BallReviews

Equipment Boards => Track => Topic started by: FastTracker33 on November 16, 2006, 01:02:40 PM

Title: More Power Machine pics!! :D
Post by: FastTracker33 on November 16, 2006, 01:02:40 PM: Well i just got my Power Machine in from asb-joe, and it's awesome looking! He did a perfect drill job as well!

Here's the pic.. i'm making a video as soon as my wrist is better

http://i29.photobucket.com/albums/c288/TheOne9110/100_0202.jpg?t=1163735598

this ball is pretty!! can't wait to test it out
--------------------
-BrIan
Track Legion

Action MaX, PoWer MaChine, DEsert HeAt
http://trackbowling.com/
"Track...you Just can't Beat That!"
Title: Re: More Power Machine pics!! :D
Post by: Spider Ball Bowler on November 16, 2006, 09:06:10 PM: watch it sliiiiiiiiiide
--------------------
Stephen

Made in the USA
Title: Re: More Power Machine pics!! :D
Post by: FastTracker33 on November 16, 2006, 09:16:04 PM: watch it striiiiiiiiiiiiiiike lol sorry, i had to do that

quote:
watch it sliiiiiiiiiide
--------------------
Stephen

Made in the USA

--------------------
-BrIan
Track Legion

Action MaX, PoWer MaChine, DEsert HeAt
http://trackbowling.com/
"Track...you Just can't Beat That!"
Title: Re: More Power Machine pics!! :D
Post by: Spider Ball Bowler on November 16, 2006, 09:17:11 PM: Let me know how it works for you....because this is one of the 419 new balls released in the past three weeks that I have been looking to replace my Super Beast.
--------------------
Stephen

Made in the USA
Title: Re: More Power Machine pics!! :D
Post by: shipper50 on November 16, 2006, 09:17:24 PM: Brian,

Your ball is drilled very similar to mine that I just happened to get from Joe. My pin is in the middle above the fingers like yours. The only thing that is different is I don't have a weight hole and your mb is just a bit right of mine.

I don't know how much hand you put in your shot, but I used mine tonight and was really surprised how much the ball let me open up the lane the first game. The shot was on synthetics, supposedly the 10-10, 40 foot shot.

I think you will like this ball as long as there is enough oil to not burn up. You might start leaving 10 pins when the oil starts to go.

By the way, my PM is drilled 4x5 with the layout very much like yours.

Good luck with it.

Shipper
Title: Re: More Power Machine pics!! :D
Post by: FastTracker33 on November 16, 2006, 09:53:49 PM: Thanks for the info shipper! Mine is drilled 5" Pin to PAP with the MB in a strong spot. The x-hole is a little above my PAP, i forget why though, lol. But i can't wait to throw this beast! My bro threw it for one shot tonight, and it out hooked his Hawg Zilla which is drilled stacked leverage!! The Zilla didn't even stand a chance against my ball, lol, and he said he's getting one now!

I advertise good i guess, lol
quote:
Brian,

Your ball is drilled very similar to mine that I just happened to get from Joe. My pin is in the middle above the fingers like yours. The only thing that is different is I don't have a weight hole and your mb is just a bit right of mine.

I don't know how much hand you put in your shot, but I used mine tonight and was really surprised how much the ball let me open up the lane the first game. The shot was on synthetics, supposedly the 10-10, 40 foot shot.

I think you will like this ball as long as there is enough oil to not burn up. You might start leaving 10 pins when the oil starts to go.

By the way, my PM is drilled 4x5 with the layout very much like yours.

Good luck with it.

Shipper

--------------------
-BrIan
Track Legion

Action MaX, PoWer MaChine, DEsert HeAt
http://trackbowling.com/
"Track...you Just can't Beat That!"
Title: Re: More Power Machine pics!! :D
Post by: C-G ProShop-Carl on November 16, 2006, 10:11:25 PM: Just drilled up Power Machine #3 tonight with nearly the same layout..........very good length and awesome turn in the backend. Once I was able to use it(the backends were tighter tonight than normal) I threw 16 out of 19 strikes with it....so I am happy.

I have 3 of them drilled up with totally different layouts and I can use them on nearly any condition.

-Carl
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com

Tag Team Member #1

TAG TEAM COACHING!!!!!!
Title: Re: More Power Machine pics!! :D
Post by: FastTracker33 on November 16, 2006, 10:12:37 PM: One word... NICE! Looks like another winner from Track!!

quote:
Just drilled up Power Machine #3 tonight with nearly the same layout..........very good length and awesome turn in the backend. Once I was able to use it(the backends were tighter tonight than normal) I threw 16 out of 19 strikes with it....so I am happy.

I have 3 of them drilled up with totally different layouts and I can use them on nearly any condition.

-Carl
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com

Tag Team Member #1

TAG TEAM COACHING!!!!!!

