win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: mb placement on a pro pin?  (Read 1140 times)

ballcollector

  • Full Member
  • ***
  • Posts: 103
mb placement on a pro pin?
« on: June 22, 2007, 02:03:17 PM »
I just bought a pro pin epic journey the question I have is has anyone had a pro pin ball that had the mb closer to the pin than the cg this ball has the small rg label 7" from the pin and the cg is 10" from the pin never seen this before was curious if this is common or possibly mislabeled?
Logged

 

themagician

  • Hero Member
  • *****
  • Posts: 2974
Re: mb placement on a pro pin?
« Reply #1 on: June 22, 2007, 10:05:14 PM »
It is somewhat common for a pro-pin ball to have an extremely large Pin out, thus is why they are called pro-pins (or as some prefer BLEMS!).
--------------------
Bowling up a storm with a punishing hammer.
Logged
-Mike
-MOTIV Staff

C-G ProShop-Carl

  • Hero Member
  • *****
  • Posts: 5825
Re: mb placement on a pro pin?
« Reply #2 on: June 22, 2007, 10:09:18 PM »
"pro pin" or "pro cg" are nice ways of calling a ball a blem.



--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
with locations in:
Youngstown Ohio (West Side Lanes)
and
Boardman Ohio (Camelot Lanes)


Tag Team Member #1

TAG TEAM COACHING!!!!!!/Co-Founder

www.trackbowling.com
Logged
Carl Hurd

Austintown Ohio (Wedgewood Lanes)

900 Global, AMF Staff Bowler

Tag Team Member #1

<b><i>TAG TEAM COACHING!!!!!!</i></b>/

Joe Jr

  • Hero Member
  • *****
  • Posts: 2776
Re: mb placement on a pro pin?
« Reply #3 on: June 22, 2007, 10:11:06 PM »
That's common for Pro-Pin asymmetric balls.
--------------------
My Vid
Banned under the user name Richard Cranium
Formerly Brunswick Lefty
Logged

ballcollector

  • Full Member
  • ***
  • Posts: 103
Re: mb placement on a pro pin?
« Reply #4 on: June 22, 2007, 10:12:20 PM »
just wondering about the cg being on the opposite side of the mb
Logged

BrunsWolf

  • Hero Member
  • *****
  • Posts: 588
Re: mb placement on a pro pin?
« Reply #5 on: June 22, 2007, 10:13:44 PM »
Don't worry, you can still use it. Draw a line from the pin through the MB. At 13.5" inches away from the pin is the anti-pin. Use this just as you would the normal pin. So now you have a ball with 3" pin distance and the RG is in the range that it should be
--------------------
Today:......was it you?........or was it the Laneman?.......or was it God?

Unoffical Youth Brunswick Staffer
Yea, I'm a crown bearer. Why aren't you???

Jared Wolf
Jonesboro, AR
http://brunswick802.bowlspace.com/
Logged
Jared Wolf
Jonesboro, AR
Brunswick Advisory Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

RyanRPS

  • Hero Member
  • *****
  • Posts: 862
Re: mb placement on a pro pin?
« Reply #6 on: June 23, 2007, 06:10:03 AM »
quote:
Don't worry, you can still use it. Draw a line from the pin through the MB. At 13.5" inches away from the pin is the anti-pin. Use this just as you would the normal pin. So now you have a ball with 3" pin distance and the RG is in the range that it should be.


I do this with very long pin symmetrical cored balls... never thought it would work with Asym's though...

Ryan
Logged

tekneek

  • Hero Member
  • *****
  • Posts: 5657
Re: mb placement on a pro pin?
« Reply #7 on: June 23, 2007, 11:56:43 PM »
lol, I have a Battle with a 9" pin, the MB is at 1:00 to my thumb hole with the CG 2" below and right of the thumb. Hits like a Mack truck, its referred to as the "John Holmes Special" the origional Big _ick Daddy from Cincinnati.
--------------------
Steve
Leading Edge Pro Shop
512-755-2947
Visit www.leadingedgeproshop.com  

http://stores.ebay.com/Leading-Edge-Pro-Shop

Paypal address : tekneek@wildblue.net
Logged
Steve
Leading Edge Pro Shop
Radical Bowling Technologies Advisory Staff
brinkley2223@yahoo.com
512-755-2947
Pages: [1]
« previous next »