win a ball from Bowling.com
« previous next »
Pages: 1 [2]

Author Topic: New benchmark ball  (Read 13735 times)

Strider

  • Hero Member
  • *****
  • Posts: 6757
New benchmark ball
« on: April 19, 2021, 04:50:37 PM »
Looking for something new to add.  I want something clean through the fronts and a round/smooth back end.  I'd prefer something low RG and symmetrical.  Medium to med/heavy sport type shots.  Stronger/smoother than my Motiv Venom Shock, but less than my Storm Phase II.

What I'm most interested in

Roto Grip Idol Synergy (Seems to like straighter angles from what I've read)
900 Global Zen (Definitely smooth, not sure about overall strength)
Motiv Forge (Don't know much about it, but like Motiv and specs seem to fit)
Logged

 

jimjames

  • Sr. Member
  • ****
  • Posts: 296
Re: New benchmark ball
« Reply #16 on: April 22, 2021, 01:57:48 PM »
Quote from: UpstateProShopChris on April 22, 2021, 01:39:00 PM
The flare potential of thr undrilled ball is best indicated by rhe differential.  In this case the differential is .048 which is of the medium to higher part of the range.  How much flare you wind up with would depend on the drilling chosen.  The drilled differential can go up or down from that number and will determine overall flare potential.
Thank you for this. Still learning after all these years.
Logged

UpstateProShopChris

  • Sr. Member
  • ****
  • Posts: 372
Re: New benchmark ball
« Reply #17 on: April 22, 2021, 02:07:07 PM »
Yes sir you are welcome.  Feel free to PM me if you have any other questions.
Logged
Chris Garrett
Upstate Pro Shop
Greenville, SC  864-248-4737
Upstateproshop@charter.net

Brunswick Regional Staff
Vise Regional Staff

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4350
Re: New benchmark ball
« Reply #18 on: April 22, 2021, 03:22:47 PM »
Quote from: jimjames on April 22, 2021, 01:57:48 PM
Quote from: UpstateProShopChris on April 22, 2021, 01:39:00 PM
The flare potential of thr undrilled ball is best indicated by rhe differential.  In this case the differential is .048 which is of the medium to higher part of the range.  How much flare you wind up with would depend on the drilling chosen.  The drilled differential can go up or down from that number and will determine overall flare potential.
Thank you for this. Still learning after all these years.

Jim,

Basically adding on to Chris' statement,  You take the GB4 with a diff of .048.  With a pin down drilling, that diff after drilling could decrease to .040 and tighten up the flare rings.  But a pin up layout depending on pin to PAP distance could up it to .050 or more and then weight holes could extend that diff number in to the .070 range.  The distance between the flare rings would get farther apart and the flare would essentially go complete around the entire ball.  I believe Mo years ago was able to take a ball and after drilling it was able to get the diff to increase to .100 simply be pin placement and weight hole placement. 

In your case, Jim.  You having lower ball speed and rev rate, if you are on an oily surface, you want some built in flare because you cant use weight holes anymore to help you out.  If you drilled a ball with a diff of .025 -.030, the ball would get down the lane and then not do much because the core doesnt offer you any help.  You solely rely on the cover to obtain any hook potential.  The only way you could use a ball with lower diff numbers is if you were bowling on a short pattern (34-36 feet) because you have that added backend.  Most typical house shots are now 40 feet with some going as far as 42 to 44 feet. 
Logged
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

Jesse James

  • Hero Member
  • *****
  • Posts: 3613
Re: New benchmark ball
« Reply #19 on: April 23, 2021, 11:47:39 AM »
As soon as I saw this post I thought of the Obsession Tour! But....it's a quite a bit stronger than the Venom Shock!

Can't go wrong with a Zen anywhere! After all, this ball is in one with the universe!

I've seen the Ebonite GB4 thrown and to me......that thing flares a ton!
Logged
Some days you're the bug....some days you're the windshield...that's bowling!

vindo27

  • Full Member
  • ***
  • Posts: 118
Re: New benchmark ball
« Reply #20 on: April 27, 2021, 06:55:08 PM »
Just punched a damn good verge. Excellent ball for heavier house shot. For me it’s the same shape as my venom shock just much stronger
Logged

Strider

  • Hero Member
  • *****
  • Posts: 6757
Re: New benchmark ball
« Reply #21 on: April 28, 2021, 07:27:32 AM »
I did manage to throw the C4 Ordnance a little, but not much to report.  I got it drilled the day after our sport shot league and threw it about 2 games on leftover Turnpike.  The insides were pretty burnt but outside of 5 there was some oil.  It was hard to gauge how clean the ball was based on the conditions, but it definitely had a rounder shape down lane than the Venom Shock, so I was happy with that.

