Animal House and pretending it doesn't exist.
Yeah, well, you know, that’s just, like, your opinion, man.

acread

  • Jr. Member
  • **
  • Posts: 42
Re: 6 More balls stripped of approval
« Reply #128 on: April 05, 2022, 09:16:28 AM »
I should say that I disagree on one point, but only partially.  Storm created the crapfest by putting illegal balls out into the market, not the USBC.  The USBC made it much worse because of all of the things you mentioned, but that's still better than putting their heads in the sand and pretending the original problem doesn't exist.
Yeah, well, you know, that’s just, like, your opinion, man.

acread

  • Jr. Member
  • **
  • Posts: 42
Re: 6 More balls stripped of approval
« Reply #129 on: April 05, 2022, 09:41:31 AM »
On a different note, I will admit that I'm pretty pissed off that I have to spend $75 in shipping and drilling costs (even after the $50 coupon) to downgrade from a ball I loved to another ball that I probably won't like quite as much from a company I'm having a hard time trusting right now.  Many of us are spending a pretty decent chunk of change to make sure that we haven't completely wasted our initial investment, making the replacement balls the most expensive ones we will have ever owned by far.  Thanks a bunch, Storm.
Yeah, well, you know, that’s just, like, your opinion, man.

BeerLeague

  • Sr. Member
  • ****
  • Posts: 426
Re: 6 More balls stripped of approval
« Reply #130 on: April 05, 2022, 10:17:06 AM »
Want to know why bowling is such a mess ... look no further than the USBC.

They tested balls yes ..... BUT THEY DID NOT ADHERE TO THEIR OWN POLICY !!!!

All balls must be sanded to 500 grit before testing -- THEY DIDN'T DO THIS !!!!!!

This ruling has ZERO integrity behind it !  -- It's pathetic that the governing body behind bowling at the national level has less integrity than a condo owners association. 

Who hires these idiots?

avabob

  • Hero Member
  • *****
  • Posts: 2779
Re: 6 More balls stripped of approval
« Reply #131 on: April 05, 2022, 10:30:03 AM »
I would like to see some data on balls of varying hardness.  Specifically what impact does hardness have on coefficient of friction (COF) .  my guess is that it is minimal.  Surface prep has a much bigger impact yet no problem taking a ball down to 360. 

milorafferty

  • Hero Member
  • *****
  • Posts: 11171
  • I have a name, therefore no preferred pronouns.
Re: 6 More balls stripped of approval
« Reply #132 on: April 05, 2022, 11:03:11 AM »
One question that came up for me when I received my replacement balls(for the Spectre). The Phase 4 is R2S Pearl, which is "somewhat" banned. I received a Hy-Road Pearl as a replacement, also R2S Pearl. The inspection date(On the box) for the Hy-Road is 3/22/2022. How can one be legal and not the other when they both use the same cover with the same box finish?

Is it the color? Maybe the scent?
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

itsallaboutme

  • Hero Member
  • *****
  • Posts: 2011
Re: 6 More balls stripped of approval
« Reply #133 on: April 05, 2022, 11:48:40 AM »
Milo-plea deal.  Storm cried uncle so they would stop testing.

3835

  • Hero Member
  • *****
  • Posts: 736
Re: 6 More balls stripped of approval
« Reply #134 on: April 05, 2022, 11:51:24 AM »
2 responses:

1. Avabob - Ron Hickland (Creating the Difference CTD) already did the varying degree of hardness. There is actually a noticable difference. I saw the video on Youtube. Go check it out.

2. Milo - I asked the same question. Answer I got was the Hyroad is probably illegal too (speculation). However, when USBC said we are at 6 balls and counting, my hunch (speculation) is Storm waived the white flag and said stop before we are bankrupt. Imagine how many Hyroads would need replaced (pearl and hybrid original) if found illegal? That is why USBC said there would be no other balls found illegal in the news release (speculation yet again). 

SVstar34

  • Hero Member
  • *****
  • Posts: 5461
Re: 6 More balls stripped of approval
« Reply #135 on: April 05, 2022, 12:32:23 PM »
One question that came up for me when I received my replacement balls(for the Spectre). The Phase 4 is R2S Pearl, which is "somewhat" banned. I received a Hy-Road Pearl as a replacement, also R2S Pearl. The inspection date(On the box) for the Hy-Road is 3/22/2022. How can one be legal and not the other when they both use the same cover with the same box finish?

Is it the color? Maybe the scent?

I think Ron Hickland also mentioned that color can play a difference in hardness