win a ball from Bowling.com

Author Topic: T-Road Solid  (Read 16541 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
T-Road Solid
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: 100.00
Coverstock: R2Sâ„¢ Solid Reactive
Weight Block: Inverted Fe² Technology
Ball Color: Blue All colors do vary somewhat from the picture shown.
Ball Finish: 1000-Grit Abralonâ„¢
RG Differential: 0.058 (Medium-High Flare) on a scale of .000-.080 Low Flare-High Flare
RG Average: 2.52 (Medium-Low) on a scale of 2.43-2.80 Very Low-High Break Point
Recommended Lane Conditions: Heavy Oil

 

thefunnierman

  • Jr. Member
  • **
  • Posts: 18
Re: T-Road Solid
« Reply #1 on: June 24, 2007, 05:12:15 PM »
hey everyone... i got the t-road solid june 21 2007 drilled like this
O O
 p

 CG
 0

The ball has a smooth roll through the mid-lane and a nice strong move on the backend. Played really well until it polished itself. You need to sand it every week or maybe every day. Its best for  fresh conditions ( typical house patterns and longer patterns) Thanks to Wesley Jones and Dave Sill at the Strike Zone Pro Shop in Brunswick, Georgia.

--------------------
-the funnier man
-Brunswick, GA
-Right Handed
-205 avg
-In the bag: Total NV, Special Agent, T-Road solid, Spit Fire, Tropical Storm, WD

Visit the Strike Zone Pro Shop in Brunswick, GA!!! Silver level coaches Wesley Jones and Dave Sill would be glad to help you.

tommygn

  • Hero Member
  • *****
  • Posts: 694
Re: T-Road Solid
« Reply #2 on: July 05, 2007, 03:59:32 PM »
I have been waiting for this ball for some time now, and this ball was worth the wait! The original Thunder Road was one of my favorite balls, so i was hoping to see that "look" on the lanes. I am very impressed with the reaction.
 I drilled my 15lb T-Road with the pin under my ring finger, and the CG kicked 3 degree's left (based off of my grip line, and I am a lefty).
This put the pin and cg @ 5 x 4 7/8.
I also altered the surface to 800 grit (Storm step 1#). I didn't need the ball to read as Quickly as the box finish would allow. Bowling on a fresh THS, this ball was very clean through the front(thanks to the med.-high RG), with a very controlled move @ the mid lane, and very continuos through the backend. This ball is a perfect go to ball from my Thunderstruck solid (pin and cg stacked under my ring finger, 1500 grit finish) when the lanes carry down a bit, and the T-struck is just too weak to get through it.
This ball just punched the pins in the face with authority!!! I was absolutely amazed at how many 8 pins got tripped from the head pin coming across the deck!! Pins were just flying everywhere on the deck. I can only imagine how this ball would react with a strong drilling?!?!
Anyone looking to upgrade there "Thunder line" from Storm to a ball that will handle more volume, and a continuos move through the lane will not be disappointed.

Thank You Storm for yet another great offering!!
God creates us with a blank canvas, and the "picture" we paint is up to us. Paint a picture you like and love!

thegame

  • Hero Member
  • *****
  • Posts: 721
Re: T-Road Solid
« Reply #3 on: July 16, 2007, 11:56:00 PM »
Just got this along with the Secret Agent recently, had them both drilled stacked leverage.  These are both very powerful balls, but I will focus this review on the T Road Solid.  This T Road is exactly what I wanted, very early, smooth, and crushes the rack when on line.  Reminds me a lot of the Brunswicks I used to throw, and maybe even of a Tour Power, although I didn't have one, that was one of the smoothest rolling pieces Storm ever designed.  This ball does require some oil.  When attempting to use it on my easy scoring house shot, it was just too much ball, I had to get too deep inside for optimum carry, and the pattern was a little too short for it also, as it dove high on shots I thought I threw pretty well, leaving a few 4 pins.  Took it to a new center that I hadn't bowled at yet at a casino 20 miles from me, and it was a great shot to see this ball shine on.  More oil on the outside, and longer pattern.  The T Road got pushed down the lane right where it belonged, and when it caught the good backends they had there, it made a nice smooth move into the pocket.  Was able to give it a little bit of room to the outside and watch it come in charging hard.  I feel this ball is a little less hook than the Secret Agent, but it is very close, just earlier and a smoother breakpoint.  Excellent ball for the price.

