BallReviews

Equipment Boards => Track => Topic started by: Rock77 on September 18, 2004, 01:45:58 AM

Title: Drilling a Sheer Havoc
Post by: Rock77 on September 18, 2004, 01:45:58 AM

I just got my Sheer Havoc and am gonna drill it to fit between my Untamed and my Crunch Time. What kind of drill should I put on it?? Specs are in my profile.
--------------------
I just close my eyes and throw the ball

Title: Re: Drilling a Sheer Havoc
Post by: Rock77 on September 18, 2004, 11:59:57 PM

Anyone??
--------------------
I just close my eyes and throw the ball

Title: Re: Drilling a Sheer Havoc
Post by: tenpinspro on September 20, 2004, 06:45:10 AM

Hey Rock,

How's your CT laid out?  I'm thinking more like a 5x3 or 4x2 type on the Sheer to get it started a little sooner but let me know what the CT is at to compare to, thanks.
--------------------
Rick Leong
Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff  
Vise Inserts Staff

Title: Re: Drilling a Sheer Havoc
Post by: C-G ProShop-Carl on September 20, 2004, 08:01:56 AM

Rock,

I cannot recall how your CT is laid out either. Just figure the Sheer Havoc to fit above it. Rick's suggestions on the layouts are good. My Sheer Havoc starts up pretty early and maintains a very strong arc to the pocket....It is laid out 4x3.5. I am not sure you will want to go with something as strong as that. The Sheer Havoc is yet another ball that Track makes which is VERY driller friendly. Meaning-----it really seems to respond well to the layout that is applied. Some of the people on here that have laid it out to go longer and have a strong move see more of a skid/flip than I do.

Let us know how the CT is laid out and we can go from there.

-EX-
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Advisory Staff

Title: Re: Drilling a Sheer Havoc
Post by: Rock77 on September 20, 2004, 08:25:46 AM

The CT is drilled pin right of ring, cg 1/2" right of grip center.
--------------------
I just close my eyes and throw the ball

Title: Re: Drilling a Sheer Havoc
Post by: tenpinspro on September 20, 2004, 08:38:17 AM

Hey Rock,

In that case, I'd stick with my original suggestion of something like a 4x2 so it can get into a sooner roll and controlled backend.  Surface wise, it's naturally less than the Untamed and drilled to roll sooner will give you a different look than the CT.  Trying to fit that little bit of a gap better to not get any overlap in either direction.  Hope this helps bud...
--------------------
Rick Leong
Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff  
Vise Inserts Staff