win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Passion Problems  (Read 4728 times)

Bar5003

  • Hero Member
  • *****
  • Posts: 1627
Passion Problems
« on: June 28, 2006, 01:18:25 PM »
first off before i get into anything heres my stats

pap 4-3/8 over 5/8 up
15 degrees axis tilt
ball speed 15-16 mph
rpm (est) 300-350 rpm

passion drilling
3-3/4 x 4 1/2 mb
weight hole on my val pitched away about 1-1/4"

problem:

got it and threw it (oob surface) worked ok but i was never a big fan of that much surface...obviously if i wasnt on enough oil it rolled out, but when i did get on a shot with some more oil, this ball still struggled to turn the corner

so then i took the surface to 800 with a scotch brite pad...this was better, a little more usable, but still not what i was looking for it still just kind of quit on the backend ESPECIALLY with even the slightest bit of carrydown.  when i got on a shorter shot with fresh snappy backends the ball just made a nice hard arc and reacted nicely...but hardly the heavy oil ball i was looking for

i then tried the surfaces of 1000 and 2000....and it got even worse so im back to 800

the last straw was watching this ball go dead straight on the shark pattern from ANY angle...ive never seen anything like it

and usually when i do hit the pocket with this thing carry is a toss up

so what should i do...a few people around here have this ball and thiers turns circles around mine....i know there were problems with cracking but were there any problems with cover durability?

i emailed storm on sunday but have yet to hear back yet

anyone on here have any ideas?

thanks!
--------------------
~Britton~
Logged

 

Jeff Carter

  • Hero Member
  • *****
  • Posts: 848
Re: Passion Problems
« Reply #1 on: June 28, 2006, 09:51:53 PM »
My guess is with the combo of your rev-rate combined with a below average ball speed ( somewhat ), paired with an extremely strong core/cover ball is making the passion burn up and stop at the arrows. The fact that you used a 3 3/8" pin tells me that the ball is revving up and stopping on you. My advice would be to plug it and redrill it with no less than a 4 1/2" pin ( preferrably 5" ). After that you should be able to tweak the surface until you like it. I would reccomend polishing it lightly with Reacta-Shine, then lightly scuffing it back down with a gray scotch brite pad

Unfortunately without seeing it, its hard to help
--------------------
Bowl up a Storm,
Jeff Carter
www.stormbowling.com
www.jeffcarterbowling.com
Logged

Xfest

  • Hero Member
  • *****
  • Posts: 2772
Re: Passion Problems
« Reply #2 on: June 28, 2006, 11:01:53 PM »
friends have had the same problem. after spending that kind of money on that ball - and getting an error like that- unhappy people..
--------------------

Mean Machine (heavy oil)
Machine (medium oil)
Desert Heat (light oil)
Ambush (used for spares - any condition)

Join the revolution.
www.trackbowling.com
Logged
- Kenny "The Kid" Skidmore
The Bowler's Shop, Anderson IN
      "Now that's MONEYYY!"

StormTechDept

  • Jr. Member
  • **
  • Posts: 60
Re: Passion Problems
« Reply #3 on: June 28, 2006, 11:19:55 PM »
Bar5003-

Check your pm's.
--------------------
Bowl up a STORM!!!!!

Storm Tech Dept
tech@stormbowling.com
Logged

Bar5003

  • Hero Member
  • *****
  • Posts: 1627
Re: Passion Problems
« Reply #4 on: June 29, 2006, 07:00:51 AM »
thanks for the quick responses guys...unfortunately plugging and redrilling is not my favorite thing in the world to do, but if i have to do it i have to...
--------------------
~Britton~
Logged

dzydvl76

  • Jr. Member
  • **
  • Posts: 38
Re: Passion Problems
« Reply #5 on: June 29, 2006, 12:09:17 PM »
Honestly I had the same issue. Tried OBB, polished it, sanded it I should say my PS did. Nothing. I ended up plugging the ball and it's going to a friend. Oh well some work some don't. This was a first release ball (got it at a VIP shop before the actual release)
Logged

pnj1967

  • Hero Member
  • *****
  • Posts: 3633
Re: Passion Problems
« Reply #6 on: June 29, 2006, 12:25:39 PM »
Bar5003, Listen to what Jeff is telling you.
--------------------

 Enjoy the people on the ballreview.com forum. Like to help when I can.

