win a ball from Bowling.com

Author Topic: 607A SE  (Read 25234 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
607A SE
« on: December 31, 1969, 06:00:00 PM »
- Color: Black/Red/Yellow
- Coverstock: “Se 6” Gen1 Reactive
- Finish: 500, 1000, 2000, 2000 Abralon Sanded, Polished with Powerhouse Factory Finish
- Core: Modified Legion
- RG: #16/2.46 #15/2.46 #14/2.51
- Differential: #16/0.039 #15/0.041 #14/0.037
- Reaction: Angular
- Recommended Lane Condition: Typical House Shot/Medium to Medium Heavy Oil
- Ball comes with a microfiber cleaning sack with instructions on its use.
- Description: Why a 6 series ball? Track’s R&D Department developed the 607ASE specifically positioned between the 505A and 715A, presenting a level of performance that bowlers are looking for, right between the two. The core is a modified version of the Legion core used in the Track Temper. Extreme Angularity is the strength of the “SE6” GEN1 coverstock, making this ball a dynamic choice for the oil patterns in typical house shots most competitive league bowlers face. Get it now, because there won’t be another 6 for some time.

 

aagreatmatt

  • Jr. Member
  • **
  • Posts: 12
Re: 607A SE
« Reply #16 on: January 17, 2011, 08:08:50 AM »
LANE CONDITION






Length:

 

Volume:Medium   


Type (THS, Sport Pattern etc):
THS

 



COMMENTS





Likes:Love the colors.. that may be it.



Dislikes: I am a Track freak, so this it touph. I was patiently waiting for the SE to be
released. I was one of the first to get one, and wish I hadn't been. I can't use it, as its so over under for

me. I have 5 games on it, and have had the ball since it was released. I should have never drilled it, and just

put it up on the wall with the Speical edition part showing.



 


PICTURES AND/OR VIDEOS

 

 

 



ecc0_9879

  • Hero Member
  • *****
  • Posts: 1132
Re: 607A SE
« Reply #17 on: January 19, 2011, 01:16:03 PM »
LANE CONDITION






Length:40ft

 

Volume:medium


Type (THS, Sport Pattern etc):THS


 



COMMENTS





Likes:Lenght Super angular movement



Dislikes: none to strong

 

Well to start this ball is way stronger than I ever expected. This ball is srait as an arrow and finally when you believe the ball is never going to recover it makes the most angular move i have ever seen. I love the hit and carry off pocket hits still seem to carry. Over all I would recommend this ball to anyone looking for a extreamly angular movement with better than average carry. One other final thought I havnt had the ball skate on me yet cant say it wont but I havnt had it happen. Ball seems to have way to much movement to have a little oil flatten it out. Well thanks for reading the review hope it is helpful. My specs are in my profile.

 


PICTURES AND/OR VIDEOS

 

 

 


http://s572.photobucket.com/albums/ss169/ecco_9879/

JagBrew

  • Jr. Member
  • **
  • Posts: 18
Re: 607A SE
« Reply #18 on: January 19, 2011, 09:01:00 PM »
LANE CONDITION






Length: 39

 

Volume: Medium


Type (THS, Sport Pattern etc): THS


 



COMMENTS




I got this ball last night, I was a little worried that it would be similar to the Midnight Vibe I already had, but was pleasantly suprised that it was a much strong ball downlane.  I don't do the whole know the angles and such, however it's pin up, just up and right of the ring finger, stacked with just to the right of the thumb, no weight hole needed.

 

When I first got the ball found it to be squirty and over under..  so took some advice I saw on the forum had them hit it with 4000, no polish added, and then got a very consistent angular movement in the back.   I am about 15mph bowler, plenty of hand, so was thowing the ball accross 15 at the arrows out to 3-4 at the breakpoint and wham left turn into the pocket.  First 7 strikes after the 4000 added.  Pulled a couple, thumb was a little snug, but through a 236 and 233 for it's inaugural games.  This gave me what I want with a good snap on the back, but it would hold if tugged in to 10 at the break..

 

Very impressed with what I thought would end up being a copy of what I have..  just blisters the pins whin in the pocket...  left a couple of 4's but no 10's.

 


PICTURES AND/OR VIDEOS

 

 

 



Perfect Approach Pro Shop

  • Sr. Member
  • ****
  • Posts: 339
Re: 607A SE
« Reply #19 on: January 25, 2011, 01:17:51 AM »
BALL SPECS


Pin Length: 3.5   


Starting Top Weight: 2.75


Ball Weight: 14.02


 


DRILL PATTERN


Pin to PAP: 4 1/2 (Drilled 60 x 4 1/2 x 45)


CG to PAP:


X Hole (if there is one): P2 weight hole.  3/4", 2" deep.

 





BOWLER STYLE


Rev Rate: Med (never had rev rate analyzed)


Ball Speed: 14.25 - 14.75

 

PAP/Track: over 5 3/4 up 3/4


 




SURFACE PREP


Grit: OOB


Type: (Matte, Polish, Sanded): OOB

 




LANE CONDITION


Length: 37'

 

Volume: Medium


Type (THS, Sport Pattern etc): THS


 



BALL REACTION


Length: Very good length. Usually pull this ball out at start of game 3 when my other equipment starts burning up and losing energy at the pocket.


