win a ball from Bowling.com

Author Topic: Nomad Pearl  (Read 23508 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Nomad Pearl
« on: December 31, 1969, 06:00:00 PM »
- Coverstock: Ultra Vision Pearl Reactive
- Weight Block: Rotary Core
- Ball Color: Royal Blue / Silver
- Ball Finish: 1500 Polished
- Flare Potential: 5+ inches (Med-High)
- RG: 16#-2.52, 15#-2.55, 14#-2.57, 13#-2.66, 12#-2.66
- RG Differential: 16#-0.049, 15#-0.054, 14#-0.046, 13#-0.037, 12#-0.037
- Description: The Nomad pearl features the performance proven Rotary core found in the highly successful Silver Streak Line of bowling balls. This mid-rg and higher differential weight block was one of the best sellers ever from Roto Grip. The unique shape combined with the best coverstock technology of the time was elemental to that success. Fast forward to 2009, we have taken this performance proven core and added a new coverstock to these balls. The Ultra Visionâ„¢ coverstock is bred from the original Sure Grip coverstock, but with friction enhancing additives that have given us great success with some of our other coverstock blends like the original Cytoplasmic, Cytoplasmic Xâ„¢, and the recent Cytoplasmic XLâ„¢. This combination of enhanced friction and performance proven core technology is sure to please. This will be the most highly sought after weapon of choice.

 

ajensen

  • Jr. Member
  • **
  • Posts: 91
Re: Nomad Pearl
« Reply #31 on: September 26, 2009, 06:10:18 PM »
This last monday I shot league up at Mockingbird Lanes off of 96th and Q in Omaha Nebraska. They have Brunswick Pro Anvil synthetics. I used my Pearl Nomad w/ pin up 5x3,with a hole.The length of the pattern is 41 feet. I scuffed the Pearl Nomad with a 2000 grit abr. I did so for two reasons. One the lanes are a little oily and two I wanted the ball to read the lane sooner and smoother yet. I do throw the ball at about medium to above medium speed and put alot of hand in the ball.
The ball rolled very smooth and still had it's continuos roll through the pocket. I shot 230,215 and a 215 to shoot 660.
Whether you need your ball to skid or grab, keep in mind you can always alter the surface of your ball.
--------------------
(AJ) Andrew Jensen
 Roto Grip Staffer
Andrew Jensen
BowlersMart Cherry Valley
Track Bowling Elite Regional Staff

KENOMAN

  • Jr. Member
  • **
  • Posts: 28
Re: Nomad Pearl
« Reply #32 on: October 08, 2009, 03:05:29 PM »
I drilled my Nomad Pearl 5X3 with the pin 1" right of the fingers and the cg 1/2" right of the center of my span. This is the first ball out of the bag. On a normal house shot the ball gets through the heads nicely but saves a lot of energy for the back end and gives great angles into the pocket.
Everything seems to work together, the medium rg gives you length without too much skid. The pearlized shell gives you a little extra length before the great backend reaction from the old silver streak weight block.
The angularity of this ball makes it very effective in around the third or forth arrow. The ball also reads friction well and can turn the corner.
--------------------
KEN TAYLOR SR
AMATEUR STAFF
ATLANTA GA

rrbowler

  • Jr. Member
  • **
  • Posts: 14
Re: Nomad Pearl
« Reply #33 on: October 09, 2009, 04:11:03 PM »
I drilled two pearls the first i drilled pin below the fingers this one gets down thye lane very easily and recovery is very predictable. the second one I drilled  i drilled  4 X 3 3/8 this one gets down the lane great but with my slow ball speed (due to injury) cant control the backend.Hopefully will be able to get my ball speed back soon.
--------------------
Rich Mueller
 Roto Grip Staff

IrishMike837

  • Jr. Member
  • **
  • Posts: 15
Re: Nomad Pearl
« Reply #34 on: October 09, 2009, 08:37:06 PM »
Just like the Nomad Solid the thing that I love about this ball is the fact that it has the same core as the Silver Streak, which was one of my favorite balls of all time from Roto Grip.  The Nomad Pearl doesn't disappoint, this ball is absolutely amazing.  One of the great things about this ball is the way it compliments the Nomad Solid.  If you have similar layouts on both the Solid and Pearl then making adjustments to lane breakdowns is very easy.  I tend to start out using my Nomad Solid and when the lanes breakdown I'm able to change to the Nomad Pearl without making any dramatic changes to where I'm playing on the lanes.  