Logged






millerboy

  • Jr. Member
  • **
  • Posts: 5
Re: Passion Problems
« Reply #7 on: July 04, 2006, 01:24:01 PM »
Bar5003: I and about 10 other bowlers have had the exact problem you are having. It may be inconsistencies with the covers or something, but nonetheless I will never buy  anything in the paradigm family again. I as well took the ball down to 800, and it did hook more, but hit like a pillow. None of these balls were bought online either, and of the 10 other bowlers, 2 of those passions cracked, so i think there is something more to it then just the bowler.
--------------------
300.. Nah thats childs play, now 301, that takes talent
Logged

Xfest

  • Hero Member
  • *****
  • Posts: 2772
Re: Passion Problems
« Reply #8 on: July 04, 2006, 02:17:51 PM »
agreed to the post above- alot of my friends have thrown this storm ball saying that it was one of the strongest balls out - in a few days- they had changed their minds.
--------------------

Mean Machine (heavy oil)
Machine (medium oil)
Desert Heat (light oil)
Ambush (used for spares - any condition)

Join the revolution.
www.trackbowling.com
Logged
- Kenny "The Kid" Skidmore
The Bowler's Shop, Anderson IN
      "Now that's MONEYYY!"

stormed1

  • Hero Member
  • *****
  • Posts: 1755
Re: Passion Problems
« Reply #9 on: July 04, 2006, 07:00:34 PM »
I remeber from the Storm seminars that they told us at least 4 1'2 pin to axis distance as the cores are so strong the ball will burn up. I have that problem with most asym's due to my loer ball speed. Too many times i see people wanting to throw too much ball for the conditions and then complain when it doesnt work.
Logged
Current arsenal


Break Down 60x4.5x60 @3k+polish
coming soon X,Desert Ops,Special Ops, Shadow Ops., Truth Pearl ,Drift

Mr Straight Ball

  • Hero Member
  • *****
  • Posts: 1021
  • 1 board or bust!
Re: Passion Problems
« Reply #10 on: July 04, 2006, 08:12:57 PM »
Bar5003, slap your ball driller to start...

That pin to PAP distance would require a lot of juice in the heads. Plus, why would your driller make the distance from RAD to PAP longer then pin to PAP? Take a look at the drill sheet that comes in the box, that is a layout that makes the ball calm down as it goes down the lane, aka hook-stop reaction.
--------------------
STAY FF MY BLCK!
They call me Mr. Straight Ball because my ball is always bending back.
Logged
Bakes...Bevel is for wimps!!!
Storm Products, Inc. family member
40 Boards & A Ball - www.40boards.com
Storm Products, Inc. - www.stormbowling.com
Ko's Glen Burnie Pro Shop

TheDude

  • Hero Member
  • *****
  • Posts: 3170
Re: Passion Problems
« Reply #11 on: July 08, 2006, 12:48:24 AM »
Dude if your having passion problems call your doctor and ask for the little blue pill.....
--------------------
Timothy @Juniors Pro-Shop
Staff Writer 7-10 Split Magazine,EGO Communications
Montreal, Quebec.
Logged
Timothy @Juniors Pro-Shops
LaSalle, Quebec-Located inside Pont Mercier Lanes.
Keep them honest!

Ebay store updated very often: http://stores.ebay.com/gumby3170?refid+store

Bar5003

  • Hero Member
  • *****
  • Posts: 1627
Re: Passion Problems
« Reply #12 on: July 10, 2006, 09:12:36 PM »
jeeze im only 20 if i got those issues already i got a long life ahead of me
--------------------
~Britton~
Logged
Pages: [1]
« previous next »