BallReviews
Equipment Boards => Track => Topic started by: Buckwild on July 03, 2006, 09:38:51 AM
-
That was fast! I ordered the Artillery last Tuesday, and it arrives in less than a week. The only thing, it came with a 4 inch pin and 4 ounces of top weight. With those specs, how would you lay it out to show its best? I want this to go with:
Agressive
Heat Blast
Desert Heat
--------------------
Buck's going to be in the mix in '06!
-
Buck,
I assume you want it to fit between the Blast and the Aggressive?
4 inch pin and 4oz of TW is not necessarily a bad thing. How is the Aggressive laid out? and the Blast?
-Carl
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio
Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com
www.startabowlingrevolution.com
Tag Team Member #1
-
EX, yes I do.
The Aggressive is laid out 4.5 x 3.5 with a weight hole on the PAP. It has a 3 inch pin, with 3.5 oz. top.
The Blast is drilled 5.5 x 3 with the hole in the thumb positive quadrant.
It has a 5 inch pin, with 2 oz. top.
My PAP is 5.25 x 1/4 up.
Thanks for the reply.
--------------------
Buck's going to be in the mix in '06!
Edited on 7/3/2006 9:26 PM
-
Hey Buck,
I'd go with a 5x4cg with the pin 3.25-3.5 above mid line. This should offer you a nice fit between the stronger cover of the Aggressive (at 4.5) and a little sooner then your Blast (at 5.5). Good luck and keep us posted...
--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff
Vise Inserts Staff
www.Trackbowling.com
www.startabowlingrevolution.com
See profile for Track Ball videos
*El Presidente of the Track Legion
-
Buck,
I actually like Rick's suggestion, probably closer to 3.5 above your midline though.
You are going to love this ball.
-Carl
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio
Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com
www.startabowlingrevolution.com
Tag Team Member #1
-
Thanks! Hopefully I can get it drilled this weekend.
--------------------
Buck's going to be in the mix in '06!