Last night was Shark (48').  Pretty juicy to start, so I used my Phase II early.  I fished around after the first transition.  The VS was a little too clean/jerky - rang a few 10's on shots that looked pretty good.  I was hoping the C4 might be an OK choice next - similar reaction shape to the PII but weaker.  Maybe that was a bad assumption?  It was definitely cleaner than the PII, but really didn't do anything to speak of at the break point.  I didn't buy the C4 to open up the lane or anything, but I thought it would have handled this first transition better.  If there was enough dry for the VS to hook (pretty strong) at the break point, I would have thought the C4 would have done better than it did.  Anyway, I was able to keep moving left with the PII and got it to shape nicely the rest of the night.  Our summer sport league is singles with a regressive point system, so I really didn't want to force the C4 just to see what it could do.  Since you're bowling against the entire league, every pin counts much more than in other formats.

Next week is Dragon (45'), maybe still not prime territory for the C4, but I'll try it some regardless.  I believe the current Shark is 26 mL of oil according to a video I watched with some Motiv guys (MotivLou).  2019 was 30 mL.  I haven't looked up Dragon yet.

Damn Good Verge was also on my radar.  If the C4 ends up a little weaker than what I'd hoped it might be a good choice.  I really like what I've seen from the Zen, but it's at least as strong or maybe stronger than my PII.  With my slower ball speed and slight rev dominance I rarely need anything super strong.  The PII doesn't get used much as it is.
Logged

SVstar34

  • Hero Member
  • *****
  • Posts: 5461
Re: New benchmark ball
« Reply #22 on: April 28, 2021, 10:18:28 AM »
Quote from: Strider on April 28, 2021, 07:27:32 AM

Last night was Shark (48').  Pretty juicy to start, so I used my Phase II early.  I fished around after the first transition.  The VS was a little too clean/jerky - rang a few 10's on shots that looked pretty good.  I was hoping the C4 might be an OK choice next - similar reaction shape to the PII but weaker.  Maybe that was a bad assumption?  It was definitely cleaner than the PII, but really didn't do anything to speak of at the break point.  I didn't buy the C4 to open up the lane or anything, but I thought it would have handled this first transition better.  If there was enough dry for the VS to hook (pretty strong) at the break point, I would have thought the C4 would have done better than it did.  Anyway, I was able to keep moving left with the PII and got it to shape nicely the rest of the night. 

Your original post was wanting something "stronger/smoother than the Shock, but less hook than the P2". From your experience, it sounds exactly like what you got with the C4. Smoother than the Shock is also going to be smoother than the P2.

Your comments on your experience make it sound a little more like you wanted something closer to the P2 but cleaner through the front. That's where something like the Idol Synergy or Brunswick Knock Out comes in
Logged

Strider

  • Hero Member
  • *****
  • Posts: 6757
Re: New benchmark ball
« Reply #23 on: April 28, 2021, 01:00:32 PM »
It might be hard to tell right now.  The C4 is definitely smoother than the VS, so that's what I wanted.  I'm just not sure if it's stronger, weaker, or about the same.  Hard to judge when it did next to nothing at the end of the pattern.  The PII is already pretty smooth.  I'm not sure I believe that the C4 should be smoother (i.e. less back end hook) than the PII.  Before I finally moved deep enough with the PII during the transition if the PII was burning up, the C4 should have retained more energy and had a bit more pop on the back.

 Little by little I'll get a better feel of it's strength.  It's just hard when I don't want to waste frames during scoring.  Not enough time during practice - barely get loose, find what/where I want to play, plus it was obvious that the C4 wasn't the ball for the fresh on a 48 foot pattern.  The house used to put out the patterns on Sunday to practice on, but with Covid they've cut back on hours + services outside of league nights.  I'll have to call and see if they'll have Dragon out for practice this weekend.  I'd definitely like to play around with the C4 when scoring doesn't matter.
Logged
Pages: 1 [2]
« previous next »