BallReviews

Equipment Boards => MoRich => Topic started by: dizzyfugu on August 05, 2007, 06:43:23 PM

Title: Morich/Brunswick Mexico production quality issue
Post by: dizzyfugu on August 05, 2007, 06:43:23 PM: I am posting this here since it is about Brunswick as ball manufacturer. I just got my Awesome Finish a couple of days ago (from the Mexico plant), and the surface got me worried and I'd like to know if others have this phenomenon with other Brunswick balls in the last couple of weeks/months (say, since April).

My AFi came with pretty looks, even surface, but the engravings - very large on Morich equipment - and their filler material noticeably protruded from the surface. I did not pay much attention to it at first, since I know this phenomenon from resurfacing at home on the spinner. But after first ball tests on oilier shots I found the ball to be very inconsistent at the break point, and I blame it on the lack of traction due to the (too) thick OOB engravings which are so large that they are always in the track area.

I started "shaving" them back manually and gave the ball a light resurfacing to even the surface out (green pad, then 1.500 grit pad and finally polish, all 4-sided). Doing so, I also found air bubbles in the coverstock material right under the original surface - Small in size, only cosmetical, but I never had this on any ball before?

Somehow I have the feeling that Brunswick's production quality is on the decline.

Take this post as a minor rant, but I'd like to know if others have similar recent experience?
--------------------
DizzyFugu (http://"http://www.putfile.com/dizzyfugu/") - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")
Title: Re: Morich/Brunswick Mexico production quality issue
Post by: the-7-year-itch on August 06, 2007, 09:19:58 AM: Nothing produced in a mexican plant is good quality.
--------------------
Clinton may have stained a dress.......................But Bush has stained a Nation!! Now I know what the W. stands for......Worst!!
Title: Re: Morich/Brunswick Mexico production quality issue
Post by: mainzer on August 06, 2007, 01:25:35 PM: quote:
Nothing produced in a mexican plant is good quality.
--------------------
Clinton may have stained a dress.......................But Bush has stained a Nation!! Now I know what the W. stands for......Worst!!

EXCEPT MORICH!
--------------------
Mainzerpower
Title: Re: Morich/Brunswick Mexico production quality issue
Post by: the-7-year-itch on August 06, 2007, 02:34:52 PM: That is all I use and have never had any issues.
--------------------
Clinton may have stained a dress.......................But Bush has stained a Nation!! Now I know what the W. stands for......Worst!!
Title: Re: Morich/Brunswick Mexico production quality issue
Post by: BowlinStr8t on August 06, 2007, 03:44:33 PM: Take it back to the pro-shop where you bought it and let them send it back to the distributor. Personally, I haven't seen what you are talking about and I have seen over 40 of the Awe. Fin. Might just be a one time situation. Hope this helps.
--------------------
My ball won't hook--Oops, it was my spare ball....
Title: Re: Morich/Brunswick Mexico production quality issue
Post by: dizzyfugu on August 07, 2007, 04:19:10 AM: Thank you all. I also got feedback on this in the Brunswick forum - the protruding engraving filler seems to be a rare but known quality check "defect". I informed my local contacts about it and have the ball resurfaced at home, I hope it will do all right now.
--------------------
DizzyFugu (http://"http://www.putfile.com/dizzyfugu/") - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")