win a ball from Bowling.com

Author Topic: What for Urethane?Purple Hammer or bust?  (Read 8930 times)

ccrider

  • Hero Member
  • *****
  • Posts: 2230
What for Urethane?Purple Hammer or bust?
« on: January 26, 2020, 07:23:33 PM »
Since I have not posted in a while, I must first say hello to everyone. Have not been bowling much but trying to get back started.

I like to keep a urethane ball in my lineup. When all else fails, I can generally pick one up and bowl average. I see that everyone has their offerings. My brother insists that I get a Purple Hammer Pearl. He says their is nothing out like it. They are hard to find and bring a premium. I am hesitant to believe that no one else is making a comparable urethane. However, my brother is a pretty good bowler and bowls 2 to 3 nights a week. He says that he can use the Purple in most any shot and score with it.

So, what’s the story on the urethane balls out now?

I just ordered a Gravity Evolve although I expect to have to play with the surface to use it on a THS. I match up well with that core so I had to give it a spin. Considering the V2 release as my control piece, but have not decided.
Thanks
CC

 

BeerLeague

  • Sr. Member
  • ****
  • Posts: 426
Re: What for Urethane?Purple Hammer or bust?
« Reply #16 on: January 28, 2020, 07:33:27 AM »
Drill a short pin iQ Tour and don't look back. You'll get more mileage out of something like that. 

I get the nostalgia part of urethane.. I drilled a Pitch Black when they came out and used it quite a bit on the 36 ft pattern we were on at the time.  Since then, it has sat on my ball rack in the basement.

avabob

  • Hero Member
  • *****
  • Posts: 2779
Re: What for Urethane?Purple Hammer or bust?
« Reply #17 on: January 28, 2020, 09:03:29 AM »
I just drilled a vintage phantom.   After it lane polished the look was very similar to my purple hammer on one house shot I practice on.   The line between resin and urethane is getting more blurred as new shells come out.  Not surprising since resin is urethane with a resin additive.

ccrider

  • Hero Member
  • *****
  • Posts: 2230
Re: What for Urethane?Purple Hammer or bust?
« Reply #18 on: January 28, 2020, 01:01:05 PM »
Thanks for the responses. I was hoping it was all just hype. Evidently the Purple offers a look that no one else has.

avabob

  • Hero Member
  • *****
  • Posts: 2779
Re: What for Urethane?Purple Hammer or bust?
« Reply #19 on: January 28, 2020, 01:29:04 PM »
To me the Purple Hammer gives the look that Storm was trying to get with Fever Pitch and Motive from the Covert Tank.   Nothing magic,  but the best urethane look I have had
« Last Edit: January 28, 2020, 08:48:56 PM by avabob »

BeerLeague

  • Sr. Member
  • ****
  • Posts: 426
Re: What for Urethane?Purple Hammer or bust?
« Reply #20 on: January 29, 2020, 08:07:16 AM »
I'm quite certain the Purple Hammer will continue in the line up .... just wait until production starts back up.  Brunswick will continue to use the same cover formulas.

The Storm Pitch Purple seems interesting ... it has the bigger backend shape the Purple Hammer crowd likes.

avabob

  • Hero Member
  • *****
  • Posts: 2779
Re: What for Urethane?Purple Hammer or bust?
« Reply #21 on: January 29, 2020, 12:47:31 PM »
Surprised nobody talks about the core specs.   2.65 rg, .015 diff way tamer than almost anything else   out there.  Shell also unique.  Doesnt lane polish to any degree.   

tkkshop

  • Hero Member
  • *****
  • Posts: 1173
Re: What for Urethane?Purple Hammer or bust?
« Reply #22 on: January 29, 2020, 01:07:13 PM »

The purple does lose some juice. 6 boards in 60 games is quite a bit for a "urethane" cover.

Steven

  • Hero Member
  • *****
  • Posts: 7680
Re: What for Urethane?Purple Hammer or bust?
« Reply #23 on: January 29, 2020, 07:33:23 PM »
^^^^^^^^

So 60 games with no cleaning or surface prep. Is there any surprise with the results?

tkkshop

  • Hero Member
  • *****
  • Posts: 1173
Re: What for Urethane?Purple Hammer or bust?
« Reply #24 on: January 29, 2020, 07:57:32 PM »
I don't recall him saying that he never cleaned the older PH.

