win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Rico-drilled Hy-Road?  (Read 2945 times)

dougb

  • Hero Member
  • *****
  • Posts: 1551
Rico-drilled Hy-Road?
« on: August 24, 2009, 10:40:48 AM »
Has anybody tried a rico drill on a Hy-Road?  It seems like a very versatile ball, and rico is a very versatile drill.  

I had the opportunity to compare a Hy-Road to my T-Road Pearl today on both drier lanes and fresh THS.  With very similar layouts, I was surprised at the difference.  Both balls roll very nice through the midlane, with a nice predictable arc, but the Hy-Road's snap at the very last minute was a surprise.  I was standing a good eight boards left of where I was with the T-Road Pearl but aiming for the same breakpoint.  The entry angle was very strong on the Hy-Road, and I am nowhere close to a cranker.

I also compared the Hy-Road to my Columbia 300 Rival, which at 4000 abralon is a great benchmark ball.  Again, the Hy-Road was stronger on both lane conditions and I was a good six boards left.  

Seems like the Hy-Road would lend itself to a rico drill, but none of the reviews had that.  Just curious...
Logged

 

tomgriffin

  • Jr. Member
  • **
  • Posts: 98
Re: Rico-drilled Hy-Road?
« Reply #1 on: August 25, 2009, 01:31:44 PM »
I have a rico'd hyroad. Works well.
Logged

FrontTwelv

  • Sr. Member
  • ****
  • Posts: 275
Re: Rico-drilled Hy-Road?
« Reply #2 on: August 25, 2009, 02:49:46 PM »
I as well have my Hy-road with the rico layout.  The ball is still very clean through the heads, med roll through the midlane and nice arc through the pin-deck.  This will make the ball weak though.  I had to add some surface to the HR to get the rxn i was looking for.  It's great when the lanes are dry-er or when the pattern is unpredictable.
--------------------
Drew Jordan
Columbus, OH
Logged

Dan Belcher

  • Hero Member
  • *****
  • Posts: 3954
Re: Rico-drilled Hy-Road?
« Reply #3 on: August 25, 2009, 02:51:34 PM »
quote:
I as well have my Hy-road with the rico layout.  The ball is still very clean through the heads, med roll through the midlane and nice arc through the pin-deck.  This will make the ball weak though.  I had to add some surface to the HR to get the rxn i was looking for.  It's great when the lanes are dry-er or when the pattern is unpredictable.
--------------------
Drew Jordan
Columbus, OH
Your axis point will make a difference in how strong or weak the Rico layout is, since the pin to PAP distance changes if you have a PAP that's 4 inches across, or 5+ inches across from grip center.  This changes when and how the ball flares.
Logged

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Rico-drilled Hy-Road?
« Reply #4 on: August 25, 2009, 03:06:07 PM »
I just can't imagine how great a drill this ball is.....unless there is lots of oil in the heads and midlane with the pin so low.

Never tried one but please advise...

Regards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

n00dlejester

  • Hero Member
  • *****
  • Posts: 3354
  • The Dude Abides
Re: Rico-drilled Hy-Road?
« Reply #5 on: August 25, 2009, 10:16:52 PM »
I have a pin in palm T-Road Pearl, and it's one of my favorite short/light oil balls, and for lanes with a lot of wear and tear.  Clears the heads anywhere, but needs friction to make a move.  My axis is 4.5 over, 3/8 up.  With some surface it can handle more oil, and pretty well too.
--------------------
Proud Supporter of Rob Stone
Obviously, you aren't a golfer.
Some stayed in the foothills, some washed logs like teeth.
Logged
"This is not 'Nam. This is bowling. There are rules."

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Rico-drilled Hy-Road?
« Reply #6 on: August 26, 2009, 08:31:20 AM »
My point exactly....doesn't this drilling need head oil?

Regards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

Randy T

  • Sr. Member
  • ****
  • Posts: 448
Re: Rico-drilled Hy-Road?
« Reply #7 on: August 26, 2009, 01:07:08 PM »
Did it calm the ball down drilling it Rico..

Mine is very angular and turns real hard
--------------------
Why do people keep trying to compare Lane #1 to other equipment.....when there really is no comparison

Best Prices in all of Colorado on Lane #1 equipment....
Logged

dougb

  • Hero Member
  • *****
  • Posts: 1551
Re: Rico-drilled Hy-Road?
« Reply #8 on: August 26, 2009, 04:59:09 PM »
quote:
Did it calm the ball down drilling it Rico..

Mine is very angular and turns real hard


Would like to hear from tomgriffin on this.  I bough the Hy-Road because I needed something angular that could handle most lane conditions.  But I am impressed with the ball enough (and the surface changes the cover takes) to think a Rico drill would be good too.
Logged
Pages: [1]
« previous next »