Back End: Very strong as long as I have dry to bump off otherwise ball tends to shoot past breakpoint.

 

Overall Hook:


Midlane Read:


Breakpoint Shape:


 




COMMENTS


Likes: Ease that the ball gets through the heads and maintaining energy on backend. As long as backends are clean, ball has excellent recovery. Any carrydown, ball struggles to recover and make it back. In line with other review, if I were to hit it with 2000 or 4000 abralon, ball would be a little more predictable but then I would be duplicating my other arsenal. Leaving OOB, I have a great go-to-ball my third game during second shift leagues.


Dislikes: Color. Track has some unique color schemes. Was initially hoping for this to be my benchmark ball and was very disappointed in the beginning. Once I realized the time and place to use this ball, I have been completely satisfied with it.


 


PICTURES AND/OR VIDEOS

 

 

 


J. Helton
Perfect Approach Pro Shop
J. Helton
Perfect Approach Pro Shop

ecc0_9879

  • Hero Member
  • *****
  • Posts: 1132
Re: 607A SE
« Reply #20 on: January 30, 2011, 12:47:23 PM »
LANE CONDITION






Length:about 40 feet

 

Volume:medium


Type (THS, Sport Pattern etc):THS


 



COMMENTS





Likes:lenght


Dislikes: 


Bought this ball in trial to see if it was as angular as they said so i decided to order a long pin around 4 inches and drilled it pin high above bridge and mb is 3 inches right of thumb with a hole in the lower quadrant. First off the ball was the most angular skid flip ball I have ever seen. This ball is way stronger than expected. This ball in my opinion for me was the strongest polished ball I have ever thrown about 5-6 boards stronger than my Mutant Cell Pearl. Hitting power of the ball is great carry is good but noticed some corners and a few 9s. The ball is almost to angular if there is such a thing. My specs are in my profile hope this review woks and helps others.

 

 

 

 

 


PICTURES AND/OR VIDEOS

 

 

 


http://s572.photobucket.com/albums/ss169/ecco_9879/

Mike Austin

  • Hero Member
  • *****
  • Posts: 2057
Re: 607A SE
« Reply #21 on: February 08, 2011, 02:08:38 PM »
BALL SPECS


Pin Length: 3 3/4


Starting Top Weight: 3 1/8


Ball Weight: 15lbs 4oz


 


DRILL PATTERN


Pin to PAP: 4 3/4


CG to PAP: Mass bias is about 45 degrees


X Hole (if there is one): P3

 





BOWLER STYLE


Rev Rate: Medium, 300-350??


Ball Speed: about 16 mph

 

PAP/Track:4 9/16 over and 3/4 up


 




SURFACE PREP


Grit: added Rough Buff


Type: (Matte, Polish, Sanded): Polished

 




LANE CONDITION


Length: 38 and 41 feet

 

Volume: as much as 100 units in the middle of the lane.


Type (THS, Sport Pattern etc): THS


 



BALL REACTION


Length: Very long, very easy length


Back End: Very strong on some dry, need some dry back ends for this ball to work at it's full potential.

 

Overall Hook: Medium


Midlane Read: Not much midlane read, ball is very clean and is best suited to drier fresh and/or broken down patterns.


Breakpoint Shape: Very sharp on the back end when there is some dry.  Almost a spare ball on heavy oil.  Some over/under when the track breaks down and there is still heavy/fresh oil in the middle.


 




COMMENTS


Likes: Drilled this ball with pin over bridge, 45 X 4 3/4 X 45 (roughly) for you dual angle fans.  Very nice length, for me this ball is great on some dry lanes to broken down conditions.  Great length with plenty of recovery.  My THS had too much oil until recently, and with the pattern change, this ball is awesome.  I can be left of everybody else on the lane, throw right to where everybody else is playing and open up the lane.  High speed players will use this on dry lanes.  Slower speed players will love this ball for the length it gets.


Dislikes: Over/under with box surface on fresh conditions.  Works better on drier fresh, some shorter patterns.


 


PICTURES AND/OR VIDEOS

 

 

 


Mike Austin's Bowling Dynamix Pro Shop
Houston, TX

I'm back doing what I love and couldn't be happier!!!
Mike Austin's Bowling Dynamix Pro Shops
Inside Emerald Bowl
Inside Tomball Bowl
Track Pro Staff Member
Vise Grips Staff Member

gary6830

  • Jr. Member
  • **
  • Posts: 8
Re: 607A SE
« Reply #22 on: April 03, 2011, 03:50:37 PM »
LANE CONDITION






Length:ths

 

Volume:


Type (THS, Sport Pattern etc):


 



COMMENTS





Likes:love this ball gets down the lane great and as help me shoot better scores when my 505t or my 718a is to much for the lanes and got 3 track balls and have raise my avg from 167 to 202 in a very short span and still climbing over 200 again also looking to get the 300c in a couple of weeks Dislikes: nothing so far love the color also


