BallReviews

Equipment Boards => MoRich => Topic started by: playergf on January 28, 2008, 03:20:18 PM

Title: Balance hole on Shock & Awe
Post by: playergf on January 28, 2008, 03:20:18 PM

On a Shock & Awe drilled for sharp breakpoint for a high tracker where should the balance hole be placed? Thanks for your help!

Title: Re: Balance hole on Shock & Awe
Post by: NicholasE on January 29, 2008, 12:10:02 AM

Sometimes you don't get to choose. It depends on if you have to have the hole there to get rid of excess weight to make the ball statically legal.
--------------------
MoRich bowling - Better take some Viagra, you don't want to go soft throwing a MoRich!

http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5

Title: Re: Balance hole on Shock & Awe
Post by: 86camaroman on January 29, 2008, 12:20:53 PM

A balance hole means the ball is over. So the balance hole will need to be wherever it falls to take out the excess weight to make it legal. There are also things like flare increasing holes or flare decreasing holes Those are used to make more flare or less flare.

Title: Re: Balance hole on Shock & Awe
Post by: rengawB on January 29, 2008, 02:07:02 PM

^^^ WTF ^^^

There is one other type of hole and you get the nomination!!
--------------------
Don't sing it, bring it!!

Title: Re: Balance hole on Shock & Awe
Post by: playergf on January 29, 2008, 11:12:38 PM

Thanks for the replies. It was mentioned on the drill sheet but I seem to have misplaced it.

Title: Re: Balance hole on Shock & Awe
Post by: rustylegacy on January 30, 2008, 09:56:47 AM

I dont know if its the same, but the Levrg says run a line from grip center through cg to VAL, put the hole on the VAL where it meets.