BallReviews

Equipment Boards => MoRich => Topic started by: ShoreLefty on January 05, 2006, 04:05:47 AM

Title: Drilling Question
Post by: ShoreLefty on January 05, 2006, 04:05:47 AM
Some time ago I saw a drilling on here with the pin on the VAL or at least very close, and the MB on the VAL as well.  I believe one pic was of one of Danny Wisemans Ravages.  If anyone knows where I can find that please let me know and more importantly what kind of reaction they had if they had a ball drilled this way.

Thanks
Title: Re: Drilling Question
Post by: Doug Sterner on January 05, 2006, 12:09:53 PM
I think Hammer used to have that drilling on their drill sheet back in the 3-D Offset days....

should be good for a wet/dry shot as I doubt if teh ball would overreact off the oil.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY
http://dougsproshop@aol.com
www.dougsproshop.net
Feel the Power of the FOS with new Enriched Uranium from Lane 1!!
Title: Re: Drilling Question
Post by: C-G ProShop-Carl on January 05, 2006, 12:40:23 PM
Sounds to me like you are refering to the Asymmetrical Flip drilling.
Title: Re: Drilling Question
Post by: Jeffrevs on January 05, 2006, 12:48:57 PM
quote:
Sounds to me like you are refering to the Asymmetrical Flip drilling.


Negative....nothings close to val on an asym flip drill...none that I'm aware of at least

It's a strange drill that Mo or one of his cohorts put on Danny's (one of Danny's) Ravages .....Nollster has that ball.....message him....
--------------------
JEFF
"A Mayhem and a couple of Hercs.......uhm.....Nice!.."
Title: Re: Drilling Question
Post by: DP3 on January 05, 2006, 01:06:22 PM
I have a friend that has that drill in a few assymetricals(namely a Total Annihilation).

Essentially it's like a 3 1/2 pin X 3 1/4 MB to PAP drill.  It flares a ton(and clips the weighthole thats on the VAL), but boy is it smooth.  For those not afraid to clip a hole and want something to experiment with it could work wonders in short or extreme wet/dry situations.
--------------------
-DP3
Respect the Game
Title: Re: Drilling Question
Post by: Strapper_Squared on January 05, 2006, 01:13:01 PM
yeah, that's what I would expect from that type of layout... lots of revs, but smooth.  I could envision the ball flaring backwards if you missed your release a bit (which might cause the pin to be past the VAL)... which would surely clip the holes...

S^2
--------------------
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-Strapper Squared

Alias Generator (http://"http://gorillamask.net/ronmexico/")
Title: Re: Drilling Question
Post by: Jeffrevs on January 06, 2006, 07:50:47 AM
quote:
My guess is Danny came up with it himself....
--------------------
Precision


now that you mention that.......it was a drill that Danny used to use a while back, I remember Nollster posting the email from Danny himself...it's pretty cool...I'll see if Nollster can chime in!
--------------------
JEFF
"A Mayhem and a couple of Hercs.......uhm.....Nice!.."
Title: Re: Drilling Question
Post by: Nollster on January 06, 2006, 08:11:39 AM
I did indeed buy Danny's Ravage with the drilling described.

Ravage (click for pic) (http://"http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTA4NjM3NzZzNDEzZGZkMzF5NTQx.jpg")

This is the 2nd ball I've purchased from him and I have to say he is the coolest!!  He takes the time to responsd to every e-mail I've sent -- something I really didn't expect......
Here is the context of his message to me about the ball:
quote:

That  may  have  5-10  gms  on  it.  They  said  not  to  drill them  this  way. I  had  to..........I  used  to  do  symetrical balls  similar  so.
It  flared  a lot  but  rolled  heavy  in  the  mid lane.  If  the  backs  are  ripping  its  good for  hook  stop  and if  they are tight  it  should  continue.  I  wanted  to  see  so  I  have it  in  the  back  of  my  mind  if  I  ever  needed  to  do  something  off the  hook.  Its  like  putting the  pin  in  the  thumb hole.....oh  u  cant  do  that--Yes  I  did  !


--------------------

Nollster

Summer league (http://"http://www.allbowling.com/journal/public.php?uid=419&leagueid=13")
Winter League (http://"http://www.allbowling.com/journal/public.php?uid=419&leagueid=277")
Title: Re: Drilling Question
Post by: Jeffrevs on January 06, 2006, 08:21:39 AM
Thanks Nollster......wow I just love it when I'm right ! LOL
--------------------
JEFF
"A Mayhem and a couple of Hercs.......uhm.....Nice!.."
Title: Re: Drilling Question
Post by: DP3 on January 06, 2006, 10:35:10 AM
Remember, Danny is quite the drilling guru himself.  One of the great "Professional Drillers" on tour.  He's only been drilling for about 25 years.
--------------------
-DP3
Respect the Game
Title: Re: Drilling Question
Post by: Strapper_Squared on January 06, 2006, 10:56:08 AM
Wasn't Danny responsible for the infamous 315 degree layout too?  He's not afraid to try stuff out... lol

S^2
--------------------
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-Strapper Squared

Alias Generator (http://"http://gorillamask.net/ronmexico/")