win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Smoothest Rolling Ball for Dry Back Ends  (Read 2763 times)

dw23

  • Hero Member
  • *****
  • Posts: 986
Smoothest Rolling Ball for Dry Back Ends
« on: August 03, 2003, 10:23:27 PM »
I know I can drill a ball to roll smoother than advertised but I want to know others choices for a smooth rolling medium oil ball for dry back ends. I am encountering very hard moving back ends lately. Although I can move deep inside and swing a couple of balls or flatten out the roll off my hand I still think I'm throwing the wrong equipment on this condition. I through mostly Track equipment with one Storm ball at the moment but I will try just about anything. Your help is appreciated.
DW
Logged
Deven Walls

Pro Shop Staff Member
Lord Field/Lane Masters
www.lordfield.com and www.lane-masters.com
"Changing Bowling, One Bowler At A Time"

 

TwoFourEightNineNine

  • Hero Member
  • *****
  • Posts: 1714
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #1 on: August 04, 2003, 01:33:15 PM »
For the medium patterns with the big backends, i use:

I am a 18.0mph bowler, with a 270average rev rate. PAP: 5"over, 1/2" up.

15# Ebonite V2 Pearl; 3-4" pin. Pin @ 12:00 over the bridge, CG stacked below it @ center of grip.

Even rolling ball with little pop in the backend. Allows the pearlized coverstock to clear the heads and continue an even roll into the pocket. It's not very jerky.

--------------------
-Jeremy Vitug
BallReviews.com Burning Sensations Bowling Team



Logged
24899

omegabowler

  • Hero Member
  • *****
  • Posts: 1470
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #2 on: August 04, 2003, 01:47:21 PM »
the smoothest ball I have rolled to date is the turbo diesel. it's an arcing ball but the drill pattern keep the flair low.

it's a 1 or 1-1/2" pin. pin is under bridge and the cg is towards the track.
105 deg layout 5.5" pin to pap.

kind of looks like a lefty drill.

the ball gets into a roll early and has a small continuos arc. when my pearl reactive(Sling Blade) becomes to skid snap on med. I use this ball.

I'm sure you could take any solid reactive with a mid lane/ backend and drill it 5.5" pin to pap and 105 deg.

you might want to get a second ball of one that is working for you and drill it like this to tame the backend down. just try and get a light top wt. so you won't need hole.
--------------------
"deserves got nothing to do with it."
-- William Munny
Logged
"deserves got nothing to do with it."
-- William Munny

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4357
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #3 on: August 04, 2003, 02:37:49 PM »
It is going to be difficult to get a ball to roll smoothly on very clean, dry backends.  I think your best bet is to go with something urethane.  Anything resin is going to be snappy when the backends are dry.  If you are looking for smooth, go to something urethane.  It will not be too straight like a plastic, but not be snappy like a resin.  I would recommend a Blue Urethane Groove.
--------------------
If anyone out there is worried about the scores being too high, try duckpin!!
Logged
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

dw23

  • Hero Member
  • *****
  • Posts: 986
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #4 on: August 04, 2003, 08:17:26 PM »
What about a dull reactive. I know they are powerful but I'm looking at a decent about of oil for 38ft and clean backends. One guy did really well with an X-Factor Deuce. It seemed to blend the wet and dry together before rolling into the pocket.
DW
Logged
Deven Walls

Pro Shop Staff Member
Lord Field/Lane Masters
www.lordfield.com and www.lane-masters.com
"Changing Bowling, One Bowler At A Time"

Cheez Wiz

  • Jr. Member
  • **
  • Posts: 95
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #5 on: August 04, 2003, 10:03:18 PM »
Depending on how I want to play either my old blue nitro, or my pearl urethane claw...Both are smooth as silk on dry backends.
--------------------
It's not Ez bein' Cheezy
Logged

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4357
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #6 on: August 05, 2003, 01:09:28 AM »
Okay.  But, most guys will not find a Blue Nitro or Black Messenger. Another alternative to the Urethane Groove, is maybe a Urethane Scout.  Urethane is definitely the right way to go.
--------------------
If anyone out there is worried about the scores being too high, try duckpin!!
Logged
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #7 on: August 05, 2003, 08:48:02 AM »
Ebonite V2 Pearl, 3" PIN, and PIN under ring finger and CG kicked out 1 1/2" to 2". Gives good midlane roll and this in turn keeps ball from snapping when it hits the dry, yet the back end is very angular and smooth with no over/under.
Logged
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4357
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #8 on: August 05, 2003, 09:32:46 AM »
dw23,

At most, you could probably get away with a Savage or V2 solid drilling the pin 2 inches from your axis point.  But, STAY AWAY FROM PEARLS!!!  They store energy for backend movement.  That is what pearls are designed for.  The only pearl I would go with, is a Urethane Scout or Urethane Groove.  You need to get a ball with a medium-high to high rg with a low diff.  Also......look into the V2 Dry.  I heard this is the ball for dry lanes.  Who disagrees??
--------------------
If anyone out there is worried about the scores being too high, try duckpin!!
Logged
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

Goof1073

  • Hero Member
  • *****
  • Posts: 2433
Re: Smoothest Rolling Ball for Dry Back Ends
« Reply #9 on: August 05, 2003, 11:53:17 AM »
Tour Power...this ball smooths out the transition VERY WELL!!  Just hunt around Ebay for one.
Logged
Pages: [1]
« previous next »