--------------------
-BrIan
Track Legion

Action MaX, PoWer MaChine, DEsert HeAt
http://trackbowling.com/
"Track...you Just can't Beat That!"
Title: Re: More Power Machine pics!! :D
Post by: Spider Ball Bowler on November 16, 2006, 10:30:45 PM: So this ball is stronger than the Radical Inferno I suppose? I had a Radical and I saw it go long, but it just kept going....this may be a nice ball for me then. If it actually back ends.
--------------------
Stephen

Made in the USA
Title: Re: More Power Machine pics!! :D
Post by: C-G ProShop-Carl on November 16, 2006, 10:35:14 PM: I have yet to see it NOT corner. It is much stronger than any of the Radicals I have seen thrown.
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com

Tag Team Member #1

TAG TEAM COACHING!!!!!!
Title: Re: More Power Machine pics!! :D
Post by: Spider Ball Bowler on November 16, 2006, 10:37:56 PM: well then....hmmm I have a polished Ultimate Inferno and a X Factor Ace which is also pretty polished...and I wanted a solid like a Black Widow or No Mercy, but maybe this would be better for me?
--------------------
Stephen

Made in the USA
Title: Re: More Power Machine pics!! :D
Post by: SteveAustin2808 on November 16, 2006, 11:12:19 PM: HEY CARL!

3 POWER MACHINES?!? Uh oh! Someone is turning into how Clint use to be!

HA HA! I made a funny!

God Bless You All and have a great week!

--Michael--
--------------------
What Are You Waiting For?!? Get on the FASTTRACK to success!!

TRACK -- Building Success Stories, One Bowler at a Time!

TRACK -- YOU JUST CAN'T BEAT THAT!!!

McCorvey's Pro Shop Supporter
http://http://www.mccorveysproshop.com/

Evolution Tag Team Member # 1
Title: Re: More Power Machine pics!! :D
Post by: Brickguy221 on November 16, 2006, 11:16:32 PM: quote:
HEY CARL!

3 POWER MACHINES?!? Uh oh! Someone is turning into how Clint use to be!

Well he has worked a bit with Clint recently, so maybe some of Clint rubbed off on him when they touched shoulders.
--------------------
Brick
Title: Re: More Power Machine pics!! :D
Post by: Mark T. Trgovac on November 17, 2006, 02:32:54 AM: Well 3 of a ball that carl likes is normal for him, I mean he had 2 animals, 3 xceptions, 4 gp2s, 2 rules, 2 delta 1s, 2 or 3 robo, 2 machines, 2 mean machines. This is just normal carl, and I tryed this new power machine after league and I liked it alot. Reminded me of the 5.0. Also brickguy if you want to try a low spin time ball get the xception 5.0. Spin time of 5.0 and reacted great.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Offical "Spokesman"
Youngstown, Ohio

"The Revolution has started. The sides were drawn, and if you didnt Choose the side ofEvolution you will fall to the power that it has."

and I said "PLEASE, I ONLY WANT TO GET ONE MORE BALL." he responded "THAT WAS WHAT 12 BALLS AGO." I said back "WELL, YA BUT THAT IS NOT THE POINT."

"Freak Bowling Ball cleaner of the TRACK Revolution."
Title: Re: More Power Machine pics!! :D
Post by: Rev_O on November 17, 2006, 08:06:39 AM: quote:
Just drilled up Power Machine #3 tonight with nearly the same layout..........very good length and awesome turn in the backend. Once I was able to use it(the backends were tighter tonight than normal) I threw 16 out of 19 strikes with it....so I am happy.

I have 3 of them drilled up with totally different layouts and I can use them on nearly any condition.

-Carl
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)

]
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com

Tag Team Member #1

TAG TEAM COACHING!!!!!!

OH NO!! Carl has CLINTitis. only 7 more and you'll have a Clint arsenal!
--------------------
Rev-O

Free Agent, and Lovin' It!!
Title: Re: More Power Machine pics!! :D
Post by: clintdaley on November 17, 2006, 08:15:30 AM: It MIGHT have something to do with the fact I was with Carl last week and this week as well.....hmmm.......

Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Inside Hunt Club Lanes
Salem, Ohio 44460

MoRich pro shop staff

www.letsgobowlingdaley.com

I NOW ACCEPT ALL CREDIT CARDS, NO MORE NEED FOR PAYPAL OR MONEY ORDERS IF WE DON'T HAVE TO....JUST PM ME TO GET MY SHOP NUMBER TO COMPLETE THE TRANSACTION!
Title: Re: More Power Machine pics!! :D
Post by: Xfest on November 17, 2006, 05:10:17 PM: Hehhhh. Looks good buddy. One of my favorite drillings..

Pin Up, MD About an inch right of thumb and.. Good layout for you. You should be able to score high with this.
--------------------
ÃˆĻ ArsenÃ¨l - Do I need anymore?
Track Mean Machine Lane #1 Solid Cobalt Bomb
Storm Paradigm Lane #1 Dirty Bomb
Track Machine Track Equation
Lanemasters The Buzz Columbia Wicked B/R/T
Track Desert Heat Brunswick Spiral Viz-a-Ball