win a ball from Bowling.com

Author Topic: Dexter shoe question  (Read 7917 times)

mike300

  • Jr. Member
  • **
  • Posts: 64
Dexter shoe question
« on: December 14, 2020, 09:29:47 AM »
Hey guys, I have a question on the heels for The 9's.  I just bought a pair of The 9's to replace my SST 8's and was told they both use the same sized heels.  I was hoping to be able to put my favorite heel on the new shoes as I hate breaking in new heels but it's about an inch wider so it hangs over the edges of the shoes.  I've looked around the internet and can't find a definitive answer if the heels for the 9's come narrower or if you're just supposed to cut down the heels to fit.  I don't want to order a new heel only to have to cut it down anyways as I have a few heels from the SST 8's already.

 

Bowler19525

  • Hero Member
  • *****
  • Posts: 882
Re: Dexter shoe question
« Reply #1 on: December 14, 2020, 10:09:32 AM »
I believe they are trim to fit.  If your order a new heel, it would need to be trimmed.

mike300

  • Jr. Member
  • **
  • Posts: 64
Re: Dexter shoe question
« Reply #2 on: December 14, 2020, 10:37:51 AM »
I believe they are trim to fit.  If your order a new heel, it would need to be trimmed.

That's what I was figuring.  It does seem odd though that they wouldn't make the correct sized heel for their "best" shoe.

mike300

  • Jr. Member
  • **
  • Posts: 64
Re: Dexter shoe question
« Reply #3 on: December 14, 2020, 10:58:47 AM »
Dexters website does say the heels are designed to fit any existing interchangeable heel Dexters which they clearly don't.  I can make my old heel work by either cutting it down to fit or having the overhanging part towards the outside of the shoe so I don't step on it.

If anyone has experience cutting the heel to fit, what did you cut it with?  Seems too thick for a normal pair of scissors and I don't want to destroy my old heel until I'm comfortable with The 9's.

I hate getting new shoes and it takes me a bit to get comfortable and get them broken in, only reason I switched is because my toe sticks through the front of my SST 8's after about 10 years of using the same pair.

Bowler19525

  • Hero Member
  • *****
  • Posts: 882
Re: Dexter shoe question
« Reply #4 on: December 14, 2020, 12:28:48 PM »
I use normal scissors to trim heels for my Dexters.  The edges may not be perfectly smooth after hacking it with scissors, but it is safer than having the heel stick out too far from the edges and possibly catch on something. 

If I recall, the replacement heels and soles are designed to fit up to a size 15 shoe.  So anyone wearing less than a 15 will need to do some trimming to get them to sit flush with the edge of their shoes.  When Dexter uses the term "fit", I believe they are using that to mean "will attach to", not necessarily be perfectly aligned to the edges without trimming.

Don't expect to get 10 years out of the "9"'s.  A family member bought a pair, and the bottom of the shoe started cracking after less than 2 years.  Emailed Dexter, and they freely told me that the "9"'s are not designed to be durable.  They are designed for comfort and performance, but not durability.  They wouldn't cover them under any kind of warranty as they deemed the cracking/splitting on the bottom to be normal wear and tear.

mike300

  • Jr. Member
  • **
  • Posts: 64
Re: Dexter shoe question
« Reply #5 on: December 14, 2020, 01:39:05 PM »
I use normal scissors to trim heels for my Dexters.  The edges may not be perfectly smooth after hacking it with scissors, but it is safer than having the heel stick out too far from the edges and possibly catch on something. 

If I recall, the replacement heels and soles are designed to fit up to a size 15 shoe.  So anyone wearing less than a 15 will need to do some trimming to get them to sit flush with the edge of their shoes.  When Dexter uses the term "fit", I believe they are using that to mean "will attach to", not necessarily be perfectly aligned to the edges without trimming.

Don't expect to get 10 years out of the "9"'s.  A family member bought a pair, and the bottom of the shoe started cracking after less than 2 years.  Emailed Dexter, and they freely told me that the "9"'s are not designed to be durable.  They are designed for comfort and performance, but not durability.  They wouldn't cover them under any kind of warranty as they deemed the cracking/splitting on the bottom to be normal wear and tear.

I appreciate the info, I'm going to try and get comfortable with the sawtooth heel they came with but if I don't like it, I'll start hacking away on the old heel  ;D

star

  • Hero Member
  • *****
  • Posts: 824
Re: Dexter shoe question
« Reply #6 on: December 14, 2020, 02:13:58 PM »
I’ve been told the best way is scissors for the rough cut then smooth it down with a belt sander or table top grinning wheel.

