win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Back end finish  (Read 5753 times)

strikeking

  • Sr. Member
  • ****
  • Posts: 346
Back end finish
« on: July 28, 2012, 02:21:57 PM »
What ball has the sharpest "back-end" with all things equal. Lay-out, revolutions, lane surface, speed etc.? My chart shows: Global The Nuts Pearl, Columbia Ransom Demand, Encounter, Elite Platinum, Hammer No Mercy and No Mercy Beat'n, Taboo Electric Silver/Blue, Roto Grip Epic Odyssey.  All are rated at 17.5 Back-end.
Logged
Strikeking

 

Impending Doom

  • Hero Member
  • *****
  • Posts: 6288
Re: Back end finish
« Reply #1 on: July 28, 2012, 04:38:52 PM »
Having only thrown the nuts pearl, I have to say it does hang a left pretty hard. I like it. Probably going to drill a second one to backend even harder.
Logged

900DJ

  • Sr. Member
  • ****
  • Posts: 272
Re: Back end finish
« Reply #2 on: July 28, 2012, 05:30:35 PM »
While the Ransom Demand is the best all around ball I have ever thrown, I don't consider it to be as sharp on the back end as rated, more of a strong arc.  But, its at 3000 with no polish, pin down drilling.  Never tried it with polish.  Don't have any experience with the others mentioned, normally a strong pearl would have the sharpest back end given the proper condition.
Logged

Brunswick_fan_BrandonH

  • Hero Member
  • *****
  • Posts: 786
Re: Back end finish
« Reply #3 on: July 31, 2012, 07:55:11 AM »
The Nexxxus F(P+S) has the most hook on the backend in the Brunswick Lineup! It has more snap than the Nexxus F(P+R) and is 4 boards stronger overall. The Nexxxus F(P+S) is clean through the front but really picks up when reaching friction. The WWRD for the Nexxxus F(P+S) is August 8th.
Logged
Vise Staff Member

Russell

  • Hero Member
  • *****
  • Posts: 5121
Re: Back end finish
« Reply #4 on: July 31, 2012, 08:58:52 AM »
I have to be honest I don't see really any of the balls you listed as being true "backend" balls.  Sure they hook a good bit downlane...but backend comes from two things....lots of glide and then a quick release of energy.  Balls with big cores and strong covers tend to bleed energy more in the midlane...thus losing some backend pop.

To me the biggest change of direction balls are things like Victory Roads, Bandits, Eruptions, 708As...etc.  Stuff that stores lots of energy until they encounter enough friction to unload it all at once.
Logged

sparker840

  • Newbie
  • *
  • Posts: 4
Re: Back end finish
« Reply #5 on: July 31, 2012, 09:47:41 PM »
hey russell you seem to be pretty smart about bowling balls? do u drill equipment? maybe run a pro shop in atlanta area lol!!!!what's up guy crossroads has a little bit of back ends too or is it the bowler? lol
Logged

Russell

  • Hero Member
  • *****
  • Posts: 5121
Re: Back end finish
« Reply #6 on: July 31, 2012, 10:02:30 PM »
Quote from: sparker840 on July 31, 2012, 09:47:41 PM
hey russell you seem to be pretty smart about bowling balls? do u drill equipment? maybe run a pro shop in atlanta area lol!!!!what's up guy crossroads has a little bit of back ends too or is it the bowler? lol


I may have a shop or something :)  Crossroad is pretty angular, but bleeds just a touch more energy off in the midlane than the Victory Road.  I have both drilled almost identical and the Victory Road is a direct ball down from the Crossroad.  It lets me stay in the same place and just ball down.
Logged

MrNattyBoh

  • Hero Member
  • *****
  • Posts: 674
Re: Back end finish
« Reply #7 on: August 01, 2012, 08:04:36 AM »
Definitely take the Encounter out of the equation. I have one and it is more mid-lane roll than sharp back-end. If i am playing straight the ball is a beast, if I am bending it, the Encounter just kind of fizzles down lane. Just my 2-cents.
Logged

lbss831

  • Hero Member
  • *****
  • Posts: 655
Re: Back end finish
« Reply #8 on: August 01, 2012, 08:23:32 AM »
The Taboo Jet Black wud be good choice
Logged

Artimust

  • Hero Member
  • *****
  • Posts: 795
Re: Back end finish
« Reply #9 on: August 01, 2012, 02:12:49 PM »
I really like my Epidemic!  Goes nice and long with a tremendous neck-jerking left turn!   :o
Logged

Tripcee

  • Sr. Member
  • ****
  • Posts: 294
Re: Back end finish
« Reply #10 on: August 02, 2012, 01:20:08 AM »
I'm going to go with the Jet Black Taboo. The response when it hits friction is unbelievable.
Logged
In the Bag:
Seismic Evo Hybrid
Seismic Evo Pearl
Seismic LynX
Seismic Axion

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Back end finish
« Reply #11 on: August 02, 2012, 11:23:16 AM »
I agree with the Taboo black statement.

As a reaction maximizer I find the ball with a ball trial layout.  Go long and snap to be virtually unusable!

I usually do on these monsters.  A friend of mine who is very good and a mostly up the backer is KILLING with the Taboo Black.

For me at the same ball trial of Ebonite Columbia and Track balls the Track 716T was great for all of the opposite reasons.  Smooth heavy traction with a continuous penetrating backend.  Lefty heaven!

REgards,

Luckylefty
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

strikeking

  • Sr. Member
  • ****
  • Posts: 346
Re: Back end finish
« Reply #12 on: August 02, 2012, 02:43:06 PM »
Great answers and info!  Thank you to ALL.
Logged
Strikeking
Pages: [1]
« previous next »