win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: xception drill question  (Read 1152 times)

lilphyzx

  • Sr. Member
  • ****
  • Posts: 368
xception drill question
« on: February 15, 2005, 01:37:22 AM »
Hey what would be the best drill to get the most backend out of this ball. And which are better for the ball. Pin up drills or pin low drills.
Logged

 

ashzero

  • Full Member
  • ***
  • Posts: 140
Re: xception drill question
« Reply #1 on: February 15, 2005, 10:22:04 AM »
i have mine drilled pin up.  mb on strong position.

goes FARRRR then BAM!
Logged

stanski

  • Hero Member
  • *****
  • Posts: 2709
Re: xception drill question
« Reply #2 on: February 15, 2005, 02:44:03 PM »
Pin 5 inches from pap, mb in flip position (right of thumb) and pin up will give most bowlers the best backend... However, this can differ based on your style and the type of lanes you want backend on.


--------------------
stanski
Logged

clintdaley

  • Hero Member
  • *****
  • Posts: 4246
Re: xception drill question
« Reply #3 on: February 15, 2005, 02:56:42 PM »
What is your PAP? This will help determine where to place everything.

Thanks!
Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF
Logged









ashzero

  • Full Member
  • ***
  • Posts: 140
Re: xception drill question
« Reply #4 on: February 15, 2005, 02:59:48 PM »
oops, let me clarify.

my mb's close to my thumb (i meant flip position?).

and yes, the ball will exhibit some squirtyness when encountering oil in outside boards (near breakpoint) on freshshots.

it whacks good though.  
Logged

lilphyzx

  • Sr. Member
  • ****
  • Posts: 368
Re: xception drill question
« Reply #5 on: February 15, 2005, 03:02:50 PM »
I actually have no idea where my pap is. Ball driller actually gave me a hard time last time I went in there asking about paps and telling him what people on here say regarding pins and placements next to the pap. He got mad with me and told me not to talk shop if I dont know what im talking about.
Logged

stanski

  • Hero Member
  • *****
  • Posts: 2709
Re: xception drill question
« Reply #6 on: February 15, 2005, 03:02:57 PM »
quote:
oops, let me clarify.

my mb's close to my thumb (i meant flip position?).

and yes, the ball will exhibit some squirtyness when encountering oil in outside boards (near breakpoint) on freshshots.

it whacks good though.  


Flip, strong, all different terms meaning the same thing.... hook! (in the backend has been my experience, which is why i call it the flip position, its like the ball is "flipping" over)
--------------------
stanski
Logged

tenpinspro

  • Hero Member
  • *****
  • Posts: 4161
Re: xception drill question
« Reply #7 on: February 15, 2005, 03:07:42 PM »
quote:
what would be the best drill to get the most backend out of this ball.


Hey lilphzyx,

I'd suggest going with a pin above mid line about 3-3.5 inches and keep the mb in a strong position, right side of your thumb up to about an inch or so.  The pin out will help create length while the mb in a strong position also pushes it downlane to help store energy for the backend.  Hope this helps some...


--------------------
Rick Leong
Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff  
Vise Inserts Staff
Logged
Rick Leong - Ten Pins Pro Shop
Co-Founder - Tag Team Coaching
"El" Presidente of the Legion

fishnic

  • Sr. Member
  • ****
  • Posts: 450
Re: xception drill question
« Reply #8 on: February 15, 2005, 08:11:38 PM »
quote:
--------------------------------------------------------------------------------
I actually have no idea where my pap is. Ball driller actually gave me a hard time last time I went in there asking about paps and telling him what people on here say regarding pins and placements next to the pap. He got mad with me and told me not to talk shop if I dont know what im talking about.
--------------------------------------------------------------------------------

What crawled up his azz and died, i wonder if he even knows what pap is

ps, i have the mb to the right of thumb i forgot were the pin is, it saves up energy nice and comes screaming back.
--------------------


Powered by Track




Logged

icetink

  • Hero Member
  • *****
  • Posts: 1578
Re: xception drill question
« Reply #9 on: February 15, 2005, 08:21:29 PM »
quote:
quote:
I actually have no idea where my pap is. Ball driller actually gave me a hard time last time I went in there asking about paps and telling him what people on here say regarding pins and placements next to the pap. He got mad with me and told me not to talk shop if I dont know what im talking about.


Time to find a new ball driller


Agreed.  If your driller isn't willing to spend time with you, a customer, then you are definitely insignificant to him.  Find a driller who is knowledgable and willing to share info; find someone who's friendly and certified.
--------------------
-Dino
Logged

lilphyzx

  • Sr. Member
  • ****
  • Posts: 368
Re: xception drill question
« Reply #10 on: February 16, 2005, 08:06:23 AM »
yeah sometimes he is really full of crap. He doesnt believe in these sites like this. He thinks that any driller who has put in the time and money to learn the stuff they know wouldnt give up good knowledge for free. Im like man ok whatever. Im thinking about going with a pin above drill. they have been most successful for me. I want to get some bite out of this ball on the backend. My problem as of late has been stuff finishing for me. I dont have a problem getting the ball up the lane, I more or less need the help on the backend.
Logged

lilphyzx

  • Sr. Member
  • ****
  • Posts: 368
Re: xception drill question
« Reply #11 on: February 16, 2005, 08:06:42 AM »
Thanks for the help fellas.
Logged
Pages: [1]
« previous next »