win a ball from Bowling.com

Author Topic: Rule  (Read 12050 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Rule
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: Not Available
bowling.com has the largest selection of bowling balls
Click here to shop.

Rule

The rules of the game have changed. New from Track, the Rule uses the Morpheus 2.0 core and takes it to the next level, adding the rev-enhancing lever so the ball revs faster, responds to friction better and gives you more angle on the back end. We topped this improved core with our new Goo coverstock, which gives you more friction in oil without giving up the back end angularity offered by the core. This cutting-edge combination of Track technology makes the Rule unstoppable and lets you redefine the rules of your own game.

Drill Patterns
Magic 8  
 

Rule Specs
Hook Rating 40-30  
Length 5.0  
Backend 9.0  
Core Technology Morpheus Rev-Lever  
Core Power 8.5  
RG 2.53  
Differential 0.046  
Determinator Spin Time 6.0  
Flare Potential 5.5  
Coverstock Goo Reactive  
Friction Rating 9.5  
Finish Mega-Smooth  
Polish Clean N Sheen  
Reaction Shape Strong Arc  
Lane Condition Heavy to Medium Oil  

 

DynoLess Daddy

  • Sr. Member
  • ****
  • Posts: 369
Re: Rule
« Reply #1 on: August 26, 2004, 05:47:18 PM »
All I can say is WOW!!
I drilled  the ball 5 x 5 and polished to 1200 grit degree polish.
I did this inorder to match the ball up to a particular house pattern!!

The ball did everything I expected. It had great recovery and drive. It actually stayed strong through light carry down. I can only imagine what it will do when used out of box.

I will  test for a couple weeks and thenm take the shine off and update this review. This ball has complimented my phenom unleased so far.(18 Games)
--------------------
My Dt likes to bash Shawn B.

note the truth>>>>>(Dt..1st .... Shawn 2nd)

VISE AMATEUR STAFF
Dynodaddy@earthlink.net
www.dynothane.com

Precision

  • Jr. Member
  • **
  • Posts: 13
Re: Rule
« Reply #2 on: August 26, 2004, 08:53:39 PM »
Track Rule

The ball being drilled was 4” pin out with 4.00 oz top weight. Top weight and CG location were verified via scale along with PSA via Determinator prior to drilling.

The drilling chosen was pin 5.25” from PAP and Mb 2.25” from PAP (22 degrees); pin is above fingers 3.75 inches above grip midline.
 
After drilling the ball was weighed at 0.5 oz positive side weight, 0.375 positive finger weight and 2.25 oz top weight. A 43/64 weight hole was drilled 2.25” deep 6.25” over and 3” down to achieve these weights. Spin time was recorded at 7.9 seconds.

Bowler Information:
Track diameter is 10.25”.
PAP is measured at 5.5” over and 0” up/down.
Average ball speed (foul line to head pin) is 17 mph.
Axis rotation is typically 45 degrees
Initial rev rate is typically 350 rpm

The ball was originally used on a THS (the center has gone beyond stupid with this pattern) with the box surface intact. The surface matched up very well with the amount of conditioner in the center of the lane and I was amazed at how it still came back with some energy left when I sent it outside ten (the center decided it would be a good idea to use NO conditioner outside of 10 past 12 feet with a 40 foot pattern, if I try to use my normal release with my Blue Dot outside 10 I can’t keep the ball on the right side). But, it was clear that when the center takes 20 boards out of play and forces you play the 19 boards they did condition with a ball this strong which is looking to hook more than those 19 boards you’re just going to be fighting it if you don’t take a trip to the spinner for a little help. I was still amazed though that I could still make this one work on this type of condition with the box surface if I HAD to. Even so I did take a trip to the spinner and alter the box surface. I used 2000G Abralon followed up with 4000G Abralon which gave the Rule a polished like surface without the aid of polish. The reaction I received with this surface on the same THS was incredible. I bowled 17 games straight because I was having SO much fun with this ball, it would do just about anything I asked of it. With the smoother surface I could throw the ball hard into the unconditioned OB and still get a strong reaction off those dry boards while still getting a strong reaction in the heavy conditioner in the middle. What really impressed me was that as we burned up this condition I could use the Rule each and every game while others had to change equipment while they chased the lane. Comparing the Rule to my other Track equipment my Animal is still my biggest hooking ball but the Rule placed a close second just ahead of my Phenom Unleashed. Of these three balls though the Rule is clearly the most versatile and has earned a spot in my bag wherever I go.

