win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Clean and Sheen or Clean and Dull  (Read 529 times)

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Clean and Sheen or Clean and Dull
« on: November 07, 2005, 02:54:39 AM »
Just wondering what the best one is for the GP2? I'm not familiar with either one, so any info would be great.
--------------------
Bring The Pain.
Logged

 

Traumabill

  • Sr. Member
  • ****
  • Posts: 419
Re: Clean and Sheen or Clean and Dull
« Reply #1 on: November 07, 2005, 11:00:03 AM »
If you want the GP2 to be cleaned and left in the out of the box finish, then use Clean and Dull.  Clean and Sheen can used to add some length, especially if used with a spinner.

Bill
Bowling Services Unlimited
www.bsuproshops.com
Vise Inserts Staff
www.viseinserts.com
Logged

clintdaley

  • Hero Member
  • *****
  • Posts: 4246
Re: Clean and Sheen or Clean and Dull
« Reply #2 on: November 07, 2005, 11:06:20 AM »
Bill hit it right on the head!

Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Inside Hunt Club Lanes
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF

http://www.trackbowling.com/

http://www.startabowlingrevolution.com/
Logged









Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: Clean and Sheen or Clean and Dull
« Reply #3 on: November 07, 2005, 11:10:22 AM »
Clean and Dull it is then. I sure don't anymore length with the way mine is drilled. Thanks guys!
--------------------
Bring The Pain.
Logged

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: Clean and Sheen or Clean and Dull
« Reply #4 on: November 07, 2005, 12:12:36 PM »
Fatboy, if you want your GP2 to remain at box finish, then use a Gray Scotch Brite Pad to apply the C&D using almost ZERO PRESSURE to apply it. Then wipe off with wet cloth and then dry with dry cloth. I have had my GP2 since earlier this year and it looks the same today as the new one on the shelf in the pro shop, by using this procedure. DO NOT use a spinner with this procedure.


--------------------
Brick
Logged
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Clean and Sheen or Clean and Dull
« Reply #5 on: November 07, 2005, 01:11:16 PM »
quote:
... Clean and Sheen can used to add some length, especially if used with a spinner.

Bill
Bowling Services Unlimited
www.bsuproshops.com
Vise Inserts Staff
www.viseinserts.com


Bill & Clint,

Please be cautious. People tend to remember the bottom line, but not the "IFs", "ANDS". and "BUTs". YOu might be giving Fatboy8 the wrong impression about C&S.

Clean and SHeen will give a sanded or stock surface GP2 more length, but only because it will change the matte finish to a "sheen" finish.

The general purpose of C&S is to remove sanding lines from a 320/400 grit, sanded, resurfaced ball, sand it to approximately 500 grit, and then provide a roughly 1000 grit compound finish, that is neither a polish nor a matte finish. Thus the name, "Sheen".

--------------------
Bowling: Wish I could help me as much as I seem to help others ...
Life ... is what you make of it. No, really!
Logged
"None are so blind as those who will not see."

C-G ProShop-Carl

  • Hero Member
  • *****
  • Posts: 5825
Re: Clean and Sheen or Clean and Dull
« Reply #6 on: November 09, 2005, 07:26:20 PM »
VERY good points charlest
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff

www.trackbowling.com

www.startabowlingrevolution.com


Tag Team Member #1
Logged
Carl Hurd

Austintown Ohio (Wedgewood Lanes)

900 Global, AMF Staff Bowler

Tag Team Member #1

<b><i>TAG TEAM COACHING!!!!!!</i></b>/
Pages: [1]
« previous next »