win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Is it possible to be inverted with ....  (Read 1445 times)

FBM357

  • Hero Member
  • *****
  • Posts: 1398
Is it possible to be inverted with ....
« on: January 21, 2009, 11:30:00 AM »
a high track?  Something along the lines of 5" or more?  Just wondering.  I've read several post concerning guys with low track and many have said they're 'spinning' the ball.  Just how low would be considered a 'spinner'?  I'm inverted and have loft as well (have a habit of releasing the ball beyond the ankle).  I favor polished pearls and hybrids.  Only throw solids to combat carrydown or pin under ring layouts to calm the reaction. As a result, due to inverted track, I can have a predictable reaction where higher trackers can't.  Yet I can sometimes fall victim to areas where higher trackers tend to excel (especially in recovery from deeper angles)

Ever wonder if there's a 'highly favorable' PAP?

Hope this makes sense ..
--------------------
Hustle (Me) and Flow (Sixcranker)

Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they''re thinking, they will love you.  If you teach someone to think, they will hate you!!!"

Logged

 

mrbowlingnut

  • Hero Member
  • *****
  • Posts: 5727
Re: Is it possible to be inverted with ....
« Reply #1 on: January 21, 2009, 07:38:45 PM »
I was inverted at 5 1/2 over, it was a high tracker spinner release. Changed it and always can revert back to it when needed on fried heads, great for pushing the ball down lane and getting big backend still.

Now I track even farther over 5 5/8 over and 7/8 up hard to get more high track than now for me. Good part is I can lower it easily 1 inch by changing my release and getting around the ball alot more.
Logged

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Is it possible to be inverted with ....
« Reply #2 on: January 22, 2009, 02:36:10 AM »
The chart in the link below gives characteristics for different track diameters (amounts of axis tilt).  --  JohnP

https://www.buddiesproshop.com/36/Asymetrical_Layout_Guide.htm
Logged

FBM357

  • Hero Member
  • *****
  • Posts: 1398
Re: Is it possible to be inverted with ....
« Reply #3 on: January 22, 2009, 06:27:48 AM »
thanks
--------------------
Hustle (Me) and Flow (Sixcranker)

Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they're thinking, they will love you.  If you teach someone to think, they will hate you!!!"

Logged

tekneek

  • Hero Member
  • *****
  • Posts: 5657
Re: Is it possible to be inverted with ....
« Reply #4 on: January 22, 2009, 07:11:39 AM »
Vern pitching beyond the arrows is not loft, that's chunking it, lol
--------------------
Steve
Leading Edge Pro Shop
www.leadingedgeproshop.net
512-755-2947
 
http://stores.ebay.com/Leading-Edge-Pro-Shop


Logged
Steve
Leading Edge Pro Shop
Radical Bowling Technologies Advisory Staff
brinkley2223@yahoo.com
512-755-2947

themagician

  • Hero Member
  • *****
  • Posts: 2979
Re: Is it possible to be inverted with ....
« Reply #5 on: January 24, 2009, 08:04:10 PM »
My axis is 5-3/8 over and a 1/2" down, I track somewhat high. The thing I find is that even though your track has a lot to do with your layouts your tilt and axis rotation is still a big key. All things combined I'm inverted when it comes to track but I find myself needing balls that are smoother reacting by nature, my stuff all seems to flip more than roll which isn't bad but it has made me stay with Hybrids and Solids for the most part. I'm going to try a Cell Pearl out, probably going with a 6" by 4" layout.

I don't think there really is a favorable PAP though, most people can adjust releases and your PAP is only a little amount, how balls are laid out and surface prepped as well as how you release it tilt and rotation wise are big factors.


--------------------

http://www.absolutebowling.com
Logged
-Mike
-MOTIV Staff

FBM357

  • Hero Member
  • *****
  • Posts: 1398
Re: Is it possible to be inverted with ....
« Reply #6 on: January 24, 2009, 08:18:48 PM »
quote:
Vern pitching beyond the arrows is not loft, that's chunking it, lol
--------------------


Steve, you mean to tell me the balls aren't supposed to be thrown overhand? .. Damn, and I thought my balls were 'hooking' in flight!
Logged

FBM357

  • Hero Member
  • *****
  • Posts: 1398
Re: Is it possible to be inverted with ....
« Reply #7 on: January 24, 2009, 08:25:47 PM »
quote:
My axis is 5-3/8 over and a 1/2" down, I track somewhat high. The thing I find is that even though your track has a lot to do with your layouts your tilt and axis rotation is still a big key. All things combined I'm inverted when it comes to track but I find myself needing balls that are smoother reacting by nature, my stuff all seems to flip more than roll which isn't bad but it has made me stay with Hybrids and Solids for the most part. I'm going to try a Cell Pearl out, probably going with a 6" by 4" layout.


