win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: Extracting oil from Motiv bowling balls  (Read 13456 times)

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Extracting oil from Motiv bowling balls
« on: March 03, 2015, 10:42:07 PM »
I have a NuBall rejuvenator and I love it. I've used it before with my Brunswick Wicked Siege and with my Paranormal Aura with great success. The balls are sweating oil after an hour at 125F. Sometimes I even have to leave them for an extra hour untiel they stop sweating oil. Completely different story with my Motiv equipment. I used it with my Jackal, NO OIL, used it with my Shock, nothing, used with my Sigma Sting and NADA, NONE, ZERO! Is it just me or someone else is having the same experience? Do I have to use a different temperature? More time maybe? Where is the oil? Lol  ;D
« Last Edit: March 19, 2015, 12:47:40 PM by L3nn0n »
Logged

 

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: Extracting oil from Motiv bowling balls
« Reply #1 on: March 03, 2015, 10:46:36 PM »
Beats me, I have yet to get oil out of mine either. There is a slight smell of oil sometimes, but never oil on the surface like I usually see with other stuff. It does seem to help restore the performance though.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Re: Extracting oil from Motiv bowling balls
« Reply #2 on: March 03, 2015, 11:06:42 PM »
Quote from: milorafferty on March 03, 2015, 10:46:36 PM
Beats me, I have yet to get oil out of mine either. There is a slight smell of oil sometimes, but never oil on the surface like I usually see with other stuff. It does seem to help restore the performance though.

I know, right??? It smells like the typical Motiv smell (which I love lol) and sometimes a slight oil smell too, but I can't see any oil on the surface! My guess is that after the first full surface of one of the balls I will see a lot of oil coming off the ball, but again, I'm just guessing... Have you tried doing that?
Logged

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: Extracting oil from Motiv bowling balls
« Reply #3 on: March 03, 2015, 11:11:53 PM »
Quote from: L3nn0n on March 03, 2015, 11:06:42 PM
Quote from: milorafferty on March 03, 2015, 10:46:36 PM
Beats me, I have yet to get oil out of mine either. There is a slight smell of oil sometimes, but never oil on the surface like I usually see with other stuff. It does seem to help restore the performance though.

I know, right??? It smells like the typical Motiv smell (which I love lol) and sometimes a slight oil smell too, but I can't see any oil on the surface! My guess is that after the first full surface of one of the balls I will see a lot of oil coming off the ball, but again, I'm just guessing... Have you tried doing that?

That doesn't seem to do it either. My primary Sting has probably 200 games. I've resurfaced it and cycled it through my ball oven a couple of times but never seen any visible oil. It does gain back the down lane pop after its done though.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: Extracting oil from Motiv bowling balls
« Reply #4 on: March 03, 2015, 11:13:16 PM »
And it's the same with my Tribal. A ton of games but has not shown oil yet.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

vkowalski1970

  • Hero Member
  • *****
  • Posts: 1431
  • "It is what it is"
Re: Extracting oil from Motiv bowling balls
« Reply #5 on: March 03, 2015, 11:22:54 PM »
Have you taken surface down before you put into revivor? I know when I do hot watter baths, I take to 500 then the oil pours out..
Logged
Scandal
Daredevil Trick
IQ Tour Solid
Lights Out
Hustle Ink
Viral Hybrid

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Re: Extracting oil from Motiv bowling balls
« Reply #6 on: March 03, 2015, 11:23:59 PM »
Quote from: milorafferty on March 03, 2015, 11:11:53 PM
That doesn't seem to do it either. My primary Sting has probably 200 games. I've resurfaced it and cycled it through my ball oven a couple of times but never seen any visible oil. It does gain back the down lane pop after its done though.

Damn... It puzzles me, where is the oil going? But at least is good yo know that it works and the ball gets back its original reaction. And is good to know that I am not the only one experiencing this!
Logged

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Re: Extracting oil from Motiv bowling balls
« Reply #7 on: March 03, 2015, 11:25:47 PM »
Quote from: vkowalski1970 on March 03, 2015, 11:22:54 PM
Have you taken surface down before you put into revivor? I know when I do hot watter baths, I take to 500 then the oil pours out..