 


PICTURES AND/OR VIDEOS

 

 

 



gary6830

  • Jr. Member
  • **
  • Posts: 8
Re: 607A SE
« Reply #23 on: April 06, 2011, 09:20:18 PM »
LANE CONDITION






Length:ths

 

Volume:


Type (THS, Sport Pattern etc):


 



COMMENTS





Likes:love this ball shot 628 first night out once i learn to control it should shoot even better with it


Dislikes: ball is little to polish up for me had to dull it up to get more hook i was looking for


 


PICTURES AND/OR VIDEOS

 

 

 



smedichi

  • Newbie
  • *
  • Posts: 2
Re: 607A SE
« Reply #24 on: April 27, 2011, 08:25:20 AM »
LANE CONDITION






Length:

 

Volume:


Type (THS, Sport Pattern etc):Typical league conditions


 



COMMENTS





Likes:This has got to be the best ball I have. After I had this drilled to specs and began to use it my scores have improved dramaticly. I am an avid Track user and have been for many years. The 607A SE would be the ball I would  recomend to anyone who wants to make a difference in thier game. It rolls true and has a clean finish thru the pins with massive pin action.


Dislikes: 


 


PICTURES AND/OR VIDEOS

 

 

 



jutterbowl

  • Jr. Member
  • **
  • Posts: 13
Re: 607A SE
« Reply #25 on: August 03, 2011, 06:10:38 PM »
LANE CONDITION






Length:40

 

Volume:med heavy   


Type (THS, Sport Pattern etc):THS


 



COMMENTS





Likes:Very Strong roll   


Dislikes: plays weel up track area    inside of 20 ball seems to lose carry 


PICTURES AND/OR VIDEOS

 

 

 



Monster Stitch

  • Hero Member
  • *****
  • Posts: 1490
Re: 607A SE
« Reply #26 on: January 10, 2012, 03:53:18 PM »
SPECS

 
Weight: 15lbs


Pin: 4 inches


Top: 3oz


 


LAYOUT


Pin 5 inches from PAP


MB 4 inches from PAP


Pin over ring, MB 2.5 right of thumb


Weight hole on Val 5-5/8 from center of span through the CG down

Surface redone at 1000 abralon with Motiv Polish giving it a flat sheen shine



LANE CONDITION











Length: 38ft


 


Volume: N/A



Type (THS, Sport Pattern etc):THS



 






COMMENTS









Likes: Clean through the front with a nice angular backend. Best reaction on second shift tournament shots when lanes are really wet/dry with blended backs. I used this ball at our City Mixed Tournament and shot 300-226-236 = 762.

 
Dislikes: Not good on Medium Heavy to Heavy Oil, Over under with out of box surface due to glossy surface.





 




PICTURES AND/OR VIDEOS


 


 


 


 
Edited on 1/11/2012 at 4:01 PM

loose5682

  • Hero Member
  • *****
  • Posts: 1466
607A SE
« Reply #27 on: June 11, 2012, 07:26:32 PM »
LANE CONDITION

Length: 40'

Volume: medium-light to medium amount of volume overall, typical house shot puddle in the middle

Type (THS, Sport Pattern etc): THS

--AND--

Length: 39'

Volume: medium to medium-heavy amount of volume, quick breakdown

Type (THS, Sport Pattern etc): Modified USBC OC pattern (Baton Rouge, 2012, adjustment = decreased volume outside of 5 by 50%)

COMMENTS

Likes:The 607A-SE is the closest Track ball i've had to being "skid/flip" (please note, I have not yet thrown a 508A, 811A-SE, 706A, or 300A) as the very nature of this ball is effortless length with a strong angular motion off the spot.  This ball is ideal for when the lanes begin to breakdown, the head oil starts to disappear, and there is minimal carrydown in the backend - picture second shift leagues, lighter volume Sport and House shots, and games 5-8 of PBA Regionals (assuming you are right-handed...).  I have had a lot of success with this ball during games 3 and 4 of my summer league that uses a modified version of the Baton Rouge USBC OC pattern (see above for short description) as the lanes have begun to breakdown a bit and a lot of the volume that is in the front part of the lane has dissipated.  My layout for this ball is 65x4 3/4x45 which is my favorite layout to use when i'm looking for a "skid/flip" reaction or need to play from an inside angle - despite being a good "skid/flip" option this ball is still very versatile in my opinion as i'm able to play almost anywhere on the lane using either weaker or stronger hand positions, making it a very good benchmark-type ball

This ball caters to either slower-speed bowlers who need helping getting the ball to push through the front part of the lane or bowlers who are looking for a ball that is great on second shift that will let them open up the lane and allow them to "get the ball back from anywhere"

Dislikes: It has been my experience that this ball does not take to surface changes very well, i've only ever had success with the ball being polished - mind you, there are other balls available that are better for the intended purpose of knocking the shine off of a 607A-SE so this isn't exactly a tragic thing, just an observation



PICTURES AND/OR VIDEOS
Just because you can, doesn't mean you should