Interesting that you like Solids while being inverted.  Guess it's about the condition as well as like you indicated, tilt, rotation etc.  Don't get me wrong, I throw solids, but have to polish them unless I'm throwing with above avg. amount of oil.
--------------------
Hustle (Me) and Flow (Sixcranker)

Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they're thinking, they will love you.  If you teach someone to think, they will hate you!!!"

Logged

themagician

  • Hero Member
  • *****
  • Posts: 2979
Re: Is it possible to be inverted with ....
« Reply #8 on: January 24, 2009, 08:30:27 PM »
quote:
quote:
My axis is 5-3/8 over and a 1/2" down, I track somewhat high. The thing I find is that even though your track has a lot to do with your layouts your tilt and axis rotation is still a big key. All things combined I'm inverted when it comes to track but I find myself needing balls that are smoother reacting by nature, my stuff all seems to flip more than roll which isn't bad but it has made me stay with Hybrids and Solids for the most part. I'm going to try a Cell Pearl out, probably going with a 6" by 4" layout.


Interesting that you like Solids while being inverted.  Guess it's about the condition as well as like you indicated, tilt, rotation etc.  Don't get me wrong, I throw solids, but have to polish them unless I'm throwing with above avg. amount of oil.
--------------------
Hustle (Me) and Flow (Sixcranker)

Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they're thinking, they will love you.  If you teach someone to think, they will hate you!!!"



It is interesting, the way my equipment reacts I always need something that is made to roll earlier, I always tend to get a more lengthy reaction, my Pin down solids act like my buddies pin up Pearls, its always odd but its what i'm used to now so its no biggy. I'm going to be trying a Cell Pearl and try my luck, the last few pearls i've tried didn't work, just way to angular even with pin down layouts.
--------------------

http://www.absolutebowling.com
Logged
-Mike
-MOTIV Staff

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Is it possible to be inverted with ....
« Reply #9 on: January 24, 2009, 08:30:34 PM »
quote:
quote:
My axis is 5-3/8 over and a 1/2" down, I track somewhat high. The thing I find is that even though your track has a lot to do with your layouts your tilt and axis rotation is still a big key. All things combined I'm inverted when it comes to track but I find myself needing balls that are smoother reacting by nature, my stuff all seems to flip more than roll which isn't bad but it has made me stay with Hybrids and Solids for the most part. I'm going to try a Cell Pearl out, probably going with a 6" by 4" layout.


Interesting that you like Solids while being inverted.  Guess it's about the condition as well as like you indicated, tilt, rotation etc.  Don't get me wrong, I throw solids, but have to polish them unless I'm throwing with above avg. amount of oil.
--------------------
Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they're thinking, they will love you.  If you teach someone to think, they will hate you!!!"


But Vern, remember that your ball speed also comes into play and unless you've changed since we last practiced together, neither (edited, oops!) yours (nor mine) was very high. (edited, oops!)

That's why I used many pearls and polished solids. That plus my 20 degrees of tilt. Inverted has nothing to do with that. Lower ball speeds need much less surface.
--------------------
"None are so blind as those who will not see."

Edited on 1/24/2009 9:44 PM
Logged
"None are so blind as those who will not see."

themagician

  • Hero Member
  • *****
  • Posts: 2979
Re: Is it possible to be inverted with ....
« Reply #10 on: January 24, 2009, 08:37:02 PM »
quote:
You have another post where you say you do not use a thumb,if that is the case I have a hard time thinking anything you drill will mimmick that video.


Wrong topic?
--------------------

http://www.absolutebowling.com
Logged
-Mike
-MOTIV Staff

FBM357

  • Hero Member
  • *****
  • Posts: 1398
Re: Is it possible to be inverted with ....
« Reply #11 on: January 24, 2009, 08:41:12 PM »
quote:
quote:
You have another post where you say you do not use a thumb,if that is the case I have a hard time thinking anything you drill will mimmick that video.


Wrong topic?
--------------------

http://www.absolutebowling.com


definitely wrong topic
--------------------
Hustle (Me) and Flow (Sixcranker)

Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they're thinking, they will love you.  If you teach someone to think, they will hate you!!!"

Logged
Pages: [1]
« previous next »