win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Vise vs. Turbo finger grips  (Read 16702 times)

justinmill14

  • Full Member
  • ***
  • Posts: 185
Vise vs. Turbo finger grips
« on: November 27, 2009, 12:36:26 PM »
Which brand do you prefer and why? I was also wanting to know which will last longer without starting to peel or wear down?

I put a pair of vise inserts in two balls at the same time and use them about equally, but the pair on one ball has really started to wear down. I haven't even had them on that long!
Logged

 

THIRTYSIXRED

  • Hero Member
  • *****
  • Posts: 522
Re: Vise vs. Turbo finger grips
« Reply #1 on: November 27, 2009, 11:45:11 PM »
Pro Sports, just like the feel of them better
Logged

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: Vise vs. Turbo finger grips
« Reply #2 on: November 28, 2009, 12:25:13 AM »
I prefer Turbo over Vise because they are softer, but I use Vise sometimes when needing a bit more lift as they have 1/4 forward pitch on the power lift and power oval vs 1/8 forward for Turbo Quads.
--------------------
"Whenever I feel the urge to exercise I lie down until the feeling passes away."

Brick
Logged
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

jorr19

  • Jr. Member
  • **
  • Posts: 97
Re: Vise vs. Turbo finger grips
« Reply #3 on: November 28, 2009, 01:41:18 AM »
i prefer vise over turbo because they are more firm and last longer. they do also seem to have a slightly different contour which i like.
--------------------
Carry is not luck, it's physics.
In my bag... Rogue Cell, Virtual energy, rapid fire pearl, fast, furious, natural.
Logged

the pooh

  • Hero Member
  • *****
  • Posts: 615
Re: Vise vs. Turbo finger grips
« Reply #4 on: November 28, 2009, 02:14:40 AM »
I prefer Vise, their quality control seems to be better. Turbo sizes seem to vary a bit.
--------------------
the pooh
Logged
the pooh

jorr19

  • Jr. Member
  • **
  • Posts: 97
Re: Vise vs. Turbo finger grips
« Reply #5 on: November 28, 2009, 02:16:10 AM »
agree with you pooh, good point.

--------------------
Carry is not luck, it's physics.
In my bag... Rogue Cell, Virtual energy, rapid fire pearl, fast, furious, natural.
Logged

DON DRAPER

  • Hero Member
  • *****
  • Posts: 5576
Re: Vise vs. Turbo finger grips
« Reply #6 on: November 28, 2009, 11:57:32 AM »
i've used nothing but vise finger inserts and thumb slugs since 1995. i tried both turbo 2-n-1 and tenth frame....didn't like either.
Logged

Nor Cal Bowler

  • Hero Member
  • *****
  • Posts: 1535
Re: Vise vs. Turbo finger grips
« Reply #7 on: November 28, 2009, 12:31:19 PM »
Vise by far. Better quality over any company!
--------------------
_____________________________________________

http://s450.photobucket.com/albums/qq229/NorCalBowler/visionary/

Logged

Dan Belcher

  • Hero Member
  • *****
  • Posts: 3954
Re: Vise vs. Turbo finger grips
« Reply #8 on: November 28, 2009, 02:45:19 PM »
I use both Vise Vacu-Grips and IT thumbs.  Their quality is just better and more consistent than Turbo's in my experiences.
Logged

BrunsWolf

  • Hero Member
  • *****
  • Posts: 588
Re: Vise vs. Turbo finger grips
« Reply #9 on: November 28, 2009, 11:09:19 PM »
Vise grips are the only ones i'll use. I like the harder feel and I also noticed a little difference grip to grip from Turbo. Vise grips hold up really well for me so it helps not having to spend that extra little bit to replace grips as often
--------------------
Brunswick Advisory Staff

Jared Wolf
Jonesboro, AR
www.bowlingchat.net

The opinions expressed are solely those of the writer and not of Brunswick Corporation.
Logged
Jared Wolf
Jonesboro, AR
Brunswick Advisory Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

Doug Sterner

  • Hero Member
  • *****
  • Posts: 4395
Re: Vise vs. Turbo finger grips
« Reply #10 on: November 29, 2009, 08:45:56 PM »
I sell Turbo in my shop because people like the soft feel.

Yes they have a 1/8 lift instead of 1/4 lift so that can be an issue with a new customer who wants inserts replaced in a ball.

I will agree that there are variations in size with Turbo. I have noticed that there are different stampings which shows they are using different molds for different batches. I have seen that if you stick to one color of insert you tend to not have that variation.

Now with that said I personally use the Vise semis in my own balls. I do not care for the stiffness of the material used but I need the semis to keep me from"hooking" the lip when my fingers exit the holes. I know that Turbo makes the semis as well but the Quad 2's are tough to find using my normal supply channels. I know I can get them from Turbo direct but....
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
For Real Time Interactive Bowling Conversation:
BowlingChat.net
Logged
Doug Sterner
Doug's Pro Shop
Owego, NY

Proud Member of the NRA
Fighting to uphold the Constitution of the U.S.
Pages: [1]
« previous next »