win a ball from Bowling.com

Author Topic: Storm Gravity Shift problems  (Read 1301 times)

KingofKings696

  • Sr. Member
  • ****
  • Posts: 465
Storm Gravity Shift problems
« on: September 06, 2008, 04:45:09 AM »
I have a storm gravity shift with pin high right and throw with a slower speed 12-15 area and throw this ball with almost no revs and here in lies the problem. I also have a green vibe drilled pin high between fingers and a pap of 4out 11/16 up medium track and seem to get 10 times the rotation out of this ball. The proshop (not as good one which I now know) who drilled the gravity up says it works as it is suppose to. However I went to the good local proshop and he said the pap was only 2 something and I get only 3 to 4 flare marks and they have a decent spread to them. But what I really dont understand is the side and topweights on both are identical yet the vibe actually outhooks it. So my question is what can I do to make the gravity useful as it just isnt getting it for me and the stupid proshop will not replace it even aften they misdrilled it horribly and had to move my ring down shorten span almost a half inch(put biggest slug in to get it) and many other things.

 

SVstar34

  • Hero Member
  • *****
  • Posts: 5464
Re: Storm Gravity Shift problems
« Reply #1 on: September 06, 2008, 01:07:05 PM »
do you mean outhook, because the Vibe has more movement on the backend?? To get full potential out of a layout, the ball needs to be adjusted to your PAP, or you can adjust the surface
--------------------
My Arsenal:
Twisted Fury
Raw Hammer Pain
Blue Vibe


Gazoo

  • Hero Member
  • *****
  • Posts: 1872
Re: Storm Gravity Shift problems
« Reply #2 on: September 06, 2008, 03:30:46 PM »
Your game is better served by symetric cores(Vibe) verus asymetric(gravity). As far as your Gravity goes, the correct PAP is critical as SVstar34 stated so you need to find a different driller to set the ball up correct.

Edited on 9/6/2008 3:31 PM

KingofKings696

  • Sr. Member
  • ****
  • Posts: 465
Re: Storm Gravity Shift problems
« Reply #3 on: September 06, 2008, 05:32:48 PM »
That I have done that driller feels that it is just a gimmick and is there anyway I can get my money or a new ball if they say its correct?

Gazoo

  • Hero Member
  • *****
  • Posts: 1872
Re: Storm Gravity Shift problems
« Reply #4 on: September 06, 2008, 05:47:49 PM »
Bad drilling is not a warranty issue so that only a professionally customer service run shop will give you your money back or drill up a new ball and this guy does not sound like thats what your dealing with. Sounds like you are just going to have to replug the ball and have it drilled by someone who knows what they are doing.

KingofKings696

  • Sr. Member
  • ****
  • Posts: 465
Re: Storm Gravity Shift problems
« Reply #5 on: September 06, 2008, 06:09:35 PM »
Also what in particular is covered under warranty(they broke warranty by having to plug the ring due to misdrill(still wouldnt replace) so at this point they are obviously at this point covering the manu. warranty as they plugged it against my call. So in there they voided the warranty even though I didnt ask for them to its their "quick fix like everything".

Gazoo

  • Hero Member
  • *****
  • Posts: 1872
Re: Storm Gravity Shift problems
« Reply #6 on: September 07, 2008, 10:15:58 AM »
Warrany covers defects in the ball and not bad drilling. Thats up to the pro shop operator and whether they have integrity or not. Sounds like yours doesn't.

Bowler19

  • Sr. Member
  • ****
  • Posts: 433
Re: Storm Gravity Shift problems
« Reply #7 on: September 07, 2008, 11:50:30 AM »
Bad drills are not a warranty issue as said.

As far as the PAPs being that different. If the spans feel are the same that would tell me you are doing something different when you release the balls. PAPs change a little form ball to ball but 2+ inches is alot for it to change. Have the good pro shop guy watch you bowl with both balls and see if something is different.

Also if you are bowling on too dry a condition for the gravity it could be rolling out way too soon.

good luck
--------------------
Jason K
But be not afraid of greatness: some are born great, some achieve greatness, and some have greatness thrust upon them.-W. Shakespear

Jason @Juniors Pro-Shops
LaSalle, Quebec
Located inside Pont Mercier Lanes.
Edmonton, Alberta.
Located inside Ed's Rec Room.(WEST ED MALL)
King Of Roto-Grip In Canada.

www.juniorsproshop.com

KingofKings696

  • Sr. Member
  • ****
  • Posts: 465
Re: Storm Gravity Shift problems
« Reply #8 on: September 07, 2008, 05:27:44 PM »
I generally bowl on heavy oil. I ask as that maybe my only option to getting it fixed is for it to have a "defect".