win a ball from Bowling.com

Author Topic: Defining Drilling Terms  (Read 774 times)

Gawron

  • Jr. Member
  • **
  • Posts: 5
Defining Drilling Terms
« on: February 05, 2007, 12:29:34 AM »
I'm reading the drilling chart for the Mean Machine and need help defining the different terms.

Strongly Speed Dominant
Strongly Rev Dominant
Rev and Speed Rate Match
Mildly Rev Dominant
Mildly Speed Dominant

It's been about 15 years since I drilled a ball and the last Track drilling patterns I dealt with were the same as the one that comes with the Inertia.

 

CigarMike

  • Jr. Member
  • **
  • Posts: 24
Re: Defining Drilling Terms
« Reply #1 on: February 05, 2007, 09:10:17 AM »
If a player were to "match up" with their speed and rev rate - their speed & rev rate would be as follows:

15-16mph  -  200-250rp,
16-17mph  -  250-300rpm
17-18mph  -  300-350rpm
18-19mph  -  350-400rpm
19+mph    -  400+rpm

So if they throw the ball 16mph and their reve rate is 250 they would match up.  If their rev rate was 350 with ball speed of 17mph they would be Mildy Rev Dominate.  If their speed is 18mph with a rev rate of 250 they would be Strongly Speed Dominate.  

The ball speed is initial ball speed and not the speed that is typically shown on the score monitors.  The monitors more than likely are giving you the ball speed at or around the pins.  You can add 1 to 2 mph to this reading to get you close to release ball speed.
--------------------
Mike Judy
Track Central Region Sales Manager
http://www.trackbowling.com

Gawron

  • Jr. Member
  • **
  • Posts: 5
Re: Defining Drilling Terms
« Reply #2 on: February 05, 2007, 09:20:36 AM »
Thanks.

Does anyone know a reliable method of determining rev rate?

C-G ProShop-Carl

  • Hero Member
  • *****
  • Posts: 5825
Re: Defining Drilling Terms
« Reply #3 on: February 05, 2007, 09:22:14 AM »
Mike covered it pretty well.


Gawron, where do you normally play the lanes on a typical house shot and with what type of equipment.

The drill patterns for the Mean Machine and the Inertia should be pretty close.

-Carl
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com


Tag Team Member #1

TAG TEAM COACHING!!!!!!/Co-Founder
Carl Hurd

Austintown Ohio (Wedgewood Lanes)

900 Global, AMF Staff Bowler

Tag Team Member #1

<b><i>TAG TEAM COACHING!!!!!!</i></b>/

tenpinspro

  • Hero Member
  • *****
  • Posts: 4161
Re: Defining Drilling Terms
« Reply #4 on: February 05, 2007, 09:27:31 AM »
Hey Gawron,

Here's my definition of these terms, hope it helps some.

Strongly Speed Dominant - Bowler hooks very little, pretty direct to the pocket

Strongly Rev Dominant - Bowler hooks a lot, covers a lot of boards getting back to the pocket

Rev and Speed Rate Match - Bowler has best combination of speed, hook and power

Mildly Rev Dominant - Bowler hooks a fair amount, typically has to cover some boards to get back to the pocket (take a look at my vids, I'm in this category)

Mildly Speed Dominant - Bowler can hook some but may have some trouble on heavier oil shots


--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff  
Vise Inserts Staff
Dexter Advisory Staff
www.Trackbowling.com

Tag Team Coaching - Co-Founder

See profile for Track Ball videos

*El Presidente of the Track Legion

Rick Leong - Ten Pins Pro Shop
Co-Founder - Tag Team Coaching
"El" Presidente of the Legion

Gawron

  • Jr. Member
  • **
  • Posts: 5
Re: Defining Drilling Terms
« Reply #5 on: February 05, 2007, 10:38:27 AM »
I am currently using an Impact Zone. Ball speed at the camera is 14.75 to 15.25.

The center I bowl at in my league is what is giving me fits. The place is VERY old. Because of the age, carry is tough. To complicate things, the pattern plays very long. The break(beginning of build-up in center of lane) is at 8 board and is buffed to 44'. These conditions force me to play the lanes very straight up the boards to maximize carry. I end up at 17 board at the line hitting 8 board at the arrows. The characteristic of this particular condition is a tremendous amount of hold. So much hold that it makes it difficult crossing the center of the lane. The downside is that because the pattern plays so long, the swing area is minimal.

The center I work at runs the same pattern(both centers are owned by the same company). The back end reaction is much stronger which opens up the swing area. Although there is hold, it's much easier getting across the center of the lane. There I'm at 22 board at the line, hitting 9 at the arrows. The carry is what I would describe as above average.

I'm about to buy another ball and I'm looking to open the lane up a little more without sacrificing carry. The few guys that can cover boards in my league have the most issues with carry.