Precision
Precision

htotheizzo3561

  • Hero Member
  • *****
  • Posts: 962
Re: Rule
« Reply #3 on: August 31, 2004, 07:27:05 PM »
Actually got 2 of them.  both 15 with a 3 inch pin and about 3 oz on both.  Drilled up one with a cg kick, kept it in box finish.  Had a lot of hook for a reactive, backend is incredible.  Really like this one. Second one had a 4x5 on it with no axis hole, and polished it.  This gets down the lane and saves a lot for the back.  Practiced with the 2 on a house shot and Pba pattern C, the new one, Really took control of the lane with the cg kick.  The polished one needs a little bit drier lane to function well, but the hook on both is fantastic if you don't like using a heavy particle ball.  This is my second and third track balls, really impressed with the RULE.

DrillMaster49

  • Jr. Member
  • **
  • Posts: 21
Re: Rule
« Reply #4 on: September 08, 2004, 05:02:08 PM »
I have drilled about 10 so far for various customers.  So far everyone is extremely happy with the ball and the reaction they have been getting!  I have yet to see a ball be as aggressive and as smooth as this ball!  The house that my shop is in has a very messed up house shot, its more like a bad sport shot than a house shot!!  The first one I drilled was for a lower rev player that was having trouble getting the ball to wrinkle on the house shot!  I drilled it 3 3/8 X 3 3/8 with MB in strong position and an axis hole, no matter how or where he threw the ball it came back!  Its like the ball new right where the pocket was!  Im not too high on Track Inc. because of some of the people that work there but Im very high on the balls!!  
offthesheetproshop@yahoo.com  The place to go when you wanna take your game "Off the Sheet" !!  Fort Belvoir, VA

Mike Mineman

  • Newbie
  • *
  • Posts: 4
Re: Rule
« Reply #5 on: September 09, 2004, 02:41:43 AM »
I have been on Track Regional PBA staff for 6 years and this is the most amazing ball I have thrown yet.I thought the Unleashed was something but the Rule is much stronger in the mids with an even harder arcing backend than its predecessor.This ball is strictly power with a recovery that is incredible.The ball allows one to really open up the lane even on a slicker pattern .I have one layed out 5" pin ,"over ring" with 5" mb,no hole and a slight coat of reaction plus.I like this ball on medium  to slicker conditions or when I have to open the lane up or when the heads begin to go a little with my other Rule..With the slight shine it pushes through the heads nice with great energy retention.The other Rule is 3 5/8 pin with same mb distance 5" as my other one.This one I left factory finish and I really like this one when the volume is a little heavier or the distance is longer.Even with the dull finish when you miss right into the dry a little it seems to not burn up like many balls do.On very heavy patterns I have read where people prefer the Animal to the Rule.It seems this would be logical since the Animal is particle but I get the Rule to rev up quicker where the Animal has more lope in the early midlane.I bowled on pattern C a few weeks ago and this is what I saw.We will see what happens when we hit pattern B in a few weeks.
--------------------
Mike Mineman      
The Bowler's Shoppe
 Fairview Hts., Il
Track PBA Regional Staff Member

Vitals; speed 17mph,tilt 12 degrees, revs 300,pap 5 3/4 x 1/2 up ,oh yea righty.


