Which ball in the Storm/RG line would be a step up in overall strength from the Wrecker?  I would like something a little earlier/stronger. 

Maybe the Disturbed or the Marvel-S?  Or are these balls several steps stronger?

Over the past several years. I have been throwing a range of equipment, but when I look back, all of my best scores/tournament have come when I was throwing Storm/RG equipment.  I am going to give it a shot this upcoming season.

Thanks,
Scott

All house patterns, couple different centers.  They put out a fairly decent volume.  At the end of last year, I used the Wrecker most of the time and it worked quite well.  However, a few times it seemed to push a little too far down the lane and I ran into carry issues.  I wanted to get something a little earlier/stronger for these instances.  I also plan on picking up something a step down from the Wrecker.

All house patterns, couple different centers.  They put out a fairly decent volume.  At the end of last year, I used the Wrecker most of the time and it worked quite well.  However, a few times it seemed to push a little too far down the lane and I ran into carry issues.  I wanted to get something a little earlier/stronger for these instances.  I also plan on picking up something a step down from the Wrecker.

If you only want a "little earlier and a little stronger". wouldn't it make sense to drill another Wrecker, with a shorter pin-PAP, and larger VAL angle and, maybe change the surface for less length, maybe 1500/2000 grit with a mild hand-polish? You'd have a ball whose characteristics you know, with an earlier, stronger roll to handle that little bit extra oil.

I would go Disturbed, it will start up sooner because its a solid, but it stores its energy rolls smooth and continues. I have mine drilled pin down with it shined up just a bit and I love it. The Soul I believe will be too strong if you want to step up from the Wrecker. You can also adjust the cover if its just a bit too strong put some polish on it or if it is not strong enough put a lower cover finish on it.

I'd have to go with both J_Mac and charlest on here.  You could go with something such as the Rumble if you want a solid cover with a similar core that will read earlier.  You could also look at the Deranged, Hy-Road or Hy-Road Pearl balls as an option too.  The Disturbed could possibly be more than you need, and the Marvel-S would really be overkill with the NRG cover.

Depending on how you have the Wrecker already drilled, you could simply go with a slightly different layout, have one pin above/pin below, and then just change the surface.

Sounds like he only has one ball.

Yeah...in process on purging and rebuilding.  Only holding onto the Wrecker...  Drilled with a Motion hole layout. 

Thanks for the info