No Vince, I haven't, but I think I'm gonna try that the next time I put them into the oven. That happened to my Paranormal. After a full resurface the ball was sweating oil for three cycles!
Logged

vkowalski1970

  • Hero Member
  • *****
  • Posts: 1431
  • "It is what it is"
Re: Extracting oil from Motiv bowling balls
« Reply #8 on: March 03, 2015, 11:28:38 PM »
if you dont have a spinner, invest in one......best purchase ive made
Logged
Scandal
Daredevil Trick
IQ Tour Solid
Lights Out
Hustle Ink
Viral Hybrid

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Re: Extracting oil from Motiv bowling balls
« Reply #9 on: March 03, 2015, 11:30:36 PM »
Quote from: vkowalski1970 on March 03, 2015, 11:28:38 PM
if you dont have a spinner, invest in one......best purchase ive made

I'm seriously thinking about it. My coach also suggested me this:

http://www.bowlingindex.com/store/merchant.mvc?Screen=PROD&Store_Code=BI&Category_Code=P&Product_Code=PS-805SM

And I can plug it to an electric driller to make it a spinner. What do you think?
Logged

vkowalski1970

  • Hero Member
  • *****
  • Posts: 1431
  • "It is what it is"
Re: Extracting oil from Motiv bowling balls
« Reply #10 on: March 03, 2015, 11:33:05 PM »
I saw that thing.....i think it would be fine for polish but for sanding it scared me...I have a vertex 1/2 hp spinner....3 years now and its great. its exoensive at first, spinner, pads, polishes....but then after the initial investment its not so bad....i buy $20 in pads every few months and am only on my 2nd bottle of snake oil polish in 2 years
Logged
Scandal
Daredevil Trick
IQ Tour Solid
Lights Out
Hustle Ink
Viral Hybrid

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Re: Extracting oil from Motiv bowling balls
« Reply #11 on: March 03, 2015, 11:40:30 PM »
Quote from: vkowalski1970 on March 03, 2015, 11:33:05 PM
I saw that thing.....i think it would be fine for polish but for sanding it scared me...I have a vertex 1/2 hp spinner....3 years now and its great. its exoensive at first, spinner, pads, polishes....but then after the initial investment its not so bad....i buy $20 in pads every few months and am only on my 2nd bottle of snake oil polish in 2 years

Yeah, is a little expensive... The same happened to me when I got the NuBall, but now I feel is worth it. How much you paid for your spinner? About 200, 300? The other thing that scares me is that I don't know how to use it  ;D
Logged

vkowalski1970

  • Hero Member
  • *****
  • Posts: 1431
  • "It is what it is"
Re: Extracting oil from Motiv bowling balls
« Reply #12 on: March 03, 2015, 11:46:19 PM »
I think I paid like $219 shipped.....then I bought a package from Valentinos bowling with cleaner, polish....that was like $35...and i bought 20 abralon pads from ebay for$60.
« Last Edit: March 03, 2015, 11:52:05 PM by vkowalski1970 »
Logged
Scandal
Daredevil Trick
IQ Tour Solid
Lights Out
Hustle Ink
Viral Hybrid

TDC57

  • Hero Member
  • *****
  • Posts: 1273
Re: Extracting oil from Motiv bowling balls
« Reply #13 on: March 03, 2015, 11:48:57 PM »
My Primal Rage and Tribal don't bleed oil when I heat them up either. They must have a very slow absorption rate. 
Logged

L3nn0n

  • Sr. Member
  • ****
  • Posts: 415
Re: Extracting oil from Motiv bowling balls
« Reply #14 on: March 04, 2015, 12:17:35 AM »
Quote from: vkowalski1970 on March 03, 2015, 11:46:19 PM
I think I paid like $219 shipped.....then I bought a package from Valentinos bowling with cleaner, polish....that was like $35...and i bought 20 abralon pads from ebay for$60.

Not bad! Now I have to convince my wife lol but seriously I am thinking about getting one, hopefully will do it soon!

Quote from: TDC57 on March 03, 2015, 11:48:57 PM
My Primal Rage and Tribal don't bleed oil when I heat them up either. They must have a very slow absorption rate. 

I never experienced something like it with any other brand, but now I am sure I am not the only one lol
Logged
Pages: [1] 2
« previous next »