10NDPIT

  • Newbie
  • *
  • Posts: 2
Re: Rule
« Reply #6 on: September 10, 2004, 06:01:49 PM »
If you like the Phenom Unleased you will love the Rule!!

The Rule is 5 boards stronger in the backend and will rev harder in the midlane.
The great thing about this ball is the way it hits. It has great continuation through the pindeck. I have not found a condition that this ball will quit on.
The new Goo cover is easy to adjust, and the fact that it has no particle will be a great fit on some wood lanes, because it will get through the heads with ease.
The Rule will fit all styles of play, and with some minor adjustments most lane conditions




russ2

  • Newbie
  • *
  • Posts: 1
Re: Rule
« Reply #7 on: September 12, 2004, 07:52:43 PM »
After using this ball for the first time, I would have to say wow. Does exactly as advertised. Unbelievable hit and is a true oil ball. Not forgiving at all. If you miss your mark, forget about it cause this ball will make you pay. Reality is that this ball is a true test of skill. So if you like the thenom unleashed, you will love this ball.

Dumpdevil6669

  • Newbie
  • *
  • Posts: 1
Re: Rule
« Reply #8 on: September 17, 2004, 05:59:07 AM »
Lately on my league, which I am bowling on wood lanes, I have been having trouble with my animal finishing correctly.  On the wood surface, the particle ball just starts early and rolls out.  I bought the Rule to fix this.  I drilled it to have extreme angle on the backend, being as I am a high speed, lov rev player, the extra length was necessary.  I immediatly noticed that this balls reaction is about ten boards stronger than my animal, on any surface.  It is a great ball, and my favorite track product as of right now, and I throw nothing but Track...  For those who compare it to the Phenom Unleashed, yes it is similar, but definately stronger, much stronger.  I own both, and each ball is different enough to justify having both in my bag.  I give this ball my highest praise...




-shawn

Precision

  • Jr. Member
  • **
  • Posts: 13
Re: Rule
« Reply #9 on: September 17, 2004, 06:11:59 PM »
Track Rule#2
The ball being drilled was 3” pin out with 3.25 oz top weight. Top weight and CG location were verified via scale along with PSA via Determinator prior to drilling.
The drilling chosen was pin 4.25” from PAP and Mb 6.75” from PAP (90 degrees); pin is 2.75 inches above grip midline.
After drilling the ball was weighed at 0.25 oz positive side weight, 0.75 positive finger weight and 0.50 oz top weight. A 19/32 weight hole was drilled 2.50” deep 5.50” over and 1” down to achieve these weights. Spin time was recorded at 7.2 seconds.
Bowler Information:
Track diameter is 10.25”.
PAP is measured at 5.5” over and 0” up/down.
Average ball speed (foul line to head pin) is 17 mph.
Axis rotation is typically 45 degrees
Initial rev rate is typically 350 rpm
Well, I was having so much fun using the first Rule I drilled out I felt another was definitely required (I’m sure you’ll soon hear about me drilling even another). As a complement to my first Rule I wanted to use a drilling that would allow this ball to rev up much later. For this reason I decided to use the drilling I did. I also polished up the surface a little higher than my first Rule. I can’t describe how impressed I am with this ball; both drillings I used give me very distinct reactions that always bring comments by others watching on how well the Rule recovers. The amount of down lane recovery and staying power this ball exhibits are truly amazing. Each time I pull a Rule out of my bag for use it stays in my hand for all 3 games even through the lane transitions. This along with the amount of area this ball gives me is what really makes the Rule a very special ball. I actually can’t remember the last ball that I was able to do this with. The 4 ¼ x 6 ¾ drilling comes through as promised with good flare and hook along with late revs and a hard charging finish.
Precision
Precision

Ernie McCracken

  • Hero Member
  • *****
  • Posts: 1127
Re: Rule
« Reply #10 on: September 18, 2004, 01:59:42 AM »
I've been waiting a long time to post about this new release from the good guys at Track!  I'm a right handed bowler shooting on heavily oiled wood lanes.  I throw 18-19 MPH with high revs.