In my experience with this ball it seems to work best on house patterns and short (35-38 feet) PBA/sport patterns.  I don't like to open the lane up too much with my Nomad Pearl because when I play straighter with it I seem to carry virtually everything.  This is an important addition to any serious bowlers arsenal.
--------------------
Mike Keily - Roto Grip Amateur Staff

ROTO GRIP - King Of Them All!

RG is King

  • Jr. Member
  • **
  • Posts: 26
Re: Nomad Pearl
« Reply #35 on: October 10, 2009, 01:55:04 PM »
The Nomad pearl was on a typical house shot 36' in length and buffed to 39' freshly oiled Brunswick synthetic lane surface.  This ball was drilled with the pin above my fingers and the CG 3/4" off of my grip line.  With this ball, I started up the boards and up the back of the ball, using 7th board as my breakpoint.  It looked like I threw it on ice, but then when it got to the midlane it went sideways, and for a pearl it drove through the pins with no deflection.  I bowled several shots playing up the boards and then moved 10 boards left with my feet, moving my eyes in, but still using the 7th board as my breakpoint.  The ball was super clean through the fronts and super strong in the backs.  I used it on some of the shorter Kegel patterns and this ball was as predictable on those as it was on the house pattern.  Thanks to Hank and all of the staff at Roto Grip for producing some of the best equipment.

rotoguy838

  • Jr. Member
  • **
  • Posts: 6
Re: Nomad Pearl
« Reply #36 on: October 14, 2009, 03:03:44 PM »
I have my Nomad Pearl drilled with pin above the ring finger and cg kicked to the right about half an inch.  This ball has amazing backend reaction and really hits hard and carries very well.  The Nomad Pearl really is a great compliment to the Nomad solid.  When the fronts start to hook the Nomad Pearl is still able to get through the fronts and make the recovery down the lane.  For the price of the Nomad and the reaction you get is a great affordable combination for all bowlers.

Roto Grip Amateur Staff

Jimmy Crews

Dino

  • Jr. Member
  • **
  • Posts: 8
Re: Nomad Pearl
« Reply #37 on: November 12, 2009, 08:55:50 AM »
Having already drilled and tested the Nomad I was excited to try out the Pearl version. I just used a label drilling with the pin directly above and between the fingers and box surface. As expected the ball is much cleaner through the fronts and a touch longer than it's solid counterpart. This one really unloads off the dry. Very angular move to the pocket with great hit for a mid priced ball. Last night was my first night out in league with it and I shot 780 right out the box. Fantastic ball in any price category.

Bigmike

  • Hero Member
  • *****
  • Posts: 1073
Re: Nomad Pearl
« Reply #38 on: November 19, 2009, 05:50:40 PM »
See profile for stats.

Lay Out: 5.5" from PAP at 75* PAP angle and 35* VAL angle. The pin ended up above my bridge. I added a 7/8 x 2" deep weight hole on the axis to "spice" it up at the breakpoint a little more

Surface: I have taken it down by spinner to 4000abr.

Purpose: I have a Reign(3000abr) with the pin above the ring finger. This kind of layout is usually a good length/good backend option for me. In contrast the pearl Nomad is pretty smooth off the spot but earlier than my Reign. I am hoping by knocking the shine down and placing a weight hole on the axis, I can give a 2-3 distinct difference and use these in tandem to ball up or down with.

Lane condition observations: I have mainly thrown this on our house pattern both on the fresh and on broken down second shift conditions. This ball with factory polish has no problem getting thru the front of the lane. When I hit it by hand with the 4000abr, it slowed down the push enough to read the mid lane better for me.

Final thoughts: What I am seeing is a ball that will get length with a weaker pin position. If factory shined and on the correct pattern, it will also read the spot very strongly. Players will need to adjust the surface if they are more speed dependant or if they are on a slicker medium pattern. When the pearl Nomad faces the pocket, it a pretty thing to watch as pins go everywhere. All in all, another good release from Roto Grip that works in tandem with a Storm release and isn't an overlap.

--------------------
"Why don''t you call me sometime.....when you have no class" ~~Rodney Dangerfield to Sally Kellerman, his college professor in Back to School ~~1986

Mike Craig - Storm Products Pro Shop staff -Columbus, OH
"Tell me Cup, how does a great ball striker like you shoot an 83? Well I lipped out this putt on 18......"

