win a ball from Bowling.com

Author Topic: Target weighting  (Read 5340 times)

snowman4951

  • Hero Member
  • *****
  • Posts: 771
Target weighting
« on: March 14, 2005, 04:38:03 PM »
I was talking to someone about the Shock and Awe. They said you need to have it drilled "Target Weighting" technique.What is this?Is this drilling technique just for Morich balls?Thanks!
--------------------
FIRE ON THE LANES,ICE IN THE VEINS!!!!

 

track-atl

  • Jr. Member
  • **
  • Posts: 47
Re: Target weighting
« Reply #16 on: March 16, 2005, 07:45:57 AM »
my understanding is that target weighting a ball removes side weight and top weight at the same ratios.Mo has a certain targeted(for example target -1/4)this is based on rev rate,tilt, and ball speed.The other option you have is the pitch the weight hole which will add more flare.I have seen in my shop as i keep making the hole bigger it increases the ball reaction.You can target weight any ball.Here is another idea in symetrical ball if put the weight hole down by the thumb and target weight it you can increase the spin time  on a determinator.You can call Freddie at MORICH and can give alot more deatils about target weighting.

PS guys there is a chart that mo has on his cd that tells you how many inches from the center of grip to put the hole.

tgs300

  • Sr. Member
  • ****
  • Posts: 458
Re: Target weighting
« Reply #17 on: March 16, 2005, 08:10:58 AM »
I'd like it also, thanks.

scott.tantlinger@gmail.com

snowman4951

  • Hero Member
  • *****
  • Posts: 771
Re: Target weighting
« Reply #18 on: March 16, 2005, 11:17:56 PM »
anyway to download the cd?
--------------------
FIRE ON THE LANES,ICE IN THE VEINS!!!!

AllAirForceTwice

  • Sr. Member
  • ****
  • Posts: 461
Re: Target weighting
« Reply #19 on: March 17, 2005, 07:11:47 AM »
Please send to bowlingicon@hotmail.com

Thanks!
--------------------
Capt Dave Ingraham
2004 Air Force Team
Ex-Dynothane Military Staffer
CEO, Bowling with Sarcasm Fan Club

"Don't move... the lanes will come to you."

Dave Ingraham, Major, USAF (Ret)

chuck

  • Jr. Member
  • **
  • Posts: 93
Re: Target weighting
« Reply #20 on: March 17, 2005, 07:19:19 AM »

 Send it to me  at
 
  scbowler300@aol.com

laufaye

  • Hero Member
  • *****
  • Posts: 1602
Re: Target weighting
« Reply #21 on: March 17, 2005, 10:58:55 AM »
Please send me an email too, greatly appreciated.

http://nlau@dc.rr.com
--------------------
Laufaye

ShoreLefty

  • Full Member
  • ***
  • Posts: 181
Re: Target weighting
« Reply #22 on: March 17, 2005, 11:09:34 AM »
Me too.

swolf@goeaston.net

snowman4951

  • Hero Member
  • *****
  • Posts: 771
Re: Target weighting
« Reply #23 on: March 17, 2005, 07:31:39 PM »
Does anyone know how to get the cd about the Target weighting?The 2004 WMB cd rom doesn't have it in there.
--------------------
FIRE ON THE LANES,ICE IN THE VEINS!!!!

O-Zone

  • Full Member
  • ***
  • Posts: 112
Re: Target weighting
« Reply #24 on: March 17, 2005, 08:16:14 PM »
I'm interested as well.

jeffrey.voght@pba.com

Thanks in advance!
--------------------
Jeff Voght
PBA Eastern Region Member

waynej2000

  • Jr. Member
  • **
  • Posts: 16
Re: Target weighting
« Reply #25 on: March 17, 2005, 08:22:22 PM »
Please send me the info as well.

Much appreciated

Thank you,

Waynej2000@hotmail.com
--------------------
Wayne
Wayne

Pupubowlingcho

  • Jr. Member
  • **
  • Posts: 70
Re: Target weighting
« Reply #26 on: March 17, 2005, 09:05:55 PM »
wow_hsin@yahoo.com.tw

Thanks

Jeffrevs

  • Hero Member
  • *****
  • Posts: 11890
Re: Target weighting
« Reply #27 on: March 18, 2005, 09:44:04 AM »
I may be wrong but....(see profile) ...my Animal has a large target hole for midlane read...it's big...and angled out....it does help/work!
--------------------
JEFF
"Oh...that's puce"
 Sully; Monsters, Inc.


Keith Frye

  • Hero Member
  • *****
  • Posts: 571
Re: Target weighting
« Reply #28 on: March 18, 2005, 10:00:15 AM »
Precision,

Are finger/thumb weight taken into consideration?  If there is an excess amount of either, drilling the hole straight across from center-of-grip would not help bring it back to legal.

