BallReviews

General Category => Miscellaneous => Topic started by: 1MechEng on July 06, 2009, 02:20:08 PM

Title: Suggestion(s) for a very angular Pearl needed
Post by: 1MechEng on July 06, 2009, 02:20:08 PM
Let me start by saying that I know that ball motion is most influenced by release, coverstock, and drilling.

What I am looking for is the combination of core and covertock (in a current ball) that offers really good potential for a ball that goes long and makes an immediate left on the dry. I'm talking about a ball that has a very angular move as soon as it hits the dry and can cover a lot of boards in a short time. (Note: this ball will be for my brother; specs and game are similar to mine). Conditions will be medium oil house shot, 35-37' long. Ball specs will be 14 or 15 lb, 3 inch pin.

Company manufacturer unimportant - we'll consider all reasonable suggestions.
Thanks in advance!


--------------------
======================
Dan
======================
Engineering * Bowling = a fun and practical application of rotational kinematics.

Bowling Nerd Herd (TM) Member
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: tdub36tjt on July 06, 2009, 10:21:35 PM
900 Global Break Point Pearl
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: GoDenny11 on July 06, 2009, 10:24:16 PM
I would suggest a One Pearl by Ebonite with the pin above bridge. Mine goes long and takes a nice left turn. Just another suggestion. Good Luck...
--------------------
Ebonite: Bowl to Win
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: Lillen on July 06, 2009, 11:01:43 PM
Track 715A...
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: Xcessive_Evil on July 06, 2009, 11:19:30 PM
quote:
Track 715A...


The 715 isn't pearl.  You may be thinking the 505.
--------------------
You may be the better bowler, but my car would blow the doors off of yours.
http://smg.photobucket.com/albums/v690/Phoenix_RsX/Arsenal/
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: 5150BWLR on July 07, 2009, 12:00:02 AM
Lane Masters Black pearl Reactive... Hands down the most angular ball I've thrown since the Storm Bolt...for me that is.
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: TheFreeAgent on July 07, 2009, 12:52:38 AM
Wouldnt an Left turn make it skid flip? But anyway I'd say the one pearl also it is very angular
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: TheFreeAgent on July 07, 2009, 12:55:01 AM
Wouldnt an Left turn make it skid flip? But anyway I'd say the one pearl also it is very angular
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: SVstar34 on July 07, 2009, 01:19:49 AM
I agree with what has been said about the One Pearl.

I'd say:

Ebonite One Pearl
Ebonite Magic Touch
Hammer Hot Sauce Pearl
--------------------
My Arsenal:
Rogue Cell (coming soon)
Bounty(4.5 x 4.75 Fresh 1000 Abralon)
Twisted Fury(5 x 4 500 Abralon + Reacta Shine)
Raw Hammer Pain(Leverage 1000 Abralon)
Blue Vibe(5 x 5 4000 Abralon + Reacta Shine)

Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: bestbudzs24 on July 07, 2009, 01:21:11 AM
since this topic is pretty much what i look for in bowling balls i will give this one a shot. here is a list from the balls that i have or have had that fit this topic. all balls drilled pin over the bridge for max lenght and snap on the backend.

Lane #1 Colbalt Bomb pearl
Lane #1 Chainsaw Massacre
Storm Street Rod pearl
Storm Fast
Morich Awesome Flip
Hammer Hot Sauce
Roto-Grip Mars
Roto-Grip Neptune

you really cant go wrong with any of these balls. they all work very well on mediums with the exception of the mars and the neptune which shine on the lighter side of mediums. but if i had to pick just one off this list it would be without a doubt the Colbalt Bomb pearl. it is for me the most angular ball i have ever thrown and i have thrown alot of them. hope this helps and good luck with your selection.
--------------------
" bowling is for one thing and one thing only to make money"
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: VIXIV on July 07, 2009, 01:32:19 AM
The Hammer Tennis Ball (Burn) is pretty angular, and from what I've seen should work really well on the type of condition you described.
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: Dan Belcher on July 07, 2009, 07:22:51 AM
Going back a couple years, if you can find an old Storm Fired Up or even Spit Fire, I'd jump on that.
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: shrapnel on July 07, 2009, 07:27:34 AM
How about a T-Road pearl?  Ball is discontinued but has an amazing amount of recovery.

Jeff S.
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: triggerman on July 07, 2009, 07:32:05 AM
all great suggestions, but based upon his profile (which I am sure most of you didnt read) he is a med speed bowler at best with tweener revs.  35-37 ft of oil is short, all of these balls are fairly strong, meaning at 37 ft they are turning left, and heading for the 7 pin.  If he had more speed and could push to a break point down lane those would be great choices.  

I personally would look at some of the mid level stuff, you are going to need some easy length to get to a break point to utlilize the snappiness

Sorry cant offer up many suggestions as I have been out of the game as far as anything non lane 1

but I will say for a mid priced ball, both the Link by 900 Global and the new Gemstone are very misleading.  I am sure some of the new big b stuff in the mid line could fill this too.  Also the new Sideways by AMF looks pretty good as well  and for a few more bucks the upcoming Seismic Epicenter looks good.  Dont let the dynamo x2 fool you either, great length with a ton of recovery
--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby

Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: LaneHammer20 on July 07, 2009, 07:38:35 AM
Break pearl or Break point pearl will both be angular as they come, and wil keep that reaction longer.

I also second the Black pearl reactive
--------------------
What is sandbagging???

Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: bowlerdawg on July 07, 2009, 07:53:52 AM
supernova XP
Solaris pearl

both were monsters for me, and contrary to others post, I think you have the speed to carry the stronger pearl....JMO
--------------------
c/2 flavored kool - aide is my favorite, but I am looking for black raspberry flavor

Edited on 7/7/2009 8:11 AM
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: triggerman on July 07, 2009, 07:59:28 AM
there you go doubting me again lol

the xp is a good long ball as well



quote:
supernova XP
Solaris pearl

both were monsters for me, and contrary to Trigg's post I think you have the speed to carry the stronger pearl....jmo
--------------------
c/2 flavored kool - aide is my favorite, but I am looking for black raspberry flavor

--------------------
www.bowlingballexchange.com

Triggerman

F.O.S Loud, F.O.S. Proud

Lane #1 Baby

Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: leftyinsnellville on July 07, 2009, 08:01:48 AM
Although recently discontinued, the Brunswick Swarm sounds like it could fit the bill.  Reasonably priced ball, with a hard snap off the dry.

Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: on July 07, 2009, 08:21:52 AM
The Rattler is more angular for me than my Swarm, but both are nice. You can polish a Wild Thing, too. This ball is amazing!


--------------------
Lane Carter, Strike Zone Pro Shops - Salt Lake City, Utah
Brunswick Pro Shop Staff

www.brunswickbowling.com

The opinions expressed are solely those of the writer and not of Brunswick Corporation.
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: bowlingaddiction on July 07, 2009, 08:47:12 AM
Seismic Solaris
Lane 1 Chainsaw Massacre
900 Global Break Point Pearl
AMF Nighthawk Pearl
VISIONARY NEW BREED PEARL
Motiv GT1
--------------------
Austin Burris
accountsofabowlingaddict.blogspot.com
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: UpstateProShopChris on July 07, 2009, 11:42:43 AM
The Rattler or the new Python..both are great choices in the situation you described.
--------------------
Chris Garrett
Upstate Pro Shop
Greenville, SC - 1-866-490-9980
Upstateproshop@charter.net

PBA Member
Brunswick Advisory Staff
Vise Regional Staff
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: los2003 on July 07, 2009, 12:43:53 PM
ok you have a couple options.. a fast, one pearl, hot sauce, and  venom
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: ambi1 on July 07, 2009, 12:57:04 PM
you could look into the angular one also.  nice carry even with not so nice releases.

good luck
--------------------


DARK BEER IT IS THEN!
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: tc300 on July 07, 2009, 01:07:20 PM
V2 pearl!!!!  find one
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: icewall on July 07, 2009, 01:39:02 PM
id say:

rapid fire pearl
kinetic pearl
break point pearl
--------------------
tweener
high track with medium revs
medium speed
specs and ball layouts in profile

currently throwing
Visionary (O.P. / O. SS.)
Rotogrip (rogue cell)
lanemasters (black pearl)

Edited on 7/7/2009 1:39 PM

Edited on 7/7/2009 1:41 PM

Edited on 7/7/2009 1:41 PM
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: Lillen on July 07, 2009, 02:06:28 PM
quote:
quote:
Track 715A...


The 715 isn't pearl.  You may be thinking the 505.
--------------------
You may be the better bowler, but my car would blow the doors off of yours.
http://smg.photobucket.com/albums/v690/Phoenix_RsX/Arsenal/



My bad, didn't read the headline properly..  
--------------------
-------------------
www.eko-bowling.se
www.teamtuba.se
www.dteracing.se
http://www.festis.se/orange.html
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: lenstanles703 on July 07, 2009, 03:40:31 PM
VBP Ogre SS much stronger than specs
VBP New Breed Pearl very snappy
--------------------
"We are all one"
Visionary test staff member
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: Crash7189 on July 07, 2009, 07:02:56 PM
The ball that goes longest and snaps like a mother for me is the Emerald Vibe.
When I throw it my team mates say I thought it was never coming back. Its ok for med to light oil. On a sport shot you must stay up the back or it will skid to much. I have bowled 300/805 with it. and best thing low priced about $120. so it payed for its self many times.
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: Nicanor on July 07, 2009, 07:09:53 PM
How about the Reign? I haven't seen it thrown myself, but I talked to Rhino Page in Vegas and he said its a good long ball with a great back end.


--------------------
Nicanor (Ten On The Deck)
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: BiGtYmEr300 on July 07, 2009, 07:13:09 PM
I would say go for a Visionary New Breed Pearl or a 900 Global Break Point Pearl. These are two of the most angular balls I have ever seen.
--------------------
*****************************
*****************************
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: six pack on July 07, 2009, 07:19:17 PM
pin up Tropical storm with a 4000 wet/dry and moonshine polish! I have one and it will skid a good amount and snap as hard as anything off the dry.
--------------------
The harder I try the harder they fall
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: clt2244 on July 08, 2009, 07:30:11 AM
Break Point Pearl
Cell Pearl
Black Widow Pearl

those have to be the most angular pearls ive seen/throw
--------------------
Only throw the good stuff, Roto/Global.
www.bowlsk.com/view-profile.html

Edited on 7/8/2009 7:31 AM
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: tloy on July 08, 2009, 11:09:34 AM
Cell Pearl drilled 4x4 pin above fingers.... Very angular
--------------------
Todd Loy
Roto Grip King of Them All!!!!
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: delpzooka on July 08, 2009, 11:41:25 AM
Hot Sauce
Title: Re: Suggestion(s) for a very angular Pearl needed
Post by: 1MechEng on July 08, 2009, 09:49:05 PM
Thanks for the replies, everyone!
--------------------
======================
Dan
======================
Engineering * Bowling = a fun and practical application of rotational kinematics.

Bowling Nerd Herd (TM) Member