Ball weight: 15.5 pounds
Top weight: 2.75 ounces
Pin: 4"

I had been struggling with my Phenom and Phenom Unleashed at this one house that I shoot at on Friday nights.  It is by far the heaviest oil that I bowl on.  Anyway, I had been reading up on the Rule and got one.  Thanks to tenpinspro (Rick Leong) for setting it up for me.

The ball is drilled with 5/8 ounce of side weight and 1/4 ounce of finger weight and no weight hole.  The mass bias is in a strong and long position.  One thing is for sure, it goes long and man is it strong!  This thing was everything and more than I could ever have imagined.

The hitting power of the Rule is better than any of my other equipment, which is all Track.  I did, however, manage to wrap a ten pin or two but you'll have that.  It carried the light hits.  It carried the high and hard one a couple of times.  It sends messengers left and right.  It's simply amazing!

I first threw it in practice in box condition.  I knew right off the bat that I'd need to polish this thing to tame it down.  Decided to throw it on the spinner in the shop fast and shine it up.  That was the answer!  With some polish on it, the ball got down the lane, caught some dry boards, and just ripped the rack!  If I missed right, it would come back hard.  If I tugged it a few boards, it would hold and slam the pocket.  

I've got nothing but good things to say about this ball and can't wait to throw it more.  Tonight was my first outing with it and I'm beyond impressed.  Do yourself a favor.  GO OUT AND BUY ONE!



--------------------
Evolutionary.  Revolutionary.

BuddiesProShopcom - Bill

  • Sr. Member
  • ****
  • Posts: 494
Re: Rule
« Reply #11 on: September 18, 2004, 09:49:42 PM »
Chuck at Track was kind enough to send us an X out to test so that we could write a review on this ball.

I laid this ball out according to Rule Drill sheet.  I have a 11 1/2" track, 5 1/2" up 1/2" pap.  I put the Mass Bias 4 1/2 from my PAP and the Pin 4".  The pin was 2 inches above my grip line.

I tested this ball on 4 different shots; 3 house shots and 1 sport shot.  The two medium oil house shots, the ball was long and strong to the pocket. The ball was clean through the head and reved up in the middle, then made a hard move to the pocket about 40 feet.  On the heavier oil house shot, I had to slow my ball speed down to get the ball to recover and start to corner a little earlier.  On a 35 foot sport shot, with heavy volume in the heads, I also found that I had to keep my ball speed slower so that the ball would not miss the break point.  

Most bowlers will not have a problem getting this ball to the pocket, as my normal ball speed is around 18-20 mph.  

I think this is one of Track's strongest backend balls.  If you are looking for more length and backend than the Animal series, pick on of these balls up.

If you have any questions, please email me at Bill@BuddiesProShop.com

Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"
1-866-884-9355
Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"

D

  • Newbie
  • *
  • Posts: 2
Re: Rule
« Reply #12 on: September 26, 2004, 09:26:18 PM »
"RULE" One of the few performance balls with versatility and strength.
Box cover, more than enough ball. Buff w/ Clean + Sheen and you will create more rev potential and deeper entry angle.

I have drilled this Hi-Per. ball many different ways and it hasn't let me down.
Don't be afraid to max this ball out. A label drilling will not do it justice.

Al Muerzo

  • Jr. Member
  • **
  • Posts: 29
Re: Rule
« Reply #13 on: October 17, 2004, 06:06:57 PM »

The Track Rule is another great release from Del Warren and Track, Inc.  He is excellent at matching core strength to coverstocks, with the end result being balls that work on many conditions, oil types and patterns, and both synthetic and wood lanes.

I'm a medium-high rev bowler with the same for ball speed.  I'm right-handed and my PAP is 6" over and 1/2" up.

