win a ball from Bowling.com

Author Topic: strong length ball  (Read 3456 times)

3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
strong length ball
« on: January 18, 2011, 11:57:51 AM »
What is the strongest pearl ball on the market today? I'm looking for a ball with great length and very angular move on the back.



 

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: strong length ball
« Reply #1 on: January 18, 2011, 08:55:31 PM »
While pearls such as the Jigsaw Trap seem to fall into this category, I'd suggest you don't limit yourself to resin pearls in this category of balls. There are polished solids and particles and particle pearls that fall into this category also.
 
Nomad Solid
Sting Widowmaker
Black Widow Venom (discontinued but still around; serious backend ball) 
Polished Mission 2.0
607A
Reign Supreme  & Dagger(combo of solid and Pearl)
AMF SHredder
Track 718A (will probably be in this category) 
 
Dagger 


"None are so blind as those who will not see."
BowlingChat.net
"None are so blind as those who will not see."

3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
Re: strong length ball
« Reply #2 on: January 18, 2011, 09:23:59 PM »
Any other ball suggestions? i bowl on a old wood surface where the heads can dry up but oil tends to stay in the middle. two guys on my team bought the dagger and are rolling very good. so length to get through the heads and strong backend to move through some oil is the key.



Locke

  • Hero Member
  • *****
  • Posts: 1482
Re: strong length ball
« Reply #3 on: January 18, 2011, 11:18:44 PM »
The Nomad Dagger seems to be a great piece as you mentioned. We have 2 guys on my team that just picked them up and I am in awe of that ball. So effortless through the heads but gives a great angle and energy transfer to pins.

Always be sincere, even when you don't mean it
Always be sincere, even when you don't mean it.

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: strong length ball
« Reply #4 on: January 19, 2011, 12:10:55 AM »
Basically, watch out for a reactive pearl with a higher RG and a high differential. This offers a good technical basis for a ball that keeps its energy longer, and delivers it quickly if drilled for length and pop (with a high pin in a strong position, and CG/MB stacked).

I would not call it the strongest pearl on the market, but from what I have seen Brunswick's C-System 2.5 and 4.5 would IMHO qualify. Maybe add some gritless polish for even more pop, but on wood these things should be more than enough, and other manufacturers have similar "packages" in store. Probably a mid-range pearl like the aforementioned Nomad will suffice, too, for less budget.


DizzyFugu - Reporting from Germany
Confused by bowling? Check out BR.com's vault of wisdom: the unofficial FAQ section
DizzyFugu ~ Reporting from Germany

jrs813

  • Full Member
  • ***
  • Posts: 239
Re: strong length ball
« Reply #5 on: January 19, 2011, 06:30:07 AM »
from what i have read and heard , the storm anarchy might just be the ball to fit the bill.

 



kingpin268

  • Hero Member
  • *****
  • Posts: 1680
Re: strong length ball
« Reply #6 on: January 19, 2011, 07:26:34 AM »
C system 2.5. One of the strongest pearls I've thrown in a long time. Ball has a strong midlane read, and a charging backend to finish it off. I keep mine highly polished because it's too strong on all but long patterns. Mine's drilled pin up, about 4" from pap, MB kicked out towards VAL. Very strong layout for me, and the ball is phenomenal. Love the continuation and drive through the pins. It is noticeably different with the CFT coverstock. 

Pennsylvania State University

Dan Belcher

  • Hero Member
  • *****
  • Posts: 3954
Re: strong length ball
« Reply #7 on: January 19, 2011, 07:42:30 AM »
I just punched up an Anarchy myself, and got to throw it for the first time last night, and yes, it seems extremely, extremely strong. I redid the surface to 500/4000 abralon and used roughly a 5x5x3 layout (pin just above and a little left of ring finger, MB directly next to the thumbhole), and it really, really revs up on the back part of the lane.  Even with that surface I still was able to get good length with a very defined motion on the back, but the surface also helped make it a little easier to control and more predictable. I need to get more experience with it and try it wood lanes as well, but as far as both ability to handle oil and ability to cover boards on the backend, the Anarchy seems to fit that very well. I do love the very continuous motion it gives me when it does hook -- it's not a hook/stop motion at all, it just keeps driving.
 



jrs813 wrote on 1/19/2011 7:30 AM:
from what i have read and heard , the storm anarchy might just be the ball to fit the bill.


 





Andyman3333

  • Full Member
  • ***
  • Posts: 197
Re: strong length ball
« Reply #8 on: January 19, 2011, 08:50:11 AM »
Just punched up a Brunswick Damage and it's one of the cleanest balls through the front that I've ever thrown.  Relitively well priced too.  I had a Storm Thunderstruck and a Brunswick Swarm prior to this, both with a long pin and I don't think either were as clean through the front as this Damage is.  Really great ball and strong motion on the back part of the lane. 


PROFILE
340-370 revs
18 mph
230 book on THS
200 book on PBA

In the bag:  C-System Alpha Max, 3.5, 2.5, Wicked Siege, Evil Siege, Damage, Slingshot, Avalanche Slide, & my trusty Swarm. 

3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
Re: strong length ball
« Reply #9 on: January 19, 2011, 07:05:12 PM »
what about the reign supreme? it's a hybrid like the dagger. does the reign supreme have enough angularity and strength on the back?



tywithay

  • Sr. Member
  • ****
  • Posts: 408
Re: strong length ball
« Reply #10 on: January 19, 2011, 09:10:38 PM »
Lane #1 Time Bomb. I have a video of me throwing mine on youtube, it's nasty.



ecc0_9879

  • Hero Member
  • *****
  • Posts: 1132
Re: strong length ball
« Reply #11 on: January 19, 2011, 09:42:31 PM »
The track 607 a se is the most angular ball I have every thrown. It looks like some one kicks the ball left.


http://s572.photobucket.com/albums/ss169/ecco_9879/

neverbackdown_x7x

  • Hero Member
  • *****
  • Posts: 764
Re: strong length ball
« Reply #12 on: January 20, 2011, 04:06:06 AM »
I would also mention the Motiv SR2, Columbia 300 Sharp Noize and Track 920A and 505A. If you have not seen the video of the new Mission Domination that could possibly be in this catagory.



3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
Re: strong length ball
« Reply #13 on: January 20, 2011, 08:54:26 PM »
Is the Track 607A SE stronger than the Reign Supreme?