Mike Craig - Storm Bowling Amateur Staff - Westerville, OH

eta4290

  • Newbie
  • *
  • Posts: 3
Re: Nomad Pearl
« Reply #39 on: December 21, 2009, 12:29:57 AM »
i got this through roto grip who is sponsoring my college bowling team , Wright State . Its drilled up with the pin over my bridge in higher position I havent got to use this ball that  much . But what ive seen so far is that it goes long and has strong backend motion . if you hit friction with this ball to soon is going take off . i want to use this on the chettah or a shorter pattern  and play outside with it .This is great ball on the right condition depending on how you get it driled up. when i get to use this on a shorter pattern ill post another review with more info

cyprus89

  • Newbie
  • *
  • Posts: 4
Re: Nomad Pearl
« Reply #40 on: December 30, 2009, 07:53:44 PM »
How I got the ball was through a drawing that got me a ball, bag, and shoes for free. I was talking to my pro shop pro and he referred to me this ball. At first I was uneasy about it and espically when I first threw it in the couple of games. The games were on carry down oil and I could not keep it on the right side. But when I threw it on fresh oil and no practice I managed to get a 680 with it. Can't wait for league to see how this ball acts when I get to practice with it first.

Bbyblueyes408

  • Newbie
  • *
  • Posts: 4
Re: Nomad Pearl
« Reply #41 on: January 03, 2010, 01:53:33 PM »
As a member of the Wright State bowling club I got this ball through the sponsorship we have with RotoGrip.  I have used this ball numerous times and have been able to score well with it.  This ball has a nice banana shaped hook and works well on medium length patterns.  It doesn't have as much hook on the back end as the Nomad but I find it works very well just the same.  I would recommend this ball for anyone who is looking for a nice smooth hook for medium length oil patterns.

ajensen

  • Jr. Member
  • **
  • Posts: 91
Re: Nomad Pearl
« Reply #42 on: January 05, 2010, 12:04:34 PM »
It feels like I can do no wrong with the Nomad Pearl.
Last night I bowled in league at, Mockingbird Lanes in Omaha NE.I have the drill pattern set up to be smooth while still leaving the backend in play. It is drilled with a 5x3, pin above ring finger cg kicked out with a deep 31/32 bit for a weight hole. It's drilled negative 3/8 side weight. for me it helped tame the backend down a bit.
This ball is the same ball I shot 853 with.
Last night I shot 756. Shooting 267 the first game. Then shooting 244 the next game. Rounding off the night with a 245.
All night long I threw the ball around second arrow out to 5 board. Never moving left of third arrow.
I have still kept the same finish on the Nomad Pearl as I did when I drilled it.
What an awesome ball with an awesome price!
--------------------
(AJ) Andrew Jensen
 Roto Grip Staffer
Andrew Jensen
BowlersMart Cherry Valley
Track Bowling Elite Regional Staff

kbbywsu13

  • Newbie
  • *
  • Posts: 3
Re: Nomad Pearl
« Reply #43 on: January 08, 2010, 11:52:27 AM »
I am a female bowler for Wright State University.  This ball is awesome for medium patterns.  As soon as you find the dry and bump it this ball comes racing back and just crushes the pocket. Good overall reaction. If you're looking for a versatile shiny ball, this would be a great fit.

CB4WrightState

  • Newbie
  • *
  • Posts: 1
Re: Nomad Pearl
« Reply #44 on: January 09, 2010, 12:12:23 PM »
Nomad Pearl- Laid out with 70 degree Pin to GG angle, with 4-5 Pin to PAP distance, and a 45 degree angle to the VAL. The Nomad Pearl really makes its money in the midlane. This ball didn’t create the “kicked left” flip for me it really makes a strong read in the midlane and covers most of its area in the last 20-25 feet. The carry I have experienced has been exceptional since I gave it a light scuffing with a 2k pad. For my style the polish created too much unpredictability on the patterns I see as a bowler for Wright State University (Dayton, Ohio). The ball is very versatile depending on the style of bowler. I’ve seen our strokers go straight up the twig with it, and the crankers can get as deep as the 5th arrow with it. So long as you have the right surface/layout there is very little you can’t do with this ball on Med-Heavy to Med-Light conditions. For the extremes there are better options of course, but on 80% of the patterns this ball will get it done. I look forward to trying out more RotoGrip equipment in the future as there is no better time than now to give this lineup of great bowling balls a spin.

Clint
http://raidersbowling.com/
http://rotogrip.com/
http://wright.edu/

WSURaiders

  • Newbie
  • *
  • Posts: 2
Re: Nomad Pearl
« Reply #45 on: January 11, 2010, 11:57:44 AM »
I purchased this ball to use on different tournament conditions while bowling for Wright State University.  The ball is drilled using a 75 x 5 x 20 dual angle drilling.  Most of the use with this ball this season has come on longer patterns comparable to the shark.  This ball is great for when the lanes start to burn up because you can get inside with it and it still has plenty of flip at the end.