Author Topic: gp2 drilling (Read 686 times)

bct · « **on:** February 17, 2005, 12:28:27 AM »

going to drill mine today pap 4 3/4 over 1/16 up my speed varies with the condition as well as line i play looking for more of a hard charging arc ball 3 to 4 pin 3oz top wt what can i do

tenpinspro · « **Reply #1 on:** February 17, 2005, 09:08:12 AM »

Hey bct,

With a 1/16 up, you don't really have a lot of tilt so most balls will get into a roll for you on an average. You can do a 4-4.25 pin and a 3.5-3.75 mb with the pin 3-3.25 above mid line for some length and strong roll. Actually, what's your speed? If it's around 15-17 mph, you should be fine. If it's faster, I'd lower the mb to about 3.25-3.5 for a little earlier roll. Hope this helps...
--------------------
Rick Leong
Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff
Vise Inserts Staff

Author Topic: gp2 drilling (Read 686 times)

bct

gp2 drilling

tenpinspro

Re: gp2 drilling