Thanks in advance for your response.

Turbo

  • Jr. Member
  • **
  • Posts: 30
Re: Target weighting
« Reply #29 on: March 19, 2005, 07:57:35 PM »
quote:
....Without getting into detail about the theory behind "target weighing" the formula used to determine hole location after the ball has been drilled is as follows:


Why do we need to know how to do "target weighing" if we don't know the theory behind it?  We need to understand what this is supposed to accomplish in order to make an intelligent decision as to it's favorable use as a ball setup option.


Next Level PS

  • Hero Member
  • *****
  • Posts: 1874
Re: Target weighting
« Reply #30 on: March 21, 2005, 11:29:41 PM »
MoRich Core Tech Members Only - Balance Hole Placement Chart (Updated Nov 13th)
The most effective placement for a balance hole requires removal of either top or bottom weight with respect to side weight in a correct ratio. Once located, use the proper size hole to remove the amount of desired weight.  Note -- Enlarging the diameter of the hole will decrease spin time!

Top Weight Chart    Bottom Weight Chart

Top Weight Chart

  Top Weight of Drilled Ball
 
  2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00
Side Weight of Drilled Ball
  3.00 3.00 3.00 3.00 3.25 3.25 3.50 3.50 3.50 3.75 4.00 4.00
 2.75 2.75 3.00 3.00 3.00 3.25 3.25 3.50 3.50 3.50 3.75 4.00
 2.50 2.75 2.75 2.75 3.00 3.00 3.25 3.25 3.50 3.50 3.75 3.75
 2.25 2.50 2.50 2.75 2.75 3.00 3.00 3.00 3.25 3.50 3.50 3.75
 2.00 2.50 2.50 2.50 2.75 2.75 3.00 3.00 3.00 3.25 3.50 3.50
 1.75 2.25 2.25 2.50 2.50 2.50 2.75 2.75 3.00 3.00 3.25 3.50
 1.50 2.00 2.25 2.25 2.25 2.50 2.50 2.75 2.75 3.00 3.00 3.25
 1.25 2.00 2.00 2.00 2.25 2.25 2.25 2.50 2.50 2.75 2.75 3.00
 1.00 1.75 1.75 2.00 2.00 2.00 2.25 2.25 2.25 2.50 2.50 2.75
 0.75 1.50 1.50 1.75 1.75 1.75 2.00 2.00 2.25 2.25 2.50 2.50
 0.50 1.25 1.50 1.50 1.50 1.50 1.75 1.75 2.00 2.00 2.00 2.25
 0.25 1.25 1.00 1.25 1.25 1.25 1.50 1.50 1.50 1.75 1.75 2.00
 0.00 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.50 1.50
-0.25 0.50 0.50 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.25
-0.50 0.25 0.25 0.25 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50
  Distance from Center of Grip in Inches
 

Return to Core Tech Menu Page Top of Page

Bottom Weight Chart

  Bottom Weight of Drilled Ball
 
  -0.25 -0.50 -0.75 -1.00 -1.25 -1.50 -1.75 -2.00 -2.25
Side Weight of Drilled Ball
  3.00 4.25 4.50 4.50 4.75 5.00 5.25 5.50 6.00 6.25
 2.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 6.00 6.25
 2.50 4.00 4.25 4.25 4.50 5.00 5.00 5.50 6.00 6.25
 2.25 4.00 4.00 4.25 4.50 4.75 5.00 5.50 5.75 6.25
 2.00 3.75 4.00 4.25 4.25 4.75 5.00 5.25 5.75 6.25
 1.75 3.50 3.75 4.00 4.25 4.50 4.75 5.25 5.50 6.00
 1.50 3.50 350 3.75 4.00 4.25 4.75 5.00 5.50 6.00
 1.25 3.25 3.50 3.50 3.75 4.25 4.50 5.00 5.50 6.00
 1.00 3.00 3.25 3.50 3.75 4.00 4.25 4.75 5.25 6.00
 0.75 2.75 3.00 3.00 3.50 3.75 4.00 4.50 5.00 5.75
 0.50 2.50 2.50 2.75 3.00 3.50 3.75 4.25 4.75 5.50
 0.25 2.00 2.25 2.50 2.75 3.00 3.50 4.00 4.50 5.50
 0.00 1.75 2.00 2.00 2.25 2.50 3.00 3.50 4.00 5.00
-0.25 1.25 1.50 1.50 1.75 2.00 2.25 2.75 3.50 4.50
-0.50 0.75 0.75 0.75 1.00 1.00 1.25 1.50 2.25 3.50
  Distance from Center of Grip in Inches

I guess I have to be the jackass
 


--------------------
www.bowlritelanes.com
www.nextlevelproshop.com

Next Level Proshop
Union, NJ

"THE BOWLERS WILL NOT BE DENIED"

www.lovedoublesonline.com