win a ball from Bowling.com

Author Topic: Buddies service not up to par this time.  (Read 1669 times)

Bowljr300

  • Full Member
  • ***
  • Posts: 115
Buddies service not up to par this time.
« on: February 07, 2008, 09:19:09 AM »
I ordered a 16# Levrg with pin 3-4 inches.  Ball arrived quickly but the specs were not quite as close as I had hoped.  It was a little disappointing to find the mass bias so far off line.  The best position for the mass bias would be in line with the pin and cg.  This one was almost three inches right of the line drawn from pin through cg to mass bias.  Additionally, the pin is more than 4 3/4 inches from the cg.  This is too far for how I had intended to drill the ball.

I'm disappointed with this purchase.


 

Bowljr300

  • Full Member
  • ***
  • Posts: 115
Re: Buddies service not up to par this time.
« Reply #1 on: February 07, 2008, 05:42:46 PM »
Both pin and mass bias were not what I had requested.  If that was all they had, I would have preferred an email to an inaccurate shipment.  This ball is going to be a challenge to drill the way I wanted.

Bowljr300

  • Full Member
  • ***
  • Posts: 115
Re: Buddies service not up to par this time.
« Reply #2 on: February 07, 2008, 05:52:21 PM »
I understand that the mass bias is 6 3/4 inches from the pin.  I also understand that the cg has little to no influence on the ball.  Since I wanted the mass bias under my thumb, I now have a cg left of my grip line, so it requires an extra hole.  That isn't what I wanted.

solid9

  • Hero Member
  • *****
  • Posts: 599
Re: Buddies service not up to par this time.
« Reply #3 on: February 07, 2008, 05:59:19 PM »

 Have you talked to Buddies about this ball ?

hotshot187

  • Sr. Member
  • ****
  • Posts: 386
Re: Buddies service not up to par this time.
« Reply #4 on: February 07, 2008, 06:19:30 PM »
Buddies will exchange it.  Just contact bill about it.

Doug

applegam

  • Sr. Member
  • ****
  • Posts: 406
Re: Buddies service not up to par this time.
« Reply #5 on: February 07, 2008, 06:21:52 PM »
My question would be, what did the box say?   If the box said 3-4 inches, then I would say it's not their fault. It's a little un-realistic to expect them to open every box and inpect the ball to make sure it matches the label.   And as far as the mass bias off line?  Why is that their fault?  They didn't make the ball.  I would just contact them, they are VERY customer focused.

Edited on 2/7/2008 7:22 PM

Bar5003

  • Hero Member
  • *****
  • Posts: 1627
Re: Buddies service not up to par this time.
« Reply #6 on: February 07, 2008, 07:44:38 PM »
I believe bill is out of town right now...but just call/e-mail any of the other guys up there and im sure there is something they can do for you...as others have said, buddies is a very customer driven pro shop and will go that extra mile for all...
--------------------
~Britton~

Owner and Operator of

www.videoballreviews.com

VISE inserts The OFFICAL grip of videoballreviews.com

www.viseinserts.com

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Buddies service not up to par this time.
« Reply #7 on: February 07, 2008, 10:18:49 PM »
quote:
I understand that the mass bias is 6 3/4 inches from the pin.  I also understand that the cg has little to no influence on the ball.  Since I wanted the mass bias under my thumb, I now have a cg left of my grip line, so it requires an extra hole.  That isn't what I wanted.


Read what everybody else said here about this. Then call Buddies instead of posting here. Bet you dollars to doughnuts they can make you happy. Whether you deserve to be or not is another question entirely!

(If I were them, the way you whined here, I'd be very annoyed with your behavior. Whether it's what you wanted or not, if the box said 3-4" pin, then that ball is exactly what you ordered. No one checks every ball inside the box and measures it before sending it to the buyer. The CG does not have to be in line with the pin and the Mass bias. Unless you specifically ask for that, no one or darned few will check that either.)
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ
"None are so blind as those who will not see."

crankncrash

  • Hero Member
  • *****
  • Posts: 967
Re: Buddies service not up to par this time.
« Reply #8 on: February 07, 2008, 10:26:36 PM »
What all this comes down to is being a douche, boo I don't want to call them so I will bash on the internet.. O I don't want an x hole.. boo hoo... I ordered a ball from the net, site unseen, instead of going to a proshop and paying for what I get, now i'm pissy it didn't work right.. CRY ME A FREAKING RIVER, then please drown in it.

BuddiesProShopcom-Chris

  • Full Member
  • ***
  • Posts: 200
Re: Buddies service not up to par this time.
« Reply #9 on: February 08, 2008, 12:31:59 AM »
Hello Bowljr

I am currently out of town and just read this post. Thru trial and error I have found your order. Chad will be in contact with you on Friday so this can be fixed ASAP.

We appologize for any inconvenience and want you and everyone who buys from us to be happy.

Thank you
Chris
BuddiesProShop.com
--------------------
Chris
http://BuddiesProShop.com

Joeyd

  • Hero Member
  • *****
  • Posts: 808
Re: Buddies service not up to par this time.
« Reply #10 on: February 08, 2008, 08:13:04 AM »
quote:
Hello Bowljr

I am currently out of town and just read this post. Thru trial and error I have found your order. Chad will be in contact with you on Friday so this can be fixed ASAP.

We appologize for any inconvenience and want you and everyone who buys from us to be happy.

Thank you
Chris
BuddiesProShop.com
--------------------
Chris
http://BuddiesProShop.com


Not for nothin, but when Chris says he's "out of town" he's way out of town too. He's not around the corner, he's on the other side of the country bowling. Yet he still took a minute to answer your message.. If there's any question as to whether or not Buddies is customer focused, it was just answered.
--------------------
Joeyd
Shop www.buddiesproshop.com
http://joeyd.bowlspace.com
AIM - JoeydfromNB11
Joeyd
#TeamStrikeFX #TeamBrunswick
#LetsDoThatBowling
www.twitter.com/truejoeynereu
www.facebook.com/letsdothatbowling