Ok, now about the ball.  Drilled mine with the pin above my fingers in the grip line.  CG is 3/4" to the right of the center of my grip.  This works out to be a 5 3/4" pin (from PAP) and 5 1/4" CG (from PAP).  Sounds fairly mild on paper, but this ball is strong.  I can play my house shot (36' - 10 to 10 block) and with a dose of Ultimate Black Magic polish, the ball doesn't over-react off the dry.  The coverstock still reads early enough to play inside the oil line (15 board).  The pin carry is what makes this ball so good.  The carry in my house is awful on a good day!  I've used the ball a total of 5 games - 257, 247, 198 (2 solid 8 pins!), 257 and 237.  Not that these scores are out of this world, but with the carry in my house, no one is averaging over 220.

If you're looking for a strong reactive ball, I reccomend the Rule.  If its too strong out of the box, just add some polish.  Thank you Track!

Al Muerzo
Al Muerzo
Southwest US
Arizona

Strapper_Squared

  • Hero Member
  • *****
  • Posts: 4231
Re: Rule
« Reply #14 on: October 20, 2004, 02:26:23 PM »
I picked up a used 15lb Track Rule from JuniorsProShop.  The ball had a 3-4" pin and medium top weight.  Cover of the ball was in mint condition, appeared as if it had only been thrown a few frames.  I plugged the ball up and layed it out in the following fashon:

I wanted a ball that would give me a skid/flip tpye of reaction on medium to medium heavy oil (after my Yeah Baby! proved to be a dud on this condition).  After consulting with some of the Track experts on this site, I decided on a 4 X 4.5 layout.  This placed the pin on the top right edge of my ring finger and the mass bias below and right of the thumb in the strong position.  I placed a weight hole on my VAL about an inch and a half below my PAP.  This brought the ball back to about 3/4 oz side and roughly 1/2 oz thumb.

I wet-sanded the surface of the ball to 800 grit and applied some of my remaining Legends ball polish (that came along with the Yeah Baby!).  This gave the ball a nice high gloss and really let the colors show!  Very nice looking ball!

First shot I threw this ball on was heavier oil house shot on synthetic lanes.  I wasn't able to swing the ball as I had hoped (due to the large amounts of oil present from 8-8 on the lanes), but found a very nice shot almost straight down the boards.  I got lined up with just a slight belly crossing 10 a the arrows out to about 8 at my break point.  The ball cleared the heads extremely well.  I got a good strong movement in the midlane and a very strong backend reaction.  It was not quite a skid/fip reaction, but very close.  With the amount of oil present on the lanes, I was very impressed with the reaction.  No sign of over/under, which I usually get using a polished ball on lots of oil.  

The second shot was at an older house, wood lanes and a medium oil house shot.  This allowed me to get deeper and really open up the lanes.  I was at least 8 boards deeper at the arrows than anyone else on the lanes.  I was playing around 20 at the arrows out to around 10 at the break point.  Everyone else was much tighter, playing down the boards.  Initially, the reaction was wonderful, until some carry down from everyone else started to set in.  This caused some over/under until I decided to move in deeper to get away from it.  I bumped in a little further and played a tighter line, hitting around 23 at the arrows and only swinging the ball out to around 13 or 14 at the break point.  This was the ticket.  I was able to play in the same area for the rest of the night without having to make many adjustments.  The ball had just enough mid-lane to  make the shot playable and plenty of backend to carry the corner pins.  Overall I am very happy with the ball.

With this type of layout, the ball reacts very well from inside lines.  Even when polsihed, the ball is strong enough to play on anything from heavy to medium conditions.  Surprisingly, the ball seems fairly resistant to over/under reaction when polished.  Overall a very nice looking and reacting ball from Track.
--------------------
=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Act like you expect to get into the end zone
Joe Pa

"The looks of International Series balls are also adapted to Asian tastes making the International Series completely customized for Asian bowlers."  - Brusnwick Bowling Web Site
Talk about stereotyping people...
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+