Steven

  • Hero Member
  • *****
  • Posts: 7680
Re: What for Urethane?Purple Hammer or bust?
« Reply #25 on: January 29, 2020, 08:00:26 PM »
I don't recall him saying that he never cleaned the older PH.

I watched carefully. Unless I missed it, there was no mention of cleaning or surface refresh. My Purple stays consistent by using the same cleaning/surface prep regime I apply to my reactives.
« Last Edit: January 29, 2020, 08:04:24 PM by Steven »

tkkshop

  • Hero Member
  • *****
  • Posts: 1173
Re: What for Urethane?Purple Hammer or bust?
« Reply #26 on: January 29, 2020, 08:19:00 PM »
I don't recall him saying that he never cleaned the older PH.

I watched carefully. Unless I missed it, there was no mention of cleaning or surface refresh. My Purple stays consistent by using the same cleaning/surface prep regime I apply to my reactives.
I don't think that it is fair to assume he never cleaned it just because he never mentions it. Can we assume that he did clean the PH and never mentioned it? It can go either way. Can you now make a video comparing your cleaned one to a new one?

BowlingForDonuts

  • Hero Member
  • *****
  • Posts: 1120
Re: What for Urethane?Purple Hammer or bust?
« Reply #27 on: January 29, 2020, 08:45:35 PM »
60 games without a surface refresh and you are going to lose multiple boards even with an old Blue Hammer.
Here today.  Gone tomorrow.

Steven

  • Hero Member
  • *****
  • Posts: 7680
Re: What for Urethane?Purple Hammer or bust?
« Reply #28 on: January 29, 2020, 09:26:20 PM »
I don't think that it is fair to assume he never cleaned it just because he never mentions it. Can we assume that he did clean the PH and never mentioned it? It can go either way. Can you now make a video comparing your cleaned one to a new one?

Well, it's a pretty important detail to leave out if he did. Which to me suggests he didn't.
 
I have 3 modern Urethanes -- the Purple Hammer, Black Hammer and the Hot Cell. They all quickly develop shine with head oil and tend to lose some reaction after a handful of games. A good cleaning followed by an Abralon pad bring the balls back to life. A video isn't needed to show this.

2handedrook12

  • Hero Member
  • *****
  • Posts: 1702
  • Be yourself and keep it simple.
Re: What for Urethane?Purple Hammer or bust?
« Reply #29 on: January 29, 2020, 09:54:38 PM »
Surprised nobody talks about the core specs.   2.65 rg, .015 diff way tamer than almost anything else   out there.  Shell also unique.  Doesnt lane polish to any degree.
I might be in the minority on this page, but not in the competitive bowling world. I got a 16 lb Purple several months after release date. I'm more on the rev dominant side, but I have speed to help get it down the lane. It flared much more than my Pitch Black at the time, but hooked 10 boards more. I've had 2 15 lb Purples now with stronger layouts than my 16 lb was and they both flare significantly less and cover less boards as a result. I see carrydown as quick as a typical urethane and the loss in performance due to oil on the cover (even while using a shammy). I prefer the 16 lb one way more because I didn't see the effects of carrydown and it was usable from about anywhere on the lane.

I do think balls like the IQ Tour and Phantom are better (maybe even short pin them if you want the urethane look) as they offer pretty much the same kind of idea with more versatility. But one major thing to note is that you may see those kind of balls go straighter when a lot of thane is being used while the actual urethanes (or pseudothanes as I refer to them) will react about the same as they normally do, just a faster carrydown process.
« Last Edit: January 30, 2020, 07:16:57 AM by 2handedrook12 »
League: Pitch Purple, Destiny Magenta
Testing: MVP
Interests: Black Widow, Proof Solid, Idol Pearl

avabob

  • Hero Member
  • *****
  • Posts: 2779
Re: What for Urethane?Purple Hammer or bust?
« Reply #30 on: January 29, 2020, 11:03:38 PM »
Urethane is a condition specific niche tool for most of us.  Having said that the purple hammer fills that niche better than any urethane I have thrown