olererack

  • Jr. Member
  • **
  • Posts: 71
Re: T-Road Solid
« Reply #4 on: July 24, 2007, 01:25:26 AM »
Storm - T Road Solid

The new T-Roadâ„¢ Solid features an aggressive and porous 1000-grit
Surrounded  with R2Sâ„¢ pearl reactive coverstock. R2S material,
And Inverted Fe² Technology Weight Block
 When combining these proven technologies, the .
T-Roadâ„¢ Solid will turn any corner, even on the slickest of conditions
 In  nature sanded form
Great recovery & super Hitting Power
Extremely clean thru the fronts with real good length and predictable off the break point.
like  the T-road pearl and  the Storms Fire-up,
Reads the dry instead of the big jerk that is common in other balls.(slid Flippy)
This combination provides midlane revs and an angular backend reaction putting you on a collision course with K.O  punch impact.
Fragrance Blueberry
 
www.BuddiesProShop.com
Buddies Pro Shop Staff
Vise Grips Staff

Bigmike

  • Hero Member
  • *****
  • Posts: 1073
Re: T-Road Solid
« Reply #5 on: July 29, 2007, 09:00:57 PM »
See stats for profile.

I drilled two of these to try out via the PBA offer.

Lay Out # 1: 4" from PAP (about 1 " under ring finger), 45deg angle. Large wt hole 3.5" down on the VAL.

Lay Out #2: 5" from PAP (just above the fingers), 75* angle, 7/8 hole on axis.

Surface: Both balls are box or 1000abr.

Purpose: To give myself a couple of balls to compliment each other with smooth looks off the friction on the back that I could use on longer oil/higher volume patterns.

Observations: #1 gets going early and I used it on our league Shark pattern with soft speed to create some midlane friction for a nice smooth move and good carry. The volume on Shark makes carry tough for all styles and if you fight keeping your speed slow like I do sometimes, half tens or worse are there in the weeds for when you throw a bullet one time on accident. #2 gets too long thru the front/mids for me on the fresh to knock anything down with. I had to wait until we had started to wear the fronts down more before any kind of carry kicked in. I have used #2 on a shorter version in the 40 foot range and on that pattern the ball flips and crushes racks. I was able to keep in online pretty easy and it made a predictable move to the hole v. jerk (rope 10' and 9's).

Final thoughts: If you like the T-Road Pearl and want something that can handle more volume and length, then this is a good ball. Smooth and predictable no matter the layout. In fact, I already want to drill a third one to compliment the 5" pin. I am thinking of a 6" pin at a 90* angle with no weight hole and about a 4000 surface/no weight hole to use on medium-shorter patterns. Keep up the good work Storm.
--------------------
Mike Craig-Columbus, OH
"Tell me Cup, how does a great ball striker like you shoot an 83? Well I lipped out this putt on 18......"

Mike Craig - Storm Bowling Amateur Staff - Westerville, OH

ryno4000

  • Jr. Member
  • **
  • Posts: 43
Re: T-Road Solid
« Reply #6 on: August 25, 2007, 11:57:00 AM »
Drilling: 5X4 pin - 3 1/2in. over midplane  Pap: 5 1/2 right, 1/4 up

I drilled this ball up to get a little extra length when my Special Agent is too much (this seems to be right after practice.) With this drilling I got an extra 4 to 5 ft. and one of the biggest moves on the back with a dull ball that I've had since my Trifecta. when the lanes carried down I had a better time setting it down on 34 and sending it out to 4 to just loop around the oil. I am a cranker (475 rpm) but, I have never had a ball that I can do this with. Overall this is one of the smoothest, and most consistant balls that I have ever thrown.
--------------------
Ball that shot first 300: $199. Ball that shot first 800: $229. Beating Walter Ray at the USBC Masters: Priceless