I just used the grinder as it only needed a small amount removed. Just take your time.
Happy go lucky bowler from the UK.
Specs. 430rpm,18mph off hand. 11-12deg Tilt, 50-60 deg Rotation. PAP 5 1/4 by 3/4 up.
                   R.I.P.
Mo Pinel. The Guru.
Larry Matthews “The Bowling Professor”
Sawbones.
Thong Princess.
Thanks for the FUN times.

milorafferty

  • Hero Member
  • *****
  • Posts: 11171
  • I have a name, therefore no preferred pronouns.
Re: Dexter shoe question
« Reply #7 on: December 14, 2020, 02:40:27 PM »
Man, this entire thread makes Dexter look bad. The bowling industry needs fresh blood in the shoe sector.
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

Bowler19525

  • Hero Member
  • *****
  • Posts: 882
Re: Dexter shoe question
« Reply #8 on: December 14, 2020, 02:56:58 PM »
If Dexter could find a way to sell replacement soles and heels pre-cut to fit each shoe size they sell, it would be more convenient for the customer.  Of course, their sku count would increase exponentially but since they are already cutting the soles and heels to fit brand new "in the box" shoes, they must have the ability to do it. 

I wouldn't even mind ordering the replacements direct from Dexter in multiples if they could keep the price similar to other sources.  The could even just ship them in a padded envelope as well.  Would save on packaging.  Dexter coould just have the sized soles/heels separated in their warehouse in plastic bins, pull the part needed for the order, put it in a padded envelope, and ship it out.

mike300

  • Jr. Member
  • **
  • Posts: 64
Re: Dexter shoe question
« Reply #9 on: December 14, 2020, 02:59:47 PM »
Man, this entire thread makes Dexter look bad. The bowling industry needs fresh blood in the shoe sector.

Totally agree, buy $200 shoes and then grind down parts to make them fit, it's actually laughable.  The only reason I went with The 9's was so I could continue using my old heels.  Oh well, sounds like they won't last very long anyways and I can go in a different direction next time...lol

On a good note, they are pretty comfortable when I put them on.  ;D

MI 2 AZ

  • Hero Member
  • *****
  • Posts: 8156
Re: Dexter shoe question
« Reply #10 on: December 14, 2020, 04:34:27 PM »
_________________________________________
Six decades of league bowling and still learning.

ABC/USBC Lifetime Member since Aug 1995.

milorafferty

  • Hero Member
  • *****
  • Posts: 11171
  • I have a name, therefore no preferred pronouns.
Re: Dexter shoe question
« Reply #11 on: December 14, 2020, 04:59:41 PM »
LOL, beats me! In web page terms, it shows there is a directory on the server with that odd name. No idea why it would be named that.
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

MI 2 AZ

  • Hero Member
  • *****
  • Posts: 8156
Re: Dexter shoe question
« Reply #12 on: December 14, 2020, 05:55:48 PM »
Milo, I wonder if the site got hacked.  The link for the Mass Bias Position shows up as

https://www.ballreviews.com/drilling-layouts/cheap-personal-essay-writers-for-hire-usa/msg2628804/?topicseen#new

.
_________________________________________
Six decades of league bowling and still learning.

ABC/USBC Lifetime Member since Aug 1995.

MI 2 AZ

  • Hero Member
  • *****
  • Posts: 8156
Re: Dexter shoe question
« Reply #13 on: December 14, 2020, 06:00:02 PM »
And the Money Bags Scratch topic shows up as:

https://www.ballreviews.com/northeast/cohort-study-research-proposal/msg2628789/?topicseen#new


Looks like just the ones that were started today.
_________________________________________
Six decades of league bowling and still learning.

ABC/USBC Lifetime Member since Aug 1995.

milorafferty

  • Hero Member
  • *****
  • Posts: 11171
  • I have a name, therefore no preferred pronouns.
Re: Dexter shoe question
« Reply #14 on: December 14, 2020, 06:16:43 PM »
A hack would look a lot different.

I think they got lazy and used a directory structure from elsewhere(instead of building their own) and just stuck it on their site. As long as the post had a correct path for the link, it doesn't really matter what the actual directory name is assigned.

The web master probably maintains multiple websites and grabbed something from another site tree.
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."