win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Requiem on the way  (Read 2928 times)

mainzer

  • Hero Member
  • *****
  • Posts: 4405
Requiem on the way
« on: January 16, 2010, 06:48:09 AM »
Hey guys I have a Requiem on the way. How do you have yours drilled? and what reactions do you see from it?

Does the Requiem have okay length for a a dull Solid Reactive? And how about backend? Good Backend for a dull Soild?

I am thinking about going with one of two old Stand by drill patterns for Requiem either pin Under or over Bridge not sure which yet.

Thanks for the opinions in advance!
--------------------
"His Loyalty couldnt be bought at any price
but it could be rented remarkably cheaply"
-Inquisitor Allendyne-

Founding Father of the BR Inquisition

MainzerPower
Logged
"No one runs...from the conquerer "

MainzerPower

 

golfnutFL

  • Hero Member
  • *****
  • Posts: 2111
Re: Requiem on the way
« Reply #1 on: January 16, 2010, 05:56:07 PM »
OOB with a strong drill, this ball starts up very early and handles a LOT of oil. Early roll, continuous through mids and back end but not a big reaction in the back end- think hard arc, as long as there is enough oil to prevent it from burning up. It is a strong oiler but definitely not skid/flip at all. That's the Epicenter's job.

Drilled for length with some surface adjustments could result in some more length and back end reaction, but that isn't really what this ball was designed to do.

If you bought this ball to be a medium heavy to heavy oil ball, you will not be disappointed.
Logged

mainzer

  • Hero Member
  • *****
  • Posts: 4405
Re: Requiem on the way
« Reply #2 on: January 17, 2010, 12:20:25 AM »
it is for Meduim to heavy more heavy than Meduims though
--------------------
"His Loyalty couldnt be bought at any price
but it could be rented remarkably cheaply"
-Inquisitor Allendyne-

Founding Father of the BR Inquisition

MainzerPower
Logged
"No one runs...from the conquerer "

MainzerPower

SVstar34

  • Hero Member
  • *****
  • Posts: 5464
Re: Requiem on the way
« Reply #3 on: January 17, 2010, 12:33:15 AM »
its definitely for more than medium unless you dont have much hand and alot of ball speed
--------------------
My Arsenal:
Rogue Cell (coming soon)
Bounty(4.5 x 4.75 Fresh 1000 Abralon)
Twisted Fury(5 x 4 500 Abralon + Reacta Shine)
Blue Vibe(5 x 5 4000 Abralon + Reacta Shine)

Logged

Gunny

  • Hero Member
  • *****
  • Posts: 1543
  • Zombie Hunter
Re: Requiem on the way
« Reply #4 on: January 17, 2010, 08:10:09 AM »
Mines drilled 60°x 4.5 x 40°, and even at 2000 the ball is super strong.  
golfnutFL hit it on the head, "think hard arc".  I can play deep with mine
and know its going to recover.  but once the head oil is gone, its either
move more left or bag it.
Logged

DaveW

  • Full Member
  • ***
  • Posts: 159
Re: Requiem on the way
« Reply #5 on: January 19, 2010, 05:43:48 PM »
Just drilled this one ..

105° x 4 x 30°

Should be clean, super smooth and late (but not angular). This is my layout for a multiple angle ball that won't spend its energy too early.
--------------------
Dave W - Seismic Staff
www.seismicbowling.com
Seismic YouTube Channel - subscribe now!
Logged

RyanRPS

  • Hero Member
  • *****
  • Posts: 862
Re: Requiem on the way
« Reply #6 on: January 19, 2010, 06:51:47 PM »
I still think its going to hook in your back swing Dave

Ryan
--------------------
------------------
http://www.tenpinbowlingvideos.com
http://www.seismicbowling.com
http://www.RPSbowling.com
Logged

mainzer

  • Hero Member
  • *****
  • Posts: 4405
Re: Requiem on the way
« Reply #7 on: January 19, 2010, 08:11:52 PM »
Dave that is one werid looking drill pattern.

Thinking about using the Magical Layout on mine, Pin over bridge with the MB swung out about a inch from my thumb. Always have a great look on multiple conditions when I use this layout.
--------------------
"His Loyalty couldnt be bought at any price
but it could be rented remarkably cheaply"
-Inquisitor Allendyne-

Founding Father of the BR Inquisition

MainzerPower
Logged
"No one runs...from the conquerer "

MainzerPower

DaveW

  • Full Member
  • ***
  • Posts: 159
Re: Requiem on the way
« Reply #8 on: January 20, 2010, 02:45:05 AM »
quote:
Dave that is one weird looking drill pattern.


Back in the day when companies started selling blems, I got a couple of balls with 5.5" pin-cg and 5oz of top weight, and label leverage was a safe drilling.

I just don't need the extra torque from the balls MB on most patterns. Swinging it into the track gives me a very even roll, with a little influence right at the pins once my axis has migrated near to the center of my grip.

I'll try and post a video of how it rolls.
--------------------
Dave W - Seismic Staff
www.seismicbowling.com
Seismic YouTube Channel - subscribe now!
Logged

Dean Richards

  • Sr. Member
  • ****
  • Posts: 315
Re: Requiem on the way
« Reply #9 on: January 21, 2010, 03:54:25 PM »
What a layout. I have never swung my cg left. What does that do? Make it wobble a little bit longer so it doesn't roll up early?
--------------------
Lindenwood University
www.seismicbowling.com
Logged
Multiple casher in handicap 9 pin events

DaveW

  • Full Member
  • ***
  • Posts: 159
Re: Requiem on the way
« Reply #10 on: January 24, 2010, 09:39:06 AM »
Yeh Dean, i find it makes it lay off a little more. Good combined with a shorter pin-pap (3.75" - 4.5") and higher pin placements above the midgrip line I find.
--------------------
Dave W - Seismic Staff
www.seismicbowling.com
Seismic YouTube Channel - subscribe now!
Logged
Pages: [1]
« previous next »