TRoadster

  • Jr. Member
  • **
  • Posts: 19
Re: T-Road Solid
« Reply #7 on: September 08, 2007, 08:03:33 PM »
This is my first post so I will tell everyone a little bit about my style. I have a high rev rate but I can play pretty much anywhere on the lanes without losing to much power or accuracy. I prefer however to play deep 30 to 10 when conditions allow. I have been a devout Storm bowler for some time now even though I have strayed a couple of times and been sorry. I am currently carrying a Shift, Special Agent, Thunderstruck Pearl, Big Hit Pearl, and T-Road Solid.I had my solid drilled up a couple of weeks ago and I love it. I have the pin @ 4 1/4 inches from PAP ( which puts it under my middle finger because my track is very low) and the cg is just left of being dead in the palm. This drilling is supposed to get the ball to rev up mid lane and have a strong but smooth reaction and that is exactly what I get. I bowl in a second shift league that follows a couples league and the lanes are generally very wet/dry. This ball handles the wet/dry better than anything I have ever thrown. There is no over reaction and the ball hits like a truck. The only thing I have to be aware of is  trying to cover too many boards. When I do that the ball hits weak. My low game with this ball for the season is 227. One thing I have noticed is that this picks up every bit of dirt, dust. grim, or whatever off the lanes and machines. I HAVE to clean it after every set. Hope this helps and encourages you to BUY THIS BALL!

doust

  • Jr. Member
  • **
  • Posts: 11
Re: T-Road Solid
« Reply #8 on: October 27, 2007, 12:42:38 AM »
After watching Jason Belmonte average 249 at the New South Wales Open with a T-Road Solid in matchplay, I was open to the idea of punching one out. : )

Well, I finally put some holes in one. I've only bowled seriously with this at the Northern NSW Open so far, but here's my experience to date.

LAYOUT
Ball had 2.7 Top Weight and a 3" pin. Pin was laid out in a leverage position (3 3/8" pin to PAP) below and right of the ring finger for me, with the CG toward the grip centre. This placed the Mass Bias on the first track flare.

COVER
I left the cover in the box finish (1000 grit Abralon) and sucked the oil off the heads at Holiday Lanes to shine it up. (A friend followed me to that pair. I'd made a real mess of the heads. Sorry mate!) I seriously did not expect this much hook from a mid range ball with a rolly layout. This thing is a monster! Have shined the cover since.

REACTION
The ball has serious friction with a sanded R2S coverstock. It wanted to react early and even rolled out on the first few shots. As it got some oil in the case, it got better and better, clearing the heads effortlessly in about 10 shots. The Thunder core immediately migrates to the PAP, set and then flips off again, creating an increasing radius of gyration as the ball flares beyond the stabilising effect of pin on PAP and the pin moves further away from the axis. It's a very dynamic core.

Then the T-Road Solid turns the corner. Wow! This ball covers some serious real estate in the backend. On wood lanes too.

Pin carry is excellent and very loud. (A trait of R2S balls - Special Agent makes a racket too.)

I tried the T-Road Solid at Tuggeranong on Tuesday night. I was throwing the ball pretty bad as I was still tired from the Coffs Harbour drive. Even so, it was too big for me on the screaming backends at Tuggeranong, where free hook is handed out at the door. This could be overcome with some polish, but I'll be keeping this ball as a tournament piece.

SUMMARY
Overall - This ball turns the corner with strength, but isn't too touchy to control. Like a Special Agent, but goes a bit longer. They complement each other nicely. Hits like a truck too, which is always a plus.

If you want a hand to hook the ball at a reasonable price or you're looking for a strong arcing piece for tournament play, I recommend the T-Road Solid to you. This ball is mid priced too. I'd also recommend it for use in houses where the backends get streaky, as it will get up in a predictable fashion.

Bowljr300

  • Full Member
  • ***
  • Posts: 115
Re: T-Road Solid
« Reply #9 on: November 03, 2007, 11:49:27 PM »
Ball:

Started with 2.75 top weight.  Pin 4 inches from the cg.

Drilling:

I placed the pin 4 inches from my pap and above the fingers.  CG is 1/2 inch from the grip line.

Cover stock:

Out of box

Lane Condition:

Freshly oiled house shot.  Heavy concentration of oil 10-10.  Backends had not been stripped from early junior league, so there was a significant amount of carry down.

Reaction:

This ball was very clean through the heads.  But despite its medium high RG, there was no evidence of ball lope.  Unlike other aggressive balls, this one did not square up in the mid-lane.  Instead, it continued straight to the breakpoint.  While it cannot be said that this ball has a skid/flip reaction, it was surprisingly strong at the break point.  The ball was able to dig out the 10-pin on half pocket shots.  Trying to play anywhere from 12 board right, caused the ball to hook at my foot--typical house shot.  The only playable area was third arrow out to a breakpoint of 7.  Those with more hand would have to play deeper, or polish the cover stock.

Comparisons:

Versus my Raw Hammer Anger, the T-Road was noticeably stronger at the breakpoint.  The Anger squared up in the mid-lane but was not as strong at the turn. The T-Road gave me better recovery and fewer 10 pins.  The Anger was more susceptible to the carry down.

Versus my Bash, no comparison.  Not that I expected it to be close, and it wasn't.

Versus my Gamebreaker it was interesting.  My Gamebreaker was able to control the mid-lane far better, but didn't have as good a look.  T-Road was far stronger at the breakpoint.  T-Road carried better.  Gamebreaker was superior when I played deeper and didn't send it out as far.  Without help from the dry right, the Gamebreaker looked stronger.  This is where the GameBreaker's lower RG makes it the superior choice.  For those with soft speed, I would recommend the T-Road.  The GameBreaker would be too early and too soft.

Conclusion:

I found the T-Road to be an outstanding ball with surprising strength at the turn.  Don't expect to use this ball unless you can play a good amount left of 10 board.  Those with soft speed, will really enjoy this ball.  It won't give you hook and quit like lower RG balls, and is aggressive enough to stand up to all but the monster balls.  Those wanting more hook but at a modest price point, could add some surface. Those whose speed exceeds their revs, could still use this ball but would need to modify where they play on the lane, or the cover.

This is an outstanding mid-priced ball.



agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: T-Road Solid
« Reply #10 on: December 05, 2007, 06:58:50 AM »
BALL SPECS
Pin Length - 3
Ball Weight - 15lbs

DRILL PATTERN
Pin below and right of ring at 4.5” from axis.  The cg is kicked out, about 3” from the axis.  

BOWLER STYLE
Rev Rate - 325ish
Ball Speed - 17 by the quibica
PAP/Track - 5 1/2 right, 1/2 up
SURFACE PREPARATION
Grit - OOB
LANE CONDITION
Length - 41ft
Volume - med to heavy
Type (Wall, Xmas Tree, Sport) - various, see below
COMMENTS
The ThunderRoad Solid has been my go to ball for med to heavy conditions.  I’ve used it on the Chameleon playing right up 10.  It reads the midlane early and has a continuous arc.  I was able to play there when pretty much nobody else was.  
On our house shot, it is too much ball and reads the pattern to early.  With this layout, it isn’t a ball I can pitch right and watch it roar back to the pocket.  It wants to start early and roll, sending it to the dry just makes it burn early.  I did take the surface up to 2000 Abralon and it was better but not spectacular on our house shot.  I didn’t intend to use it on the house shot, so I chose to return it to box finish and put back into the tournament arsenal.
Overall, it is a strong ball and requires oil to perform.  Another winner from Storm and I don’t see this gem leaving my bag anytime soon.

--------------------
FUFU

The SuperHitMan

  • Hero Member
  • *****
  • Posts: 1261
Re: T-Road Solid
« Reply #11 on: December 05, 2007, 10:14:30 PM »
Ball Wieght: 15
Top Wieght: 3.04 oz
Pin Placement: 3-3.5
Hand: Right
Drilling: Modified Storm layout 1 (pin is 3 inches away from ring finger to the upper right.(Had to add wieght hole)
Surface: Came at box finsh (but changed with ebonite matte 1200 finish)


The reaction of this ball reminded me of a smoother double agent with more contiuation on the back part of the lane, the first time I used this ball was at AMF Country Club on sunday on a tournament pair of lanes (40ft flat pattern) and with the oob finish the ball was very smooth predictable nothing erratic and read the lanes better than I expected. The TRS is not a ball I would call angular but it is "roll heavy" like the double agent.

I went to league with the surface at 1200 matte and the ball was amazing, the ball was more continuous through the backend constantly splitting the  eight-nine in half and much like the double agent set up in the mid-lane.

Smooth mid lane transition, continuous through the backend, I'm glad I recieved this ball because it is truly a beast. If you liked the double agent then you might like this one, if you didnt like the double agent try this ball...theres a chance you might like it

Shout out to Hoss Central, 12 In a Row Pro Shop, Ron Davis Jr, Chappy, Christians, Wiccans, Non-Believers, and Ball Death.

HooRah
--------------------
Founder of H Phi H

Member of Hoss Central Inc

-Ive been called Cocky and Arrogant thorughout my career...Being humble is alright and all but I prefer to Shut my critics up and Shut'em Down and if that makes me Cocky and Arrogant then  I am what I am- K.C.D

I don't care if my signature is long. Deal with it.







K.C. White II
Motiv Staffer
MotivNation will take a nation to stop.


Bowling is about what the bowler believes it to be, so what is bowling to you friend?

PikevilleBwl

  • Full Member
  • ***
  • Posts: 122
Re: T-Road Solid
« Reply #12 on: April 03, 2008, 12:43:21 AM »
Hi everyone.I was bowling the US Open a week ago and Chris S from Storm drilled me up a T-Road Solid for the US Open and I bowled great with it not knowing what this ball was capable of doing. He had it drilled pin under my fingers and cg kicked out about a inch with a balance hole in the side. Well like I said bowled okay with it at the Open and brought it back home and have been on fire with it. I bowled my travel league on Sunday morning and went 258,220's,192 ended with a 667 i think. Well I said wonder what it do on a house shot at my house and I will tell you i love it. I went 267,300,203 for a 770 first time bowling in my own house with this ball. the reaction is awsome in will be a great ball for anyone that wants a solid. This ball you can tweak the cover and it will be great. I wet sanded mine with a 2000 ablaons and polished it and I love it.

baldi316

  • Newbie
  • *
  • Posts: 2
Re: T-Road Solid
« Reply #13 on: November 19, 2008, 01:50:30 PM »
I havent been able to throw it to much yet. But I do like it on heavy oil conditions. It rolls well through the middle and has that extra punch at the end. If youre looking for something to smash the pocket at the i would recommend this ball for sure

GMU Bowling

Mav_Senior87

  • Jr. Member
  • **
  • Posts: 5
Re: T-Road Solid
« Reply #14 on: February 24, 2009, 11:40:59 PM »
See Profile for Stats

http://s99.photobucket.com/albums/l308/unobowler01/?action=view¤t=DSCN12250015.jpg

4" x 4", pin in ring finger

The T-Road Solid is a good ball when you’re looking for consistency.  It reads the mid-lane well thanks to its rougher surface yet still rolls hard on the back end.  I would say this ball fits in between the Hy-Roads sharp back end roll and the Dimension’s smooth arch.  This ball is good for medium oil patterns where you want strong back end reaction but can’t afford the ball to skid too far before it hits the breakpoint.  I like to use this ball on medium length patterns where you have to play out towards the gutter but rather directly.  

I suggest this ball for players who are looking for something that hits the back end hard but also rolls smoothly on the mid-lane.