win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: AR Surface  (Read 675 times)

Wylie

  • Hero Member
  • *****
  • Posts: 1306
AR Surface
« on: January 19, 2006, 10:12:33 PM »
Ok, picked up a Arsenal Reactive and a Arsenal Aggresive.  In the OOB box on these two, am I going to see enough seperation between them, or am I going to need to hit the AR with a tad of polish?  I want the AR to fit between the AA and my Xception.  All three are drilled pin over ring.  The CG on the AA and the AR are kicked out to the right about an inch and the MB on the X is directly beside the thumb  (right).  What do you guys think?
--------------------
KYLE  

"It's gonna be a good day Tater!"

Member of The Revolution
Track Rules!
Logged

 

C-G ProShop-Carl

  • Hero Member
  • *****
  • Posts: 5825
Re: AR Surface
« Reply #1 on: January 20, 2006, 06:21:47 AM »
Kyle,

OOB you could easily get more overall movement out of the Reactive than the Aggressive. The Reactive is going to backend more. I would say adding a slight bit of Magic Shine to the OOB surface of the Reactive will put it right in the slot that you want it to be.

-Carl
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com
www.startabowlingrevolution.com


Tag Team Member #1
Logged
Carl Hurd

Austintown Ohio (Wedgewood Lanes)

900 Global, AMF Staff Bowler

Tag Team Member #1

<b><i>TAG TEAM COACHING!!!!!!</i></b>/

clintdaley

  • Hero Member
  • *****
  • Posts: 4246
Re: AR Surface
« Reply #2 on: January 20, 2006, 06:24:02 AM »
I think Ex would be right in the long run, however, I am a big fan of trying the ball first to see what you get, then make surface adjustments afterwards. If you polish it right away, if you don't like it, you are going to have to hit it with something to get the shine off, plus, if it was factory surface, its very tough to duplicate that surface again.

Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Inside Hunt Club Lanes
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF

http://www.trackbowling.com/

http://www.startabowlingrevolution.com/
Logged









Wylie

  • Hero Member
  • *****
  • Posts: 1306
Re: AR Surface
« Reply #3 on: January 20, 2006, 07:16:40 AM »
Well, I had to plug the fingers on it, so it will probably get a light resurface anyways.  I'm going to try to work on it this weekend if they quit screwing around in the proshop so I can, lol.  Hopefully, in the next week, I want to have all of my equipment done so I can go practice and throw all of them at the same time to get the surfaces adjusted correctly on a couple of them and finalize my arsenal.
--------------------
KYLE  

"It's gonna be a good day Tater!"

Member of The Revolution
Track Rules!
Logged